linux.git/arch/arc/boot, branch v4.11

ARC: vdk: Fix support of UIO

2017-03-24T20:36:08+00:00

MotherBoard section has its "ranges" set to 0xE000_0000-0xF000_0000.
But UIO node maps 4 different areas in different memory locations
and all outside MB's ranges.

That obviously breaks UIO mappings in runtime.

Cc: Ruud Derwig 
Cc: stable@vger.kernel.org
Signed-off-by: Alexey Brodkin 
Signed-off-by: Vineet Gupta

ARC: [dts] add cpu nodes to ARCHS SMP device tree

2017-03-06T04:04:59+00:00

Trying to get clock for CPU cores on SMP systems I found that I was only
able to get clock for core[0]. That was because only one cpu@0 node was
represented in ARC HS device tree and it was impossible to get clock for
"non-existing" cores.

So as ARC HS may have up to 4 cores we update device tree to match
maximum possible cores quantity.

Signed-off-by: Vlad Zakharov 
Signed-off-by: Vineet Gupta

ARC: [dts] add input clocks for cpu nodes

2017-03-06T04:04:59+00:00

ARC CPU cores are driven by core_clk so we add corresponding "clocks"
property to ARC cpu nodes.

Signed-off-by: Vlad Zakharov 
Signed-off-by: Vineet Gupta

ARCv2: intc: Delete useless comments in Device Trees

2017-02-06T17:37:57+00:00

Signed-off-by: Yuriy Kolerov 
Signed-off-by: Vineet Gupta

ARCv2: IDU-intc: Delete deprecated parameters in Device Trees

2017-02-06T17:37:57+00:00

No need for specifying a list of interrupts in the declaration
of IDU interrupt controller anymore since the kernel can obtain
a number of supported interrupts from the build register.

Also delete support of the second parameter for devices which
are connected to IDU because it is not used anywhere.

Signed-off-by: Yuriy Kolerov 
Signed-off-by: Vineet Gupta

arc: vdk: Add support of UIO

2017-02-06T17:37:57+00:00

ARC VDK for EVSS uses UIO for communication with Embedded Vision
Subsystem.

Signed-off-by: Alexey Brodkin 
Signed-off-by: Vineet Gupta

arc: vdk: Add support of MMC controller

2017-02-06T17:37:57+00:00

ARC VDK virtual platform emulates host MMC controller (DW Mobile Storage)
and moreover rootfs is situated on that virtual card.

Signed-off-by: Alexey Brodkin 
Signed-off-by: Vineet Gupta

Merge tag 'arc-4.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

2016-12-15T22:15:17+00:00

Pull ARC updates from Vineet Gupta:
 "These are mostly timer/clocksource driver updates which were
  Reviewed/Acked by Daniel but had to be merged via ARC tree due to
  dependencies.

  I will follow up with another pull request with actual ARC changes
  early next week !

  Summary:

   - Moving ARC timer driver into drivers/clocksource

   - EZChip timer driver updates [Noam]

   - ARC AXS103 and HAPS platform updates [Alexey]"

* tag 'arc-4.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: axs10x: really enable ARC PGU
  ARC: rename Zebu platform support to HAPS
  clocksource: nps: avoid maybe-uninitialized warning
  clocksource: Add clockevent support to NPS400 driver
  clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer
  soc: Support for NPS HW scheduling
  clocksource: import ARC timer driver
  ARC: breakout timer include code into separate header ...
  ARC: move mcip.h into include/soc and adjust the includes
  ARC: breakout aux handling into a separate header
  ARC: time: move time_init() out of the driver
  ARC: timer: gfrc, rtc: build under same option (64-bit timers)
  ARC: timer: gfrc, rtc: Read BCR to detect whether hardware exists ...
  ARC: timer: gfrc, rtc: deuglify big endian code

Merge tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2016-12-15T04:42:45+00:00

Pull dmaengine updates from Vinod Koul:
 "Fairly routine update this time around with all changes specific to
  drivers:

   - New driver for STMicroelectronics FDMA
   - Memory-to-memory transfers on dw dmac
   - Support for slave maps on pl08x devices
   - Bunch of driver fixes to use dma_pool_zalloc
   - Bunch of compile and warning fixes spread across drivers"

[ The ST FDMA driver already came in earlier through the remoteproc tree ]

* tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
  dmaengine: sirf-dma: remove unused ‘sdesc’
  dmaengine: pl330: remove unused ‘regs’
  dmaengine: s3c24xx: remove unused ‘cdata’
  dmaengine: stm32-dma: remove unused ‘src_addr’
  dmaengine: stm32-dma: remove unused ‘dst_addr’
  dmaengine: stm32-dma: remove unused ‘sfcr’
  dmaengine: pch_dma: remove unused ‘cookie’
  dmaengine: mic_x100_dma: remove unused ‘data’
  dmaengine: img-mdc: remove unused ‘prev_phys’
  dmaengine: usb-dmac: remove unused ‘uchan’
  dmaengine: ioat: remove unused ‘res’
  dmaengine: ioat: remove unused ‘ioat_dma’
  dmaengine: ioat: remove unused ‘is_raid_device’
  dmaengine: pl330: do not generate unaligned access
  dmaengine: k3dma: move to dma_pool_zalloc
  dmaengine: at_hdmac: move to dma_pool_zalloc
  dmaengine: at_xdmac: don't restore unsaved status
  dmaengine: ioat: set error code on failures
  dmaengine: ioat: set error code on failures
  dmaengine: DW DMAC: add multi-block property to device tree
  ...

ARC: axs10x: really enable ARC PGU

2016-11-30T19:54:25+00:00

Up until now we had ARC PGU not enabled in axs10x defconfigs trying
to not bloat kernel image again with yet another drivers and subsystems.

This change configures ARC PGU (as well as DRM bits it depends on)
to be built as a module and so those who need LCD screen to work on
axs10x may bundle built .ko files in their target's file-system with
help of the following command on host:
------------->8-------------
make INSTALL_MOD_PATH=_path_to_target_fs_ modules_install
------------->8-------------

and later on target with commands as simple as:
------------->8-------------
modprobe adv7511.ko
modprobe arcpgu.ko
------------->8-------------
get LCD working.

Signed-off-by: Alexey Brodkin 
Signed-off-by: Vineet Gupta