linux.git/arch/alpha/kernel, branch v2.6.17

[PATCH] alpha: SMP IRQ routing fix

2006-06-05T19:29:16+00:00

From: Ivan Kokshaysky 

After removal of fixup_cpu_present_map() function Alpha ended up with an empty
cpu_present_map, so secondary CPUs on SMP systems are not being started.

Worse, on some platforms we route interrupts to secondary CPUs using
cpu_possible_map which is still populated properly.  As a result, these
interrupts go nowhere so the machines like DP264 aren't able to boot even with
a primary CPU.

Fixed basically by s/cpu_present_mask/cpu_present_map/.

Thanks to Ernst Herzberg for reporting the bug and testing the fix.

Cc: Ernst Herzberg 
Cc: Richard Henderson 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] No arch-specific strpbrk implementations

2006-04-11T13:18:40+00:00

While cleaning up parisc_ksyms.c earlier, I noticed that strpbrk wasn't
being exported from lib/string.c.  Investigating further, I noticed a
changeset that removed its export and added it to _ksyms.c on a few more
architectures.  The justification was that "other arches do it."

I think this is wrong, since no architecture currently defines
__HAVE_ARCH_STRPBRK, there's no reason for any of them to be exporting it
themselves.  Therefore, consolidate the export to lib/string.c.

Signed-off-by: Kyle McMartin 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] alpha: SMP boot fixes

2006-04-11T13:18:34+00:00

I've encountered two problems with 2.6.16 and newer kernels on my API CS20
(dual 833MHz Alpha 21264b processors).  The first is the kernel OOPSing
because of a NULL pointer dereference while trying to populate SysFS with the
CPU information.  The other is that only one processor was being brought up.
I've included a small Alpha-specific patch that fixes both problems.

The first problem was caused by the CPUs never being properly registered using
register_cpu(), the way it's done on other architectures.

The second problem has to do with the removal of hwrpb_cpu_present_mask in
arch/alpha/kernel/smp.c.  In setup_smp() in the 2.6.15 kernel sources,
hwrpb_cpu_present_mask has a bit set for each processor that is probed, and
afterwards cpu_present_mask is set to the cpumask for the boot CPU.  In the
same function of the same file in the 2.6.16 sources, instead of
hwrpb_cpu_present_mask being set, cpu_possible_map is updated for each probed
CPU.  cpu_present_mask is still set to the cpumask of the boot CPU afterwards.
 The problem lies in include/asm-alpha/smp.h, where cpu_possible_map is
#define'd to be cpu_present_mask.

Cleanups from: Ivan Kokshaysky 

 - cpu_present_mask and cpu_possible_map are essentially the same thing
   on alpha, as it doesn't support CPU hotplug;
 - allocate "struct cpu" only for present CPUs, like sparc64 does.
   Static array of "struct cpu" is just a waste of memory.

Signed-off-by: Brian Uhrain 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Manual merge with Linus.

2006-04-02T05:08:05+00:00

Conflicts:
	arch/powerpc/kernel/setup-common.c
	drivers/input/keyboard/hil_kbd.c
	drivers/input/mouse/hil_ptr.c

[PATCH] unexport get_wchan

2006-03-31T20:19:01+00:00

The only user of get_wchan is the proc fs - and proc can't be built modular.

Signed-off-by: Adrian Bunk 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] Don't pass boot parameters to argv_init[]

2006-03-31T20:18:53+00:00

The boot cmdline is parsed in parse_early_param() and
parse_args(,unknown_bootoption).

And __setup() is used in obsolete_checksetup().

	start_kernel()
		-> parse_args()
			-> unknown_bootoption()
				-> obsolete_checksetup()

If __setup()'s callback (->setup_func()) returns 1 in
obsolete_checksetup(), obsolete_checksetup() thinks a parameter was
handled.

If ->setup_func() returns 0, obsolete_checksetup() tries other
->setup_func().  If all ->setup_func() that matched a parameter returns 0,
a parameter is seted to argv_init[].

Then, when runing /sbin/init or init=app, argv_init[] is passed to the app.
If the app doesn't ignore those arguments, it will warning and exit.

This patch fixes a wrong usage of it, however fixes obvious one only.

Signed-off-by: OGAWA Hirofumi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] RTC: Remove RTC UIP synchronization on Alpha

2006-03-28T17:16:01+00:00

The sync may still be needed for CPU clock calibration but we don't sync in
the regular case.

Signed-off-by: Matt Mackall 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Alessandro Zummo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] Notifier chain update: API changes

2006-03-27T16:44:50+00:00

The kernel's implementation of notifier chains is unsafe.  There is no
protection against entries being added to or removed from a chain while the
chain is in use.  The issues were discussed in this thread:

    http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2

We noticed that notifier chains in the kernel fall into two basic usage
classes:

	"Blocking" chains are always called from a process context
	and the callout routines are allowed to sleep;

	"Atomic" chains can be called from an atomic context and
	the callout routines are not allowed to sleep.

We decided to codify this distinction and make it part of the API.  Therefore
this set of patches introduces three new, parallel APIs: one for blocking
notifiers, one for atomic notifiers, and one for "raw" notifiers (which is
really just the old API under a new name).  New kinds of data structures are
used for the heads of the chains, and new routines are defined for
registration, unregistration, and calling a chain.  The three APIs are
explained in include/linux/notifier.h and their implementation is in
kernel/sys.c.

With atomic and blocking chains, the implementation guarantees that the chain
links will not be corrupted and that chain callers will not get messed up by
entries being added or removed.  For raw chains the implementation provides no
guarantees at all; users of this API must provide their own protections.  (The
idea was that situations may come up where the assumptions of the atomic and
blocking APIs are not appropriate, so it should be possible for users to
handle these things in their own way.)

There are some limitations, which should not be too hard to live with.  For
atomic/blocking chains, registration and unregistration must always be done in
a process context since the chain is protected by a mutex/rwsem.  Also, a
callout routine for a non-raw chain must not try to register or unregister
entries on its own chain.  (This did happen in a couple of places and the code
had to be changed to avoid it.)

Since atomic chains may be called from within an NMI handler, they cannot use
spinlocks for synchronization.  Instead we use RCU.  The overhead falls almost
entirely in the unregister routine, which is okay since unregistration is much
less frequent that calling a chain.

Here is the list of chains that we adjusted and their classifications.  None
of them use the raw API, so for the moment it is only a placeholder.

  ATOMIC CHAINS
  -------------
arch/i386/kernel/traps.c:		i386die_chain
arch/ia64/kernel/traps.c:		ia64die_chain
arch/powerpc/kernel/traps.c:		powerpc_die_chain
arch/sparc64/kernel/traps.c:		sparc64die_chain
arch/x86_64/kernel/traps.c:		die_chain
drivers/char/ipmi/ipmi_si_intf.c:	xaction_notifier_list
kernel/panic.c:				panic_notifier_list
kernel/profile.c:			task_free_notifier
net/bluetooth/hci_core.c:		hci_notifier
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_chain
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_expect_chain
net/ipv6/addrconf.c:			inet6addr_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_expect_chain
net/netlink/af_netlink.c:		netlink_chain

  BLOCKING CHAINS
  ---------------
arch/powerpc/platforms/pseries/reconfig.c:	pSeries_reconfig_chain
arch/s390/kernel/process.c:		idle_chain
arch/x86_64/kernel/process.c		idle_notifier
drivers/base/memory.c:			memory_chain
drivers/cpufreq/cpufreq.c		cpufreq_policy_notifier_list
drivers/cpufreq/cpufreq.c		cpufreq_transition_notifier_list
drivers/macintosh/adb.c:		adb_client_list
drivers/macintosh/via-pmu.c		sleep_notifier_list
drivers/macintosh/via-pmu68k.c		sleep_notifier_list
drivers/macintosh/windfarm_core.c	wf_client_list
drivers/usb/core/notify.c		usb_notifier_list
drivers/video/fbmem.c			fb_notifier_list
kernel/cpu.c				cpu_chain
kernel/module.c				module_notify_list
kernel/profile.c			munmap_notifier
kernel/profile.c			task_exit_notifier
kernel/sys.c				reboot_notifier_list
net/core/dev.c				netdev_chain
net/decnet/dn_dev.c:			dnaddr_chain
net/ipv4/devinet.c:			inetaddr_chain

It's possible that some of these classifications are wrong.  If they are,
please let us know or submit a patch to fix them.  Note that any chain that
gets called very frequently should be atomic, because the rwsem read-locking
used for blocking chains is very likely to incur cache misses on SMP systems.
(However, if the chain's callout routines may sleep then the chain cannot be
atomic.)

The patch set was written by Alan Stern and Chandra Seetharaman, incorporating
material written by Keith Owens and suggestions from Paul McKenney and Andrew
Morton.

[jes@sgi.com: restructure the notifier chain initialization macros]
Signed-off-by: Alan Stern 
Signed-off-by: Chandra Seetharaman 
Signed-off-by: Jes Sorensen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] unify PFN_* macros

2006-03-27T16:44:48+00:00

Just about every architecture defines some macros to do operations on pfns.
 They're all virtually identical.  This patch consolidates all of them.

One minor glitch is that at least i386 uses them in a very skeletal header
file.  To keep away from #include dependency hell, I stuck the new
definitions in a new, isolated header.

Of all of the implementations, sh64 is the only one that varied by a bit.
It used some masks to ensure that any sign-extension got ripped away before
the arithmetic is done.  This has been posted to that sh64 maintainers and
the development list.

Compiles on x86, x86_64, ia64 and ppc64.

Signed-off-by: Dave Hansen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] consolidate sys32/compat_adjtimex

2006-03-26T16:56:57+00:00

Create compat_sys_adjtimex and use it an all appropriate places.

Signed-off-by: Stephen Rothwell 
Cc: Arnd Bergmann 
Acked-by: Paul Mackerras 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds