Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
     around a WiFi device defect; use a quirk or boot-time
     "pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)

   - Always lift 2.5GT/s restriction in PCIe failed link retraining to
     avoid clamping a link to 2.5GT/s after hot-plug changes the device
     (Maciej W. Rozycki)

   - Request bus reassignment when not probe-only to fix an enumeration
     regression on Marvell CN106XX and possibly other DT-based systems
     (Ratheesh Kannoth)

   - Fix procfs race between pci_proc_init() and pci_bus_add_device()
     that resulted in 'proc_dir_entry ... already registered' warnings
     and pointer corruption (Krzysztof Wilczyński)

   - Fix sysfs race that causes 'duplicate filename' warnings and boot
     panics by converting PCI resource files to static attributes
     (Krzysztof Wilczyński)

   - Expose sysfs 'resourceN_resize' attributes only on platforms with
     PCI mmap (Krzysztof Wilczyński)

   - Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
     attributes (Krzysztof Wilczyński)

   - Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
     mmap path to match the generic path (Krzysztof Wilczyński)

   - Use kstrtobool() to parse the 'rom' attribute input to avoid the
     unexpected behavior of enabling the ROM when writing '0' with no
     trailing newline (Krzysztof Wilczyński)

  Resource management:

   - Improve resource claim logging for debuggability (Ilpo Järvinen)

   - Clean up several uses of const parameters (Ilpo Järvinen)

   - Check option ROM header signatures and lengths before accessing to
     avoid page faults and alignment faults (Guixin Liu)

  ASPM:

   - Don't reconfigure ASPM when entering low-power D-state; only do it
     when returning back to D0 (Carlos Bilbao)

  Power management:

   - During suspend, set power state to 'unknown' for all devices, not
     just those with drivers (Lukas Wunner)

   - Skip restoring Resizable BARs and VF Resizable BARs if device
     doesn't respond to config reads, to avoid invalid array accesses
     (Marco Nenciarini)

   - Add pci_suspend_retains_context() so drivers can tell whether
     devices retain internal state across suspend/resume, since some
     platforms reset devices on suspend; use this in nvme to avoid
     issues on Qcom RCs (Manivannan Sadhasivam)

  Power control:

   - Only to power on/off devices that actually support power control to
     avoid poking at incompatible devices mentioned in DT (Manivannan
     Sadhasivam)

  Virtualization and resets:

   - Log device readiness timeouts as errors, not warnings, because the
     device is likely unusable in this case (Bjorn Helgaas)

   - Wait for device readiness after soft reset (D3hot ->
     D0uninitialized transition), when the device may respond with
     Request Retry Status (RRS) if it needs more time to initialize
     (Bjorn Helgaas)

   - Drop unnecessary retries when restoring BARs because resets should
     now already include all required delays (Lukas Wunner)

   - Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
     terminates uncleanly (Jose Ignacio Tornos Martinez)

   - Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
     which seem not to support it correctly (Jose Ignacio Tornos
     Martinez)

  Peer-to-peer DMA:

   - Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
     s390 ISM BARs (Matt Evans)

   - Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)

  Endpoint framework:

   - Add endpoint controller APIs for use by function drivers to
     discover auxiliary blocks like DMA engines (Koichiro Den)

   - Remember DesignWare eDMA engine base/size and expose them via the
     EPC aux-resource API (Koichiro Den)

   - Add endpoint embedded doorbell fallback, used if MSI allocation
     fails (Koichiro Den)

   - Validate BAR index and remove dead BAR read in endpoint doorbell
     test (Carlos Bilbao)

   - Unwind MSI/MSI-X vectors if NTB initialization fails part-way
     through (Koichiro Den)

   - Cache sleepable pci_irq_vector() value at ISR setup to avoid
     calling it from hardirq context (Koichiro Den)

   - Call sleepable pci_epc_raise_irq() from a work item instead of
     atomic context, e.g., when setting bits in NTB peer doorbells in
     the ntb_peer_db_set() path (Koichiro Den)

   - Report 0-based vNTB doorbell vector to account for link event 0 and
     historically skipped slot 1 (Koichiro Den)

   - Prevent configfs writes to vNTB db_count and other values that are
     already in use after EPC attach (Koichiro Den)

   - Account for vNTB db_valid reserved slots (link event 0 and
     historically skipped slot 1) so they don't appear as valid
     doorbells (Koichiro Den)

   - Implement vNTB .db_vector_count()/mask() for doorbells so clients
     can use multiple vectors and avoid thundering herds (Koichiro Den)

   - Report 0-based NTB doorbell vector to account for link event 0 and
     historically skipped slot 1 (Koichiro Den)

   - Fix doorbell bitmask and IRQ vector handling to clear only
     specified bits, use the correct vector for non-contiguous Linux IRQ
     numbers, and validate incoming vectors (Koichiro Den)

   - Implement NTB .db_vector_count()/mask() for doorbells so clients
     can use multiple vectors (Koichiro Den)

  Native PCIe controller infrastructure:

   - Add pci_host_common_link_train_delay() for the mandatory delay
     after > 5GT/s Link training completes and use it for cadence HPA,
     j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)

   - Protect root bus removal with rescan lock in altera, brcmstb,
     cadence, dwc, iproc, mediatek, plda, rockchip to prevent
     use-after-free or crashes when racing with sysfs rescan or hotplug
     (Hans Zhang)

   - Add pci_host_common_parse_ports() for use by any native driver to
     parse Root Port properties (per-Link features like width, speed,
     PHY, power and reset control, etc should be described in Root Port
     stanzas, not the host bridge; currently only reset GPIOs
     implemented) (Sherry Sun)

  New native PCIe controller drivers:

   - Add DT binding and driver for UltraRISC DP1000 PCIe controller
     (Xincheng Zhang, Jia Wang)

  Altera PCIe controller driver:

   - Do not dispose of the parent IRQ mapping, which belongs to the
     parent interrupt controller (Mahesh Vaidya)

   - Fix chained IRQ handler ordering issue and resource leaks on probe
     failure (Mahesh Vaidya)

  AMD MDB PCIe controller driver:

   - Assert PERST# on shutdown so any connected Endpoints are held in
     reset during shutdown (Sai Krishna Musham)

  Amlogic Meson PCIe controller driver:

   - Propagate devm_add_action_or_reset() failure to fix probe error
     path (Shuvam Pandey)

   - Add .remove() callback to deinitialize the host bridge and power
     off the PHY (Shuvam Pandey)

  Broadcom iProc PCIe controller driver:

   - Restore .map_irq() assignment; its removal broke INTx on the iproc
     platform bus driver (Mark Tomlinson)

  Broadcom STB PCIe controller driver:

   - No change, but products using certain WiFi devices may be affected
     by removal of CONFIG_PCIE_BUS_* (see above)

  Freescale i.MX6 PCIe controller driver:

   - Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
     functions (Richard Zhu)

   - Assert PERST# before enabling regulators to ensure that even if
     power is enabled, endpoint stays inactive until REFCLK is stable
     (Sherry Sun)

   - Parse reset properties in Root Port nodes (falling back to host
     bridge) to help support Key E connectors and the pwrctrl framework
     (Sherry Sun)

   - Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)

   - Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
     Zhu)

   - Integrate new pwrctrl API for DTs with Root Port-level power
     supplies (Sherry Sun)

  Intel Gateway PCIe controller driver:

   - Enable clock before PHY init for correct ordering (Florian Eckert)

   - Add .start_link() callback so the driver works again (Florian
     Eckert)

   - Stop overwriting the ATU base address discovered by
     dw_pcie_get_resources() (Florian Eckert)

   - Add DT 'atu' region since this is hardware-specific, and fall back
     to driver default if lacking (Florian Eckert)

  Loongson PCIe controller driver:

   - Ignore downstream devices only on internal bridges to avoid
     Loongson hardware issue (Rong Zhang)

   - Quirk old Loongson-3C6000 bridges that advertise incorrect
     supported link speeds (Ziyao Li)

  Marvell MVEBU PCIe controller driver:

   - Use fixed-width interrupt masks to avoid truncation in 64-bit
     builds (Rosen Penev)

  MediaTek PCIe controller driver:

   - Use FIELD_PREP() to fix incorrect operator precedence in
     PCIE_FTS_NUM_L0 (Li RongQing)

   - Fix IRQ domain leak when port fails to enable (Manivannan
     Sadhasivam)

   - Use actual physical address for MSI message address instead of
     virt_to_phys() (Manivannan Sadhasivam)

   - Add EcoNet EN7528 to DT binding (Caleb James DeLisle)

  MediaTek PCIe Gen3 controller driver:

   - Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
     (PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)

   - Add .shutdown() to assert PERST# before powering down device (Jian
     Yang)

   - Do full device power down on removal, including asserting PERST#,
     when removing driver (Chen-Yu Tsai)

   - Fix a 'failed to create pwrctrl devices' error message that was
     inadvertently skipped (Chen-Yu Tsai)

  NVIDIA Tegra194 PCIe controller driver:

   - Program the DesignWare PORT_AFR L1 entrance latency based on the
     'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)

  Qualcomm PCIe controller driver:

   - Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)

   - Set max OPP during resume so DBI register accesses don't fail with
     NoC errors (Qiang Yu)

   - Add pci_host_common_d3cold_possible() to determine whether
     downstream devices are already in D3hot and wakeup-enabled devices
     are capable of generating PME from D3cold (Krishna Chaitanya
     Chundru)

   - Add .get_ltssm() callback to get the LTSSM status without DBI,
     since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
     Chundru)

   - Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
     avoid power leakage (Krishna Chaitanya Chundru)

   - Decide whether suspend should put the link in L2 and power down
     using pci_host_common_d3cold_possible() instead of checking whether
     ASPM L1 is enabled (Krishna Chaitanya Chundru)

   - Add qcom D3cold support to tear down interconnect bandwidth and OPP
     votes (Krishna Chaitanya Chundru)

   - Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
     RP node while PERST# is in the RC node, but warn about the DT issue
     (Qiang Yu)

   - Program T_POWER_ON based on DT 't-power-on-us' property in case
     hardware advertises incorrect values (Krishna Chaitanya Chundru)

   - Disable ASPM L0s for SA8775P (Shawn Guo)

   - Initialize DWC MSI lock for firmware-managed ECAM hosts, which
     don't use the dw_pcie_host_init() path that initializes the lock
     (Yadu M G)

  Renesas RZ/G3S PCIe controller driver:

   - Add RZ/V2N DT support (Lad Prabhakar)

  SOPHGO PCIe controller driver:

   - Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)

  Synopsys DesignWare PCIe controller driver:

   - Apply ECRC TLP Digest workaround for all DesignWare cores prior to
     5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)

   - Use common struct dw_pcie 'mode' rather than duplicating it in
     artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)

   - Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
     boilerplate and fix a seq_file memory leak by including a
     .release() callback (Hans Zhang)

   - Fix a signedness bug in fault injection test code (Dan Carpenter)

   - Avoid NULL pointer dereference when tearing down debugfs for
     controller that lacks RAS DES capability (Shuvam Pandey)

  MicroSemi Switchtec management driver:

   - Add Gen6 Device IDs (Ben Reed)

  Miscellaneous:

   - Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
     visconti drivers (Andy Shevchenko)

   - Fix typos in documentation (josh ziegler)

   - Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"

* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
  PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
  PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
  PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
  PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
  PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
  alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
  PCI: Add macros for legacy I/O and memory address space sizes
  PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
  alpha/PCI: Convert resource files to static attributes
  alpha/PCI: Add static PCI resource attribute macros
  alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
  alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
  alpha/PCI: Use PCI resource accessor macros
  alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
  alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
  PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
  PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
  PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
  PCI/sysfs: Convert PCI resource files to static attributes
  PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
  ...

Currently, legacy_io and legacy_mem are dynamically allocated and created
by pci_create_legacy_files(), with pci_adjust_legacy_attr() updating the
attributes at runtime on Alpha to rename them and shift the size for sparse
addressing.

Convert to four static const attributes (legacy_io, legacy_io_sparse,
legacy_mem, legacy_mem_sparse) with .is_bin_visible() callbacks that use
pci_legacy_has_sparse() to select the appropriate variant per bus.  The
sizes are compile-time constants and .size is set directly on each
attribute.

Register the groups in pcibus_groups[] under a HAVE_PCI_LEGACY guard so the
driver model handles creation and removal automatically.

Stub out pci_create_legacy_files() and pci_remove_legacy_files() as the
dynamic creation is no longer needed.  Remove the __weak
pci_adjust_legacy_attr(), Alpha's override, and its declaration from both
Alpha and PowerPC asm/pci.h headers.

Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-23-kwilczynski@kernel.org

Currently, Alpha's sparse/dense legacy attribute handling is done via
pci_adjust_legacy_attr(), which updates dynamically allocated attributes at
runtime.  The upcoming conversion to static attributes needs a way to
determine sparse support at visibility check time.

Add a __weak pci_legacy_has_sparse() that returns false by default.  Alpha
overrides it to check has_sparse() on the bus host controller.

Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-22-kwilczynski@kernel.org

Previously, Alpha's PCI resource files (resourceN, resourceN_sparse,
resourceN_dense) were dynamically created by pci_create_resource_files(),
which overrides the generic __weak implementation.  The previous code
allocated bin_attributes at runtime and managed them via the res_attr[] and
res_attr_wc[] fields in struct pci_dev.

Convert to static const attributes with three attribute groups (plain,
sparse, dense), each with an .is_bin_visible() callback that checks
resource length, has_sparse(), and sparse_mem_mmap_fits().  A .bin_size()
callback provides the resource size to the kernfs node, with the sparse
variant shifting by 5 bits for byte-level addressing.

Register the groups via ARCH_PCI_DEV_GROUPS so the driver model handles
creation and removal automatically.

Use the new pci_resource_is_mem() helper for the type check, replacing the
open-coded bitwise flag test.

Finally, remove pci_create_resource_files(), pci_remove_resource_files(),
pci_create_attr(), and pci_create_one_attr() which are no longer needed.

Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-18-kwilczynski@kernel.org

strncpy() has no remaining callers in the kernel[1]. Remove the
alpha-specific assembly implementation and __HAVE_ARCH_STRNCPY define,
falling back to the generic version in lib/string.c.

The __stxncpy helper (stxncpy.S/ev6-stxncpy.S) is retained as it is
still used by strncat.

Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>

Pull misc vfs updates from Christian Brauner:
 "Features:

   - Reduce pipe->mutex contention by pre-allocating pages outside the
     lock in anon_pipe_write().

     anon_pipe_write() called alloc_page() once per page while holding
     pipe->mutex. The allocation can sleep doing direct reclaim and runs
     memcg charging, which extends the critical section and stalls any
     concurrent reader on the same mutex. Now up to 8 pages are
     pre-allocated before the mutex is taken, leftovers are recycled
     into the per-pipe tmp_page[] cache before unlock, and any remainder
     is released after unlock, keeping the allocator out of the critical
     section on both sides. On a writers x readers sweep with 64KB
     writes against a 1 MB pipe throughput improves 6-28% and average
     write latency drops 5-22%; under memory pressure - when the cost of
     holding the mutex across reclaim is highest - throughput improves
     21-48% and latency drops 17-33%. The microbenchmark is added to
     selftests.

   - uaccess/sockptr: fix the ignored_trailing logic in
     copy_struct_to_user() to behave as documented and the usize check
     in copy_struct_from_sockptr() for user pointers, and add
     copy_struct_{from,to}_bounce_buffer() and copy_struct_to_sockptr()
     helpers for upcoming users (IPPROTO_SMBDIRECT, IPPROTO_QUIC).

   - bpf: add a sleepable bpf_real_inode() kfunc that resolves the real
     inode backing a dentry via d_real_inode(). On overlayfs the inode
     attached to the dentry doesn't carry the underlying device
     information; this is used by the filesystem restriction BPF program
     that was merged into systemd.

   - docs: add guidelines for submitting new filesystems, motivated by
     the maintenance burden abandoned and untestable filesystems impose
     on VFS developers, blocking infrastructure work like folio
     conversions and iomap migration.

  Fixes:

   - libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
     and drop the now-redundant assignments in callers. This began as a
     one-line dma-buf fix for a path_noexec() warning; a pseudo
     filesystem has no reason not to set SB_I_NOEXEC. All init_pseudo()
     callers were audited: the only visible effect is on dma-buf where
     SB_I_NOEXEC silences the warning.

   - Handle set_blocksize() failures in legacy filesystems (bfs, hpfs,
     qnx4, jfs, befs, affs, isofs, minix, ntfs3, omfs). Mounting a
     device with a sector size > PAGE_SIZE crashed roughly half of them;
     the rest had the same missing error handling pattern. Plus a
     follow-up releasing the superblock buffer_head when setting the
     minix v3 block size fails.

   - mount: honour SB_NOUSER in the new mount API.

   - fs/fcntl: fix a SOFTIRQ-unsafe lock order in fasync signaling by
     switching the process-group paths of send_sigio() and send_sigurg()
     from read_lock(&tasklist_lock) to RCU, matching the single-PID
     path.

   - vfs: add an FS_USERNS_DELEGATABLE flag and set it for NFS, fixing
     delegated NFS mounts (fsopen() in a container with the mount
     performed by a privileged daemon) that broke when non-init
     s_user_ns was tied to FS_USERNS_MOUNT.

   - selftests/namespaces: fix a hang in nsid_test where an unreaped
     grandchild kept the TAP pipe write-end open, a waitpid(-1) race in
     listns_efault_test, and a false FAIL on kernels without listns()
     where the tests should SKIP.

   - filelock: fix the break_lease() stub signature for
     CONFIG_FILE_LOCKING=n.

   - init/initramfs_test: wait for the async initramfs unpacking before
     running; the test and do_populate_rootfs() share the parser state.

   - fs/coredump: reduce redundant log noise in
     validate_coredump_safety().

   - iomap: pass the correct length to fserror_report_io() in
     __iomap_write_begin().

   - backing-file: fix the backing_file_open() kerneldoc.

  Cleanups:

   - initramfs: refactor the cpio hex header parsing to use hex2bin()
     instead of the hand-rolled simple_strntoul() which is reverted, and
     extend the initramfs KUnit tests to cover header fields with 0x
     prefixes.

   - Replace __get_free_pages() and friends with kmalloc()/kzalloc()
     across quota, proc, ocfs2/dlm, nilfs2, nfs, nfsd, libfs, jfs, jbd2,
     isofs, fuse, select, namespace, configfs, binfmt_misc, bfs, and the
     do_mounts init code - part of the larger work of replacing page
     allocator calls with kmalloc().

   - Use clear_and_wake_up_bit() in unlock_buffer() and
     journal_end_buffer_io_sync() instead of open-coding the sequence.

   - Drop unused VFS exports: unexport drop_super_exclusive(), remove
     start_removing_user_path_at(), and fold __start_removing_path()
     into start_removing_path().

   - fs/read_write: narrow the __kernel_write() export with
     EXPORT_SYMBOL_FOR_MODULES().

   - vfs: uapi: retire octal and hex constants in favor of (1 << n) for
     the O_ flags. Finding a free bit for a new flag across the
     architectures was needlessly hard with the mixed bases.

   - dcache: add extra sanity checks of dead dentries in dentry_free()
     via a new DENTRY_WARN_ONCE() that also prints d_flags.

   - iov_iter: use kmemdup_array() in dup_iter() to harden the
     allocation against multiplication overflow.

   - fs/pipe: write to ->poll_usage only once.

   - vfs: remove an always-taken if-branch in find_next_fd().

   - dcache: use kmalloc_flex() for struct external_name in __d_alloc().

   - namei: use QSTR() instead of QSTR_INIT() in path_pts().

   - sync_file_range: delete dead S_ISLNK code.

   - Comment fixes: retire a stale comment in fget_task_next() and fix
     assorted spelling mistakes"

* tag 'vfs-7.2-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (73 commits)
  backing-file: fix backing_file_open() kerneldoc parameter
  iomap: pass the correct len to fserror_report_io in __iomap_write_begin
  vfs: add FS_USERNS_DELEGATABLE flag and set it for NFS
  filelock: fix break_lease() stub signature for CONFIG_FILE_LOCKING=n
  vfs: uapi: retire octal and hex numbers in favor of (1 << n) for O_ flags
  bpf: add bpf_real_inode() kfunc
  fs/read_write: Do not export __kernel_write() to the entire world
  libfs: drop redundant SB_I_NOEXEC/SB_I_NODEV in init_pseudo() callers
  libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
  mount: honour SB_NOUSER in the new mount API
  fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
  selftests/pipe: add pipe_bench microbenchmark
  fs/pipe: pre-allocate pages outside pipe->mutex in anon_pipe_write
  fs: retire stale comment in fget_task_next()
  fs: fix spelling mistakes in comment
  bfs: replace get_zeroed_page() with kzalloc()
  binfmt_misc: replace __get_free_page() with kmalloc()
  configfs: replace __get_free_pages() with kzalloc()
  fs/namespace: use __getname() to allocate mntpath buffer
  fs/select: replace __get_free_page() with kmalloc()
  ...

Pull openat2 updates from Christian Brauner:
 "Features:

   - Add O_EMPTYPATH to openat(2)/openat2(2). To get an operable file
     descriptor from an O_PATH file descriptor it is possible to use
     openat(fd, ".", O_DIRECTORY) for directories, but other file types
     require going through open("/proc/<pid>/fd/<nr>") and thus depend
     on a functioning procfs.

     With O_EMPTYPATH an empty path string is accepted and LOOKUP_EMPTY
     is set at path resolution time, allowing to reopen the file behind
     the file descriptor directly. Selftests are included.

   - Add an OPENAT2_REGULAR flag for openat2(2) which refuses to open
     anything but regular files with the new EFTYPE error code.

     This implements the "ability to only open regular files" feature
     requested by userspace via uapi-group.org and protects services
     from being redirected to fifos, device nodes, and friends.

     All atomic_open implementations were audited for OPENAT2_REGULAR
     handling. Explicit checks were added to ceph, gfs2, nfs (v4), and
     cifs/smb - these are the filesystems whose atomic_open can
     encounter an existing non-regular file and would otherwise call
     finish_open() on it or return a misleading error code.

     The remaining implementations (9p, fuse, vboxsf, nfs v2/v3) only
     call finish_open() on freshly created files and use
     finish_no_open() for lookup hits, letting the VFS catch non-regular
     files via the do_open() safety net.

  Cleanups:

   - Migrate the openat2 selftests to the kselftest harness and move
     them under selftests/filesystems/. The tests were written in the
     early days of selftests' TAP support and the modern kselftest
     harness is much easier to follow and maintain. The contents of the
     tests are unchanged and the new emptypath tests are ported on top.

   - Make the LAST_XXX last-type constants private to fs/namei.c. The
     only user outside of fs/namei.c was ksmbd which only needs to know
     whether the last component is a regular one, so
     vfs_path_parent_lookup() now performs the LAST_NORM check
     internally. The ints are replaced with a dedicated enum last_type"

* tag 'vfs-7.2-rc1.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  vfs: replace ints with enum last_type for LAST_XXX
  vfs: make LAST_XXX private to fs/namei.c
  selftests: openat2: port emptypath_test to kselftest harness
  kselftest/openat2: test for OPENAT2_REGULAR flag
  openat2: new OPENAT2_REGULAR flag support
  openat2: introduce EFTYPE error code
  selftest: add tests for O_EMPTYPATH
  vfs: add O_EMPTYPATH to openat(2)/openat2(2)
  selftests: openat2: migrate to kselftest harness
  selftests: openat2: switch from custom ARRAY_LEN to ARRAY_SIZE
  selftests: openat2: move helpers to header
  selftests: move openat2 tests to selftests/filesystems/

A recent build failure[1] exposed the diffculty of working with the
current octal and hex definitions of O_ flags when trying to find a gap
for a new flag. This difficulty is compounded by the fact that O_ flags
may have architectural specific values.

Replace the hex/octal #defines, which are hard to parse when looking for
free bits, with explicit bit shifts like (1 << 11). Also, add comments
that identify which architectures redefine some of the seemingly free
("cursed") bits in uapi/asm-generic/fcntl.h. These should not be used to
define new O_ flags (for now, at least).

The translastion was done with Claude Opus 4.8, and verified with a
(non-AI) gawk script. The accounting of which architectures claim
which bit-gaps in uapi/asm-generic/fcntl.h is also done by hand.

[1]: https://lore.kernel.org/all/agruPPybCx8q2XcJ@sirena.org.uk/

Assisted-by: Claude:Opus 4.8
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260604222405.5382-1-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>

On real hardware, panic and machine reboot may not flush hardware cache
to memory. This means the persistent ring buffer, which relies on a
coherent state of memory, may not have its events written to the buffer
and they may be lost. Moreover, there may be inconsistency with the
counters which are used for validation of the integrity of the
persistent ring buffer which may cause all data to be discarded.

To avoid this issue, stop recording of the ring buffer on panic and
flush the cache of the ring buffer's memory.

Fixes: e645535a954a ("tracing: Add option to use memmapped memory for trace boot instance")
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://patch.msgid.link/177751969602.2136606.12031934362587643488.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Introduce a new error code EFTYPE for wrong file type operations.
EFTYPE is already used in BSD systems like FreeBSD and macOS.

This will be used by the upcoming OPENAT2_REGULAR flag support to
return a specific error when a path doesn't refer to a regular file.

Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Link: https://patch.msgid.link/20260328172314.45807-2-dorjoychy111@gmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Aleksa Sarai <aleksa@amutable.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>