Pull ARM SoC fixes from Olof Johansson: "We haven't seen a whole lot of fixes for the first two weeks since the merge window, but here is the batch that we have at the moment. Nothing sticks out as particularly bad or scary, it's mostly a handful of smaller fixes to several platforms. The Uniphier reset controller changes could probably have been delayed to 4.10, but they're not scary and just plumbing up driver changes that went in during the merge window. We're also adding another maintainer to Marvell Berlin platforms, to help out when Sebastian is too busy. Yay teamwork!" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031 ARM: dts: vf610: fix IRQ flag of global timer ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path ARM: imx: gpc: Initialize all power domains arm64: dts: Updated NAND DT properties for NS2 SVK arm64: dts: uniphier: change MIO node to SD control node ARM: dts: uniphier: change MIO node to SD control node reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER arm64: dts: Add timer erratum property for LS2080A and LS1043A arm64: dts: rockchip: remove the abuse of keep-power-in-suspend ARM: multi_v7_defconfig: Enable Intel e1000e driver MAINTAINERS: add myself as Marvell berlin SoC maintainer bus: qcom-ebi2: depend on ARCH_QCOM or COMPILE_TEST ARM: dts: fix the SD card on the Snowball arm64: dts: rockchip: remove always-on and boot-on from vcc_sd arm64: dts: marvell: fix clocksource for CP110 master SPI0 ARM: mvebu: Select corediv clk for all mvebu v7 SoC
Pull tty/serial driver fixes from Greg KH: "Here are a number of small tty and serial driver fixes for reported issues for 4.9-rc3. Nothing major, but they do resolve a bunch of problems with the tty core changes that are in 4.9-rc1, and finally the atmel serial driver is back working properly. All have been in linux-next with no reported issues" * tag 'tty-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial_core: fix NULL struct tty pointer access in uart_write_wakeup tty: serial_core: Fix serial console crash on port shutdown tty/serial: at91: fix hardware handshake on Atmel platforms vt: clear selection before resizing sc16is7xx: always write state when configuring GPIO as an output sh-sci: document R8A7743/5 support tty: serial: 8250: 8250_core: NXP SC16C2552 workaround tty: limit terminal size to 4M chars tty: serial: fsl_lpuart: Fix Tx DMA edge case serial: 8250_lpss: enable MSI for sure serial: core: fix console problems on uart_close serial: 8250_uniphier: fix clearing divisor latch access bit serial: 8250_uniphier: fix more unterminated string serial: pch_uart: add terminate entry for dmi_system_id tables devicetree: bindings: uart: Add new compatible string for ZynqMP serial: xuartps: Add new compatible string for ZynqMP serial: SERIAL_STM32 should depend on HAS_DMA serial: stm32: Fix comparisons with undefined register tty: vt, fix bogus division in csi_J
Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 4.9-rc3. There is the usual number of gadget and xhci patches in here to resolved reported issues, as well as some usb-serial driver fixes and new device ids. All have been in linux-next with no reported issues" * tag 'usb-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) usb: chipidea: host: fix NULL ptr dereference during shutdown usb: renesas_usbhs: add wait after initialization for R-Car Gen3 usb: increase ohci watchdog delay to 275 msec usb: musb: Call pm_runtime from musb_gadget_queue usb: musb: Fix hardirq-safe hardirq-unsafe lock order error usb: ehci-platform: increase EHCI_MAX_RSTS to 4 usb: ohci-at91: Set RemoteWakeupConnected bit explicitly. USB: serial: fix potential NULL-dereference at probe xhci: use default USB_RESUME_TIMEOUT when resuming ports. xhci: workaround for hosts missing CAS bit xhci: add restart quirk for Intel Wildcatpoint PCH USB: serial: cp210x: fix tiocmget error handling wusb: fix error return code in wusb_prf() Revert "Documentation: devicetree: dwc2: Deprecate g-tx-fifo-size" Revert "usb: dwc2: gadget: fix TX FIFO size and address initialization" Revert "usb: dwc2: gadget: change variable name to more meaningful" USB: serial: ftdi_sio: add support for Infineon TriBoard TC2X7 wusb: Stop using the stack for sg crypto scratch space usb: dwc3: Fix size used in dma_free_coherent() usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable ...
Pull device mapper fixes from Mike Snitzer: - a couple DM raid and DM mirror fixes - a couple .request_fn request-based DM NULL pointer fixes - a fix for a DM target reference count leak, on target load error, that prevented associated DM target kernel module(s) from being removed * tag 'dm-4.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm table: fix missing dm_put_target_type() in dm_table_add_target() dm rq: clear kworker_task if kthread_run() returned an error dm: free io_barrier after blk_cleanup_queue call dm raid: fix activation of existing raid4/10 devices dm mirror: use all available legs on multiple failures dm mirror: fix read error on recovery after default leg failure dm raid: fix compat_features validation
Renesas RZ/G SoC also have the SCIF, SCIFA, SCIFB, and HSCIF ports and they seem compatible with the R-Car gen2 SoC in this respect... Document RZ/G1[ME] (also known as R8A774[35]) SoC bindings. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch Adds the new compatible string for ZynqMP SoC. Signed-off-by: Nava kishore Manne <navam@xilinx.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull clk fixes from Stephen Boyd: "This is the first batch of clk driver fixes for this release. We have a handful of fixes for the uniphier clk driver that was introduced recently, as well as Kconfig option hiding, module autoloading markings, and a few fixes for clk_hw based registration patches that went in this merge window" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: at91: Fix a return value in case of error clk: uniphier: rename MIO clock to SD clock for Pro5, PXs2, LD20 SoCs clk: uniphier: fix memory overrun bug clk: hi6220: use CLK_OF_DECLARE_DRIVER for sysctrl and mediactrl clock init clk: mvebu: armada-37xx-periph: Fix the clock gate flag clk: bcm2835: Clamp the PLL's requested rate to the hardware limits. clk: max77686: fix number of clocks setup for clk_hw based registration clk: mvebu: armada-37xx-periph: Fix the clock provider registration clk: core: add __init decoration for CLK_OF_DECLARE_DRIVER function clk: mediatek: Add hardware dependency clk: samsung: clk-exynos-audss: Fix module autoload clk: uniphier: fix type of variable passed to regmap_read() clk: uniphier: add system clock support for sLD3 SoC
Pull GPIO fixes from Linus Walleij:
"Here is a set of GPIO fixes for the v4.9 kernel series:
- Fix up off-by one and line offset validation, info leak to
userspace, and reject invalid flags. Those are especially valuable
hardening patches from Lars-Peter Clausen, all tagged for stable.
- Fix module autoload for TS4800 and ATH79.
- Correct the IRQ handler for MPC8xxx to use handle_level_irq() as it
(a) reacts to edges not levels and (b) even implements .irq_ack().
We were missing IRQs here.
- Fix the error path for acpi_dev_gpio_irq_get()
- Fix a memory leak in the MXS driver.
- Fix an annoying typo in the STMPE driver.
- Put a dependency on sysfs to the mockup driver"
* tag 'gpio-v4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mpc8xxx: Correct irq handler function
gpio: ath79: Fix module autoload
gpio: ts4800: Fix module autoload
gpio: GPIO_GET_LINEEVENT_IOCTL: Reject invalid line and event flags
gpio: GPIO_GET_LINEHANDLE_IOCTL: Reject invalid line flags
gpio: GPIOHANDLE_GET_LINE_VALUES_IOCTL: Fix information leak
gpio: GPIO_GET_LINEEVENT_IOCTL: Validate line offset
gpio: GPIOHANDLE_GET_LINE_VALUES_IOCTL: Fix information leak
gpio: GPIO_GET_LINEHANDLE_IOCTL: Validate line offset
gpio: GPIO_GET_CHIPINFO_IOCTL: Fix information leak
gpio: GPIO_GET_CHIPINFO_IOCTL: Fix line offset validation
gpio / ACPI: fix returned error from acpi_dev_gpio_irq_get()
gpio: mockup: add sysfs dependency
gpio: stmpe: || vs && typo
gpio: mxs: Unmap region obtained by of_iomap
gpio/board.txt: point to gpiod_set_value
Pull IPMI updates from Corey Minyard: "A small bug fix and a new driver for acting as an IPMI device. I was on vacation during the merge window (a long vacation) but this is a bug fix that should go in and a new driver that shouldn't hurt anything. This has been in linux-next for a month or so" * tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: fix crash on reading version from proc after unregisted bmc ipmi/bt-bmc: remove redundant return value check of platform_get_resource() ipmi/bt-bmc: add a dependency on ARCH_ASPEED ipmi: Fix ioremap error handling in bt-bmc ipmi: add an Aspeed BT IPMI BMC driver
Pull timer updates from Thomas Gleixner:
"This updates contains:
- A revert which addresses a boot failure on ARM Sun5i platforms
- A new clocksource driver, which has been delayed beyond rc1 due to
an interrupt driver issue which was unearthed by this driver. The
debugging of that issue and the discussion about the proper
solution made this driver miss the merge window. There is no point
in delaying it for a full cycle as it completes the basic mainline
support for the new JCore platform and does not create any risk
outside of that platform"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init"
clocksource: Add J-Core timer/clocksource driver
of: Add J-Core timer bindings