Add support for saving OFW's cif, and later calling into it to run OFW commands. OFW remains resident in memory, living within virtual range 0xff800000 - 0xffc00000. A single page directory entry points to the pgdir that OFW actually uses, so rather than saving the entire page table, we grab and install that one entry permanently in the kernel's page table. This is currently only used by the OLPC XO. Note that this particular calling convention breaks PAE and PAT, and so cannot be used on newer x86 hardware. Signed-off-by: Andres Salomon <dilinger@queued.net> LKML-Reference: <20100618174653.7755a39a@dev.queued.net> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Now that numa=fake=<size>[MG] is implemented, it is possible to remove configurable node size support. The command-line parsing was already broken (numa=fake=*128, for example, would not work) and since fake nodes are now interleaved over physical nodes, this support is no longer required. Signed-off-by: David Rientjes <rientjes@google.com> LKML-Reference: <alpine.DEB.2.00.1002151343080.26927@chino.kir.corp.google.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
numa=fake=N specifies the number of fake nodes, N, to partition the system into and then allocates them by interleaving over physical nodes. This requires knowledge of the system capacity when attempting to allocate nodes of a certain size: either very large nodes to benchmark scalability of code that operates on individual nodes, or very small nodes to find bugs in the VM. This patch introduces numa=fake=<size>[MG] so it is possible to specify the size of each node to allocate. When used, nodes of the size specified will be allocated and interleaved over the set of physical nodes. FAKE_NODE_MIN_SIZE was also moved to the more-appropriate include/asm/numa_64.h. Signed-off-by: David Rientjes <rientjes@google.com> LKML-Reference: <alpine.DEB.2.00.1002151342510.26927@chino.kir.corp.google.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Add missing information about requirements of using the EHCI usb debug controller as well as to mention you can use a debug controller other than the first one in the system. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@intel.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits) x86: Move get/set_wallclock to x86_platform_ops x86: platform: Fix section annotations x86: apic namespace cleanup x86: Distangle ioapic and i8259 x86: Add Moorestown early detection x86: Add hardware_subarch ID for Moorestown x86: Add early platform detection x86: Move tsc_init to late_time_init x86: Move tsc_calibration to x86_init_ops x86: Replace the now identical time_32/64.c by time.c x86: time_32/64.c unify profile_pc x86: Move calibrate_cpu to tsc.c x86: Make timer setup and global variables the same in time_32/64.c x86: Remove mca bus ifdef from timer interrupt x86: Simplify timer_ack magic in time_32.c x86: Prepare unification of time_32/64.c x86: Remove do_timer hook x86: Add timer_init to x86_init_ops x86: Move percpu clockevents setup to x86_init_ops x86: Move xen_post_allocator_init into xen_pagetable_setup_done ... Fix up conflicts in arch/x86/include/asm/io_apic.h
x86 bootprotocol 2.07 has introduced hardware_subarch ID in the boot parameters provided by FW. We use it to identify Moorestown platforms. [ tglx: Cleanup and paravirt fix ] Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds kernel configuration and boot support for Intel Trusted Execution Technology (Intel TXT). Intel's technology for safer computing, Intel Trusted Execution Technology (Intel TXT), defines platform-level enhancements that provide the building blocks for creating trusted platforms. Intel TXT was formerly known by the code name LaGrande Technology (LT). Intel TXT in Brief: o Provides dynamic root of trust for measurement (DRTM) o Data protection in case of improper shutdown o Measurement and verification of launched environment Intel TXT is part of the vPro(TM) brand and is also available some non-vPro systems. It is currently available on desktop systems based on the Q35, X38, Q45, and Q43 Express chipsets (e.g. Dell Optiplex 755, HP dc7800, etc.) and mobile systems based on the GM45, PM45, and GS45 Express chipsets. For more information, see http://www.intel.com/technology/security/. This site also has a link to the Intel TXT MLE Developers Manual, which has been updated for the new released platforms. A much more complete description of how these patches support TXT, how to configure a system for it, etc. is in the Documentation/intel_txt.txt file in this patch. This patch provides the TXT support routines for complete functionality, documentation for TXT support and for the changes to the boot_params structure, and boot detection of a TXT launch. Attempts to shutdown (reboot, Sx) the system will result in platform resets; subsequent patches will support these shutdown modes properly. Documentation/intel_txt.txt | 210 +++++++++++++++++++++ Documentation/x86/zero-page.txt | 1 arch/x86/include/asm/bootparam.h | 3 arch/x86/include/asm/fixmap.h | 3 arch/x86/include/asm/tboot.h | 197 ++++++++++++++++++++ arch/x86/kernel/Makefile | 1 arch/x86/kernel/setup.c | 4 arch/x86/kernel/tboot.c | 379 +++++++++++++++++++++++++++++++++++++++ security/Kconfig | 30 +++ 9 files changed, 827 insertions(+), 1 deletion(-) Signed-off-by: Joseph Cihula <joseph.cihula@intel.com> Signed-off-by: Shane Wang <shane.wang@intel.com> Signed-off-by: Gang Wei <gang.wei@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
exception.txt only explains the code on x86, so it's better to move it into Documentation/x86 directory. And also rename it to exception-tables.txt which looks much more reasonable. This patch is on top of the previous one. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Conflicts: arch/x86/kernel/cpu/mcheck/mce_64.c arch/x86/kernel/irq.c Merge reason: Resolve the conflicts above. Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch introduces three boot options (no_cmci, dont_log_ce and ignore_ce) to control handling for corrected errors. The "mce=no_cmci" boot option disables the CMCI feature. Since CMCI is a new feature so having boot controls to disable it will be a help if the hardware is misbehaving. The "mce=dont_log_ce" boot option disables logging for corrected errors. All reported corrected errors will be cleared silently. This option will be useful if you never care about corrected errors. The "mce=ignore_ce" boot option disables features for corrected errors, i.e. polling timer and cmci. All corrected events are not cleared and kept in bank MSRs. Usually this disablement is not recommended, however it will be a help if there are some conflict with the BIOS or hardware monitoring applications etc., that clears corrected events in banks instead of OS. [ And trivial cleanup (space -> tab) for doc is included. ] Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> LKML-Reference: <4A30ACDF.5030408@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>