I'm not sure what I was trying to do with the ':'s, but they're just rendered to HTML which looks odd. This makes "fence.i" look like "mvendorid" and such, which is seems reasonable to me. Reviewed-by: Evan Green <evan@rivosinc.com> Link: https://lore.kernel.org/r/20230710193329.2742-1-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We've had a ton of issues around the ISA string parsing rules elsewhere in RISC-V, so let's at least be clear about what the rules are so we can try and avoid more issues. Link: https://lore.kernel.org/r/CAK9=C2Vy-4V9kgnga98tiC3TeHkR2LFPakyBbS8s_h3_Z=ieyQ@mail.gmail.com/ Link: https://lore.kernel.org/r/20230629031705.15575-1-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This is included in the ISA manual, but it's pretty common for bits of the ISA manual that are actually ABI to change. So let's document it explicitly. Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230619190142.26498-1-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull RISC-V updates from Palmer Dabbelt: - Support for ACPI - Various cleanups to the ISA string parsing, including making them case-insensitive - Support for the vector extension - Support for independent irq/softirq stacks - Our CPU DT binding now has "unevaluatedProperties: false" * tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits) riscv: hibernate: remove WARN_ON in save_processor_state dt-bindings: riscv: cpus: switch to unevaluatedProperties: false dt-bindings: riscv: cpus: add a ref the common cpu schema riscv: stack: Add config of thread stack size riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK RISC-V: always report presence of extensions formerly part of the base ISA dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support RISC-V: remove decrement/increment dance in ISA string parser RISC-V: rework comments in ISA string parser RISC-V: validate riscv,isa at boot, not during ISA string parsing RISC-V: split early & late of_node to hartid mapping RISC-V: simplify register width check in ISA string parsing perf: RISC-V: Limit the number of counters returned from SBI riscv: replace deprecated scall with ecall riscv: uprobes: Restore thread.bad_cause riscv: mm: try VMA lock-based page fault handling first riscv: mm: Pre-allocate PGD entries for vmalloc/modules area RISC-V: hwprobe: Expose Zba, Zbb, and Zbs RISC-V: Track ISA extensions per hart ...
Evan Green <evan@rivosinc.com> says: This change detects the presence of Zba, Zbb, and Zbs extensions and exports them per-hart to userspace via the hwprobe mechanism. Glibc can then use these in setting up hwcaps-based library search paths. There's a little bit of extra housekeeping here: the first change adds Zba and Zbs to the set of extensions the kernel recognizes, and the second change starts tracking ISA features per-hart (in addition to the ANDed mask of features across all harts which the kernel uses to make decisions). Now that we track the ISA information per-hart, we could even fix up /proc/cpuinfo to accurately report extension per-hart, though I've left that out of this series for now. * b4-shazam-merge: RISC-V: hwprobe: Expose Zba, Zbb, and Zbs RISC-V: Track ISA extensions per hart RISC-V: Add Zba, Zbs extension probing Link: https://lore.kernel.org/r/20230509182504.2997252-1-evan@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add two new bits to the IMA_EXT_0 key for ZBA, ZBB, and ZBS extensions. These are accurately reported per CPU. Signed-off-by: Evan Green <evan@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Link: https://lore.kernel.org/r/20230509182504.2997252-4-evan@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Palmer suggested at some point, not sure if it was in one of the weekly linux-riscv syncs, or a conversation at FOSDEM, that we should document the role of the automation running on our patchwork instance plays in patch acceptance. Add a short note to the patch-acceptance document to that end. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230606-rehab-monsoon-12c17bbe08e3@wendy Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch add a brief documentation of the userspace interface in regard to the RISC-V Vector extension. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Vincent Chen <vincent.chen@sifive.com> Co-developed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20230605110724.21391-26-andy.chiu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Probing kernel support for Vector extension is available now. This only add detection for V only. Extenions like Zvfh, Zk are not in this scope. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Evan Green <evan@rivosinc.com> Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230605110724.21391-4-andy.chiu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull RISC-V updates from Palmer Dabbelt: - Support for runtime detection of the Svnapot extension - Support for Zicboz when clearing pages - We've moved to GENERIC_ENTRY - Support for !MMU on rv32 systems - The linear region is now mapped via huge pages - Support for building relocatable kernels - Support for the hwprobe interface - Various fixes and cleanups throughout the tree * tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (57 commits) RISC-V: hwprobe: Explicity check for -1 in vdso init RISC-V: hwprobe: There can only be one first riscv: Allow to downgrade paging mode from the command line dt-bindings: riscv: add sv57 mmu-type RISC-V: hwprobe: Remove __init on probe_vendor_features() riscv: Use --emit-relocs in order to move .rela.dyn in init riscv: Check relocations at compile time powerpc: Move script to check relocations at compile time in scripts/ riscv: Introduce CONFIG_RELOCATABLE riscv: Move .rela.dyn outside of init to avoid empty relocations riscv: Prepare EFI header for relocatable kernels riscv: Unconditionnally select KASAN_VMALLOC if KASAN riscv: Fix ptdump when KASAN is enabled riscv: Fix EFI stub usage of KASAN instrumented strcmp function riscv: Move DTB_EARLY_BASE_VA to the kernel address space riscv: Rework kasan population functions riscv: Split early and final KASAN population functions riscv: Use PUD/P4D/PGD pages for the linear mapping riscv: Move the linear mapping creation in its own function riscv: Get rid of riscv_pfn_base variable ...