linux.git/Documentation/power, branch v4.19 Linux kernel source tree PM / reboot: Eliminate race between reboot and suspend 2018-08-06T10:35:20+00:00 Pingfan Liu kernelfans@gmail.com 2018-07-31T08:51:32+00:00 55f2503c3b69328735e88031ff8d6ba291bd952b At present, "systemctl suspend" and "shutdown" can run in parrallel. A system can suspend after devices_shutdown(), and resume. Then the shutdown task goes on to power off. This causes many devices are not really shut off. Hence replacing reboot_mutex with system_transition_mutex (renamed from pm_mutex) to achieve the exclusion. The renaming of pm_mutex as system_transition_mutex can be better to reflect the purpose of the mutex. Signed-off-by: Pingfan Liu <kernelfans@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
At present, "systemctl suspend" and "shutdown" can run in parrallel. A
system can suspend after devices_shutdown(), and resume. Then the shutdown
task goes on to power off. This causes many devices are not really shut
off. Hence replacing reboot_mutex with system_transition_mutex (renamed
from pm_mutex) to achieve the exclusion. The renaming of pm_mutex as
system_transition_mutex can be better to reflect the purpose of the mutex.

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
firmware: Fix firmware documentation for recent file renames 2018-04-23T11:03:26+00:00 Hans de Goede hdegoede@redhat.com 2018-04-08T16:06:21+00:00 df9267f1fb6b56fa573cc93c611009b0bd126878 firmware_class.c was split into several files under drivers/base/firmware_loader. The new main.c has the functions which /request_firmware.rst references. Acked-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
firmware_class.c was split into several files under
drivers/base/firmware_loader. The new main.c has the functions which
/request_firmware.rst references.

Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM / hibernate: Make passing hibernate offsets more friendly 2018-03-30T10:01:20+00:00 Mario Limonciello mario.limonciello@dell.com 2018-03-28T17:01:09+00:00 355064675f1c997cea017ea64c8f2c216e5425d9 Currently the only way to specify a hibernate offset for a swap file is on the kernel command line. Add a new /sys/power/resume_offset that lets userspace specify the offset and disk to use when initiating a hibernate cycle. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
Currently the only way to specify a hibernate offset for a
swap file is on the kernel command line.

Add a new /sys/power/resume_offset that lets userspace
specify the offset and disk to use when initiating a hibernate
cycle.

Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge tag 'regulator-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator 2018-01-29T19:32:44+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-01-29T19:32:44+00:00 dc38787a5836f272a8c5e018b30a7aa6b273da78 Pull regulator updates from Mark Brown: "This is a quiet release in terms of code volume but a fairly big one in terms of framework changes - we've got one long awaited feature in the form of runtime configuration of suspend and the start of coupled regulator support too: - Support for modifying the voltage and enable configuration devices will have in suspend, contributed by Chunyan Zhang. - Support for the Spreadtrum SC2731, contributed by Erick Chen. - The start of changes to support coupled regulators from Maciej Purski, the rest of the series should arrive for v4.17" * tag 'regulator-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix build error regulator: core: Refactor regulator_list_voltage() regulator: core: Move of_find_regulator_by_node() to of_regulator.c regulator: add PM suspend and resume hooks regulator: empty the old suspend functions regulator: leave one item to record whether regulator is enabled regulator: make regulator voltage be an array to support more states regulator: added support for suspend states regulator: qcom_spmi: Use regmap helpers for enable/disable/is_enabled callback regulator: sc2731: Fix defines for SC2731_WR_UNLOCK and SC2731_PWR_WR_PROT_VALUE regulator: fix incorrect indentation of two assignment statements regulator: sc2731: Add regulator driver to support Spreadtrum SC2731 PMIC regulator: Add Spreadtrum SC2731 regulator documentation regulator: Update code examples in documentation MAINTAINERS: regulator: Add Documentation/power/regulator/ regulator: tps65218: Add NULL test for devm_kzalloc call regulator: tps65218: Remove unused enum tps65218_regulators 
Pull regulator updates from Mark Brown:
 "This is a quiet release in terms of code volume but a fairly big one
  in terms of framework changes - we've got one long awaited feature in
  the form of runtime configuration of suspend and the start of coupled
  regulator support too:

   - Support for modifying the voltage and enable configuration devices
     will have in suspend, contributed by Chunyan Zhang.

   - Support for the Spreadtrum SC2731, contributed by Erick Chen.

   - The start of changes to support coupled regulators from Maciej
     Purski, the rest of the series should arrive for v4.17"

* tag 'regulator-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Fix build error
  regulator: core: Refactor regulator_list_voltage()
  regulator: core: Move of_find_regulator_by_node() to of_regulator.c
  regulator: add PM suspend and resume hooks
  regulator: empty the old suspend functions
  regulator: leave one item to record whether regulator is enabled
  regulator: make regulator voltage be an array to support more states
  regulator: added support for suspend states
  regulator: qcom_spmi: Use regmap helpers for enable/disable/is_enabled callback
  regulator: sc2731: Fix defines for SC2731_WR_UNLOCK and SC2731_PWR_WR_PROT_VALUE
  regulator: fix incorrect indentation of two assignment statements
  regulator: sc2731: Add regulator driver to support Spreadtrum SC2731 PMIC
  regulator: Add Spreadtrum SC2731 regulator documentation
  regulator: Update code examples in documentation
  MAINTAINERS: regulator: Add Documentation/power/regulator/
  regulator: tps65218: Add NULL test for devm_kzalloc call
  regulator: tps65218: Remove unused enum tps65218_regulators
regulator: Update code examples in documentation 2017-11-29T10:41:16+00:00 Jonathan Neuschäfer j.neuschaefer@gmx.net 2017-11-19T05:09:07+00:00 983ba99a8f275aae9614a30469d0f480550fbc24 This involves using the REGULATOR_SUPPLY initializer macro and reindenting some of the code. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Mark Brown <broonie@kernel.org> 
This involves using the REGULATOR_SUPPLY initializer macro and
reindenting some of the code.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
PCI / PM: Support for LEAVE_SUSPENDED driver flag 2017-11-27T00:20:59+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2017-11-18T14:33:52+00:00 bd755d770ac78e8eeda05877ba66cc66f151e10e Add support for DPM_FLAG_LEAVE_SUSPENDED to the PCI bus type by making it (a) set the power.may_skip_resume status bit for devices that, from its perspective, may be left in suspend after system wakeup from sleep and (b) return early from pci_pm_resume_noirq() for devices whose remaining resume callbacks during the transition under way are going to be skipped by the PM core. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> 
Add support for DPM_FLAG_LEAVE_SUSPENDED to the PCI bus type by
making it (a) set the power.may_skip_resume status bit for devices
that, from its perspective, may be left in suspend after system
wakeup from sleep and (b) return early from pci_pm_resume_noirq()
for devices whose remaining resume callbacks during the transition
under way are going to be skipped by the PM core.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
PM / runtime: Drop children check from __pm_runtime_set_status() 2017-11-16T21:51:22+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2017-11-16T21:51:22+00:00 f8817f61e8215b0ff1b73a0d33fa04ef9e6bce8b The check for "active" children in __pm_runtime_set_status(), when trying to set the parent device status to "suspended", doesn't really make sense, because in fact it is not invalid to set the status of a device with runtime PM disabled to "suspended" in any case. It is invalid to enable runtime PM for a device with its status set to "suspended" while its child_count reference counter is nonzero, but the check in __pm_runtime_set_status() doesn't really cover that situation. For this reason, drop the children check from __pm_runtime_set_status() and add a check against child_count reference counters of "suspended" devices to pm_runtime_enable(). Fixes: a8636c89648a (PM / Runtime: Don't allow to suspend a device with an active child) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Johan Hovold <johan@kernel.org> 
The check for "active" children in __pm_runtime_set_status(), when
trying to set the parent device status to "suspended", doesn't
really make sense, because in fact it is not invalid to set the
status of a device with runtime PM disabled to "suspended" in any
case.  It is invalid to enable runtime PM for a device with its
status set to "suspended" while its child_count reference counter
is nonzero, but the check in __pm_runtime_set_status() doesn't
really cover that situation.

For this reason, drop the children check from __pm_runtime_set_status()
and add a check against child_count reference counters of "suspended"
devices to pm_runtime_enable().

Fixes: a8636c89648a (PM / Runtime: Don't allow to suspend a device with an active child)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Merge tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2017-11-14T03:43:50+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-11-14T03:43:50+00:00 bd2cd7d5a8f83ddc761025f42a3ca8e56351a6cc Pull power management updates from Rafael Wysocki: "There are no real big ticket items here this time. The most noticeable change is probably the relocation of the OPP (Operating Performance Points) framework to its own directory under drivers/ as it has grown big enough for that. Also Viresh is now going to maintain it and send pull requests for it to me, so you will see this change in the git history going forward (but still not right now). Another noticeable set of changes is the modifications of the PM core, the PCI subsystem and the ACPI PM domain to allow of more integration between system-wide suspend/resume and runtime PM. For now it's just a way to avoid resuming devices from runtime suspend unnecessarily during system suspend (if the driver sets a flag to indicate its readiness for that) and in the works is an analogous mechanism to allow devices to stay suspended after system resume. In addition to that, we have some changes related to supporting frequency-invariant CPU utilization metrics in the scheduler and in the schedutil cpufreq governor on ARM and changes to add support for device performance states to the generic power domains (genpd) framework. The rest is mostly fixes and cleanups of various sorts. Specifics: - Relocate the OPP (Operating Performance Points) framework to its own directory under drivers/ and add support for power domain performance states to it (Viresh Kumar). - Modify the PM core, the PCI bus type and the ACPI PM domain to support power management driver flags allowing device drivers to specify their capabilities and preferences regarding the handling of devices with enabled runtime PM during system suspend/resume and clean up that code somewhat (Rafael Wysocki, Ulf Hansson). - Add frequency-invariant accounting support to the task scheduler on ARM and ARM64 (Dietmar Eggemann). - Fix PM QoS device resume latency framework to prevent "no restriction" requests from overriding requests with specific requirements and drop the confusing PM_QOS_FLAG_REMOTE_WAKEUP device PM QoS flag (Rafael Wysocki). - Drop legacy class suspend/resume operations from the PM core and drop legacy bus type suspend and resume callbacks from ARM/locomo (Rafael Wysocki). - Add min/max frequency support to devfreq and clean it up somewhat (Chanwoo Choi). - Rework wakeup support in the generic power domains (genpd) framework and update some of its users accordingly (Geert Uytterhoeven). - Convert timers in the PM core to use timer_setup() (Kees Cook). - Add support for exposing the SLP_S0 (Low Power S0 Idle) residency counter based on the LPIT ACPI table on Intel platforms (Srinivas Pandruvada). - Add per-CPU PM QoS resume latency support to the ladder cpuidle governor (Ramesh Thomas). - Fix a deadlock between the wakeup notify handler and the notifier removal in the ACPI core (Ville Syrjälä). - Fix a cpufreq schedutil governor issue causing it to use stale cached frequency values sometimes (Viresh Kumar). - Fix an issue in the system suspend core support code causing wakeup events detection to fail in some cases (Rajat Jain). - Fix the generic power domains (genpd) framework to prevent the PM core from using the direct-complete optimization with it as that is guaranteed to fail (Ulf Hansson). - Fix a minor issue in the cpuidle core and clean it up a bit (Gaurav Jindal, Nicholas Piggin). - Fix and clean up the intel_idle and ARM cpuidle drivers (Jason Baron, Len Brown, Leo Yan). - Fix a couple of minor issues in the OPP framework and clean it up (Arvind Yadav, Fabio Estevam, Sudeep Holla, Tobias Jordan). - Fix and clean up some cpufreq drivers and fix a minor issue in the cpufreq statistics code (Arvind Yadav, Bhumika Goyal, Fabio Estevam, Gautham Shenoy, Gustavo Silva, Marek Szyprowski, Masahiro Yamada, Robert Jarzmik, Zumeng Chen). - Fix minor issues in the system suspend and hibernation core, in power management documentation and in the AVS (Adaptive Voltage Scaling) framework (Helge Deller, Himanshu Jha, Joe Perches, Rafael Wysocki). - Fix some issues in the cpupower utility and document that Shuah Khan is going to maintain it going forward (Prarit Bhargava, Shuah Khan)" * tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (88 commits) tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore tools/power/cpupower: Add 64 bit library detection intel_idle: Graceful probe failure when MWAIT is disabled cpufreq: schedutil: Reset cached_raw_freq when not in sync with next_freq freezer: Fix typo in freezable_schedule_timeout() comment PM / s2idle: Clear the events_check_enabled flag cpufreq: stats: Handle the case when trans_table goes beyond PAGE_SIZE cpufreq: arm_big_little: make cpufreq_arm_bL_ops structures const cpufreq: arm_big_little: make function arguments and structure pointer const cpuidle: Avoid assignment in if () argument cpuidle: Clean up cpuidle_enable_device() error handling a bit ACPI / PM: Fix acpi_pm_notifier_lock vs flush_workqueue() deadlock PM / Domains: Fix genpd to deal with drivers returning 1 from ->prepare() cpuidle: ladder: Add per CPU PM QoS resume latency support PM / QoS: Fix device resume latency framework PM / domains: Rework governor code to be more consistent PM / Domains: Remove gpd_dev_ops.active_wakeup() callback soc: rockchip: power-domain: Use GENPD_FLAG_ACTIVE_WAKEUP soc: mediatek: Use GENPD_FLAG_ACTIVE_WAKEUP ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ACTIVE_WAKEUP ... 
Pull power management updates from Rafael Wysocki:
 "There are no real big ticket items here this time.

  The most noticeable change is probably the relocation of the OPP
  (Operating Performance Points) framework to its own directory under
  drivers/ as it has grown big enough for that. Also Viresh is now going
  to maintain it and send pull requests for it to me, so you will see
  this change in the git history going forward (but still not right
  now).

  Another noticeable set of changes is the modifications of the PM core,
  the PCI subsystem and the ACPI PM domain to allow of more integration
  between system-wide suspend/resume and runtime PM. For now it's just a
  way to avoid resuming devices from runtime suspend unnecessarily
  during system suspend (if the driver sets a flag to indicate its
  readiness for that) and in the works is an analogous mechanism to
  allow devices to stay suspended after system resume.

  In addition to that, we have some changes related to supporting
  frequency-invariant CPU utilization metrics in the scheduler and in
  the schedutil cpufreq governor on ARM and changes to add support for
  device performance states to the generic power domains (genpd)
  framework.

  The rest is mostly fixes and cleanups of various sorts.

  Specifics:

   - Relocate the OPP (Operating Performance Points) framework to its
     own directory under drivers/ and add support for power domain
     performance states to it (Viresh Kumar).

   - Modify the PM core, the PCI bus type and the ACPI PM domain to
     support power management driver flags allowing device drivers to
     specify their capabilities and preferences regarding the handling
     of devices with enabled runtime PM during system suspend/resume and
     clean up that code somewhat (Rafael Wysocki, Ulf Hansson).

   - Add frequency-invariant accounting support to the task scheduler on
     ARM and ARM64 (Dietmar Eggemann).

   - Fix PM QoS device resume latency framework to prevent "no
     restriction" requests from overriding requests with specific
     requirements and drop the confusing PM_QOS_FLAG_REMOTE_WAKEUP
     device PM QoS flag (Rafael Wysocki).

   - Drop legacy class suspend/resume operations from the PM core and
     drop legacy bus type suspend and resume callbacks from ARM/locomo
     (Rafael Wysocki).

   - Add min/max frequency support to devfreq and clean it up somewhat
     (Chanwoo Choi).

   - Rework wakeup support in the generic power domains (genpd)
     framework and update some of its users accordingly (Geert
     Uytterhoeven).

   - Convert timers in the PM core to use timer_setup() (Kees Cook).

   - Add support for exposing the SLP_S0 (Low Power S0 Idle) residency
     counter based on the LPIT ACPI table on Intel platforms (Srinivas
     Pandruvada).

   - Add per-CPU PM QoS resume latency support to the ladder cpuidle
     governor (Ramesh Thomas).

   - Fix a deadlock between the wakeup notify handler and the notifier
     removal in the ACPI core (Ville Syrjälä).

   - Fix a cpufreq schedutil governor issue causing it to use stale
     cached frequency values sometimes (Viresh Kumar).

   - Fix an issue in the system suspend core support code causing wakeup
     events detection to fail in some cases (Rajat Jain).

   - Fix the generic power domains (genpd) framework to prevent the PM
     core from using the direct-complete optimization with it as that is
     guaranteed to fail (Ulf Hansson).

   - Fix a minor issue in the cpuidle core and clean it up a bit (Gaurav
     Jindal, Nicholas Piggin).

   - Fix and clean up the intel_idle and ARM cpuidle drivers (Jason
     Baron, Len Brown, Leo Yan).

   - Fix a couple of minor issues in the OPP framework and clean it up
     (Arvind Yadav, Fabio Estevam, Sudeep Holla, Tobias Jordan).

   - Fix and clean up some cpufreq drivers and fix a minor issue in the
     cpufreq statistics code (Arvind Yadav, Bhumika Goyal, Fabio
     Estevam, Gautham Shenoy, Gustavo Silva, Marek Szyprowski, Masahiro
     Yamada, Robert Jarzmik, Zumeng Chen).

   - Fix minor issues in the system suspend and hibernation core, in
     power management documentation and in the AVS (Adaptive Voltage
     Scaling) framework (Helge Deller, Himanshu Jha, Joe Perches, Rafael
     Wysocki).

   - Fix some issues in the cpupower utility and document that Shuah
     Khan is going to maintain it going forward (Prarit Bhargava, Shuah
     Khan)"

* tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (88 commits)
  tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore
  tools/power/cpupower: Add 64 bit library detection
  intel_idle: Graceful probe failure when MWAIT is disabled
  cpufreq: schedutil: Reset cached_raw_freq when not in sync with next_freq
  freezer: Fix typo in freezable_schedule_timeout() comment
  PM / s2idle: Clear the events_check_enabled flag
  cpufreq: stats: Handle the case when trans_table goes beyond PAGE_SIZE
  cpufreq: arm_big_little: make cpufreq_arm_bL_ops structures const
  cpufreq: arm_big_little: make function arguments and structure pointer const
  cpuidle: Avoid assignment in if () argument
  cpuidle: Clean up cpuidle_enable_device() error handling a bit
  ACPI / PM: Fix acpi_pm_notifier_lock vs flush_workqueue() deadlock
  PM / Domains: Fix genpd to deal with drivers returning 1 from ->prepare()
  cpuidle: ladder: Add per CPU PM QoS resume latency support
  PM / QoS: Fix device resume latency framework
  PM / domains: Rework governor code to be more consistent
  PM / Domains: Remove gpd_dev_ops.active_wakeup() callback
  soc: rockchip: power-domain: Use GENPD_FLAG_ACTIVE_WAKEUP
  soc: mediatek: Use GENPD_FLAG_ACTIVE_WAKEUP
  ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ACTIVE_WAKEUP
  ...
Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2017-11-14T02:23:19+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-11-14T02:23:19+00:00 7d58e1c9059eefe0066c5acf2ffa582f6f0180e3 Pull smp/hotplug updates from Thomas Gleixner: "No functional changes, just removal of obsolete and outdated defines, macros and documentation" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Get rid of CPU hotplug notifier leftovers cpu/hotplug: Remove obsolete notifier macros 
Pull smp/hotplug updates from Thomas Gleixner:
 "No functional changes, just removal of obsolete and outdated defines,
  macros and documentation"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Get rid of CPU hotplug notifier leftovers
  cpu/hotplug: Remove obsolete notifier macros
cpu/hotplug: Get rid of CPU hotplug notifier leftovers 2017-11-13T09:03:53+00:00 Thomas Gleixner tglx@linutronix.de 2017-11-13T08:39:01+00:00 f4c09f87adfe31587aa4b2aea2cb2dbde2150f54 The CPU hotplug notifiers are history. Remove the last reminders. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 
The CPU hotplug notifiers are history. Remove the last reminders.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>