Add set/show support for the ENABLE_ROCE NVM parameter to
enable/disable RoCE for a PF.

Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Co-developed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-4-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ICM is a portion of the host's memory assigned to a function by the OS
through requests made by the NIC's firmware.

PF ICM consumption can be accessed directly, while VF/SF ICM consumption
can be accessed through their representors in switchdev mode.

The value is exposed to the user in granularity of 4KB through the vnic
health reporter as follows:

$ devlink health diagnose pci/0000:08:00.0 reporter vnic
 vNIC env counters:
     total_error_queues: 0 send_queue_priority_update_flow: 0
     comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
     invalid_command: 0 quota_exceeded_command: 0
     nic_receive_steering_discard: 0 icm_consumption: 1032

Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250209101716.112774-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Update the information in sfc's devlink documentation including
 support for firmware update with devlink flash.
Also update the help text for CONFIG_SFC_MTD, as it is no longer
 strictly required for firmware updates.

Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/3476b0ef04a0944f03e0b771ec8ed1a9c70db4dc.1739186253.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use generic devlink PF MSI-X parameter to allow user to change MSI-X
range.

Add notes about this parameters into ice devlink documentation.

Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Add HW Steering mode to mlx5 devlink param of steering mode options.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-14-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add documentation for the following devlink params
- npc_mcam_high_zone_percent
- npc_def_rule_cntr
- nix_maxlf

Signed-off-by: Linu Cherian <lcherian@marvell.com>
Link: https://patch.msgid.link/20241105125620.2114301-4-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-07-11 (net/intel)

This series contains updates to most Intel network drivers.

Tony removes MODULE_AUTHOR from drivers containing the entry.

Simon Horman corrects a kdoc entry for i40e.

Pawel adds implementation for devlink param "local_forwarding" on ice.

Michal removes unneeded call, and code, for eswitch rebuild for ice.

Sasha removed a no longer used field from igc.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  igc: Remove the internal 'eee_advert' field
  ice: remove eswitch rebuild
  ice: Add support for devlink local_forwarding param
  i40e: correct i40e_addr_to_hkey() name in kdoc
  net: intel: Remove MODULE_AUTHORs
====================

Link: https://patch.msgid.link/20240711201932.2019925-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

Conflicts:

net/sched/act_ct.c
  26488172b029 ("net/sched: Fix UAF when resolving a clash")
  3abbd7ed8b76 ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")

No adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for driver-specific devlink local_forwarding param.
Supported values are "enabled", "disabled" and "prioritized".
Default configuration is set to "enabled".

Add documentation in networking/devlink/ice.rst.

In previous generations of Intel NICs the transmit scheduler was only
limited by PCIe bandwidth when scheduling/assigning hairpin-bandwidth
between VFs. Changes to E810 HW design introduced scheduler limitation,
so that available hairpin-bandwidth is bound to external port speed.
In order to address this limitation and enable NFV services such as
"service chaining" a knob to adjust the scheduler config was created.
Driver can send a configuration message to the FW over admin queue and
internal FW logic will reconfigure HW to prioritize and add more BW to
VF to VF traffic. An end result, for example, 10G port will no longer
limit hairpin-bandwidth to 10G and much higher speeds can be achieved.

Devlink local_forwarding param set to "prioritized" enables higher
hairpin-bandwitdh on related PFs. Configuration is applicable only to
8x10G and 4x25G cards.

Changing local_forwarding configuration will trigger CORER reset in
order to take effect.

Example command to change current value:
devlink dev param set pci/0000:b2:00.3 name local_forwarding \
        value prioritized \
        cmode runtime

Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Pawel Kaminski <pawel.kaminski@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Correct the example to match the help text from the devlink utility.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>