Now, all legacy application interfaces are restored.
Each driver documentation is updated.

Cc: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>

__initdata should be placed between the variable name and equal
sign for the variable to be placed in the intended section.
Fix the example.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Bryan Wu <cooloney@gmail.com>

LP8501 can drive up to 9 channels like LP5523.
LEDs can be controlled directly via the I2C and programmable engines are
supported.

LP55xx common driver
 LP8501 is one of LP55xx family device, so LP55xx common code are used.
 Chip specific data is defined in the structure, 'lp55xx_device_config'.

Differences between LP8501 and LP5523
 Different register layout for LED output control and others.
 LP8501 specific feature for separate output power selection.
 LP8501 doesn't support external clock detection.
 Different programming engine data.

LP8501 specific feature - output power selection
 Output channels are selected by power selection - Vout or Vdd.
 Separate power for VDD1-6 and VDD7-9 are available.
 It is configurable in the platform data.
 To support this feature, LP55xx DT structure and header are changed.
 Device tree binding is updated as well.

LED pattern data
 Example pattern data is updated in the driver documentation.

Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>

Now LP55xx provides automatic clock detection API, lp55xx_is_extclk_used().
The clock configuration can be done by the driver itself.

(a) Concept
The default value is set by each driver with clock selection.
The internal clock selection bit is updated in case that the external clock
is not detected or clock rate is not 32KHz.

(b) Change on LP55xx platform data
The clock configuration is done automatically, so no need to define
'update_config' in the platform side.
Correlated information are removed in the documentations and header.

(c) Definitions moved from header to driver files
CONFIG register values are moved each driver, LP5521 and LP5562.
Not necessary definitions are removed also.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>

LP5562 can drive up to 4 channels, RGB and White.
LEDs can be controlled directly via the led class control interface.

 LP55xx common driver
  LP5562 is one of LP55xx family device, so LP55xx common code are used.
  On the other hand, chip specific configuration is defined in the structure
  'lp55xx_device_config'

 LED pattern data
  LP5562 has also internal program memory which is used for running various LED
  patterns. LP5562 driver supports the firmware interface and the predefined
  pattern data as well.

 LP5562 device attributes: 'led_pattern' and 'engine_mux'
  A 'led_pattern' is an index code which runs the predefined pattern data.
  And 'engine_mux' is updated with the firmware interface is activated.
  Detailed description has been updated in the documentation files,
  'leds-lp55xx.txt' and 'leds-lp5562.txt'.

 Changes on the header file
  LP5562 configurable definitions are added.
  Pattern RGB data is fixed as constant value.
  (No side effect on other devices, LP5521 or LP5523.)

(cooloney@gmail.com: remove redundant mutex_unlock(). Reported by Dan
Carpenter <dan.carpenter@oracle.com>)

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>

 Update changed platform data information.
 Add leds-lp55xx.txt which includes the firmware interface description.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>

The name of each led channel is configurable.
If the name is NULL, just use the channel id for making the channel name

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>

Add driver for BlinkM device to drivers/leds/.
Add entry to MAINTAINERS file.
Add documentation in Documentation/leds/.

A BlinkM is a RGB LED controlled through I2C.

This driver implements an interface to the LED framework
and another sysfs group to access the internal options
of the BlinkM.

rev6: Use module_i2c_driver().
rev5: Removed own workqueue in favor of events wq.
rev4: Fixed comments by Bryan Wu.
rev3: Fixed issues found by Jonathan Neuschäfer.

(bryan.wu@canonical.com: remove 2 trailing whitespace)

Signed-off-by: Jan-Simon Möller <jansimon.moeller@gmx.de>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>

LM3556 :
The LM3556 is a 4 MHz fixed-frequency synchronous boost
converter plus 1.5A constant current driver for a high-current white LED.
Datasheet: www.national.com/ds/LM/LM3556.pdf

Tested on OMAP4430

(bryan.wu@canonical.com: use module_i2c_driver() rather than
lm3556_init/lm3556_exit for code simplicity; fixed some typo
pointed out by Rob Landley)

Signed-off-by: G.Shark Jeong <gshark.jeong@gmail.com>
Reviewed-by: Axel Lin <axel.lin@gmail.com>
Reviewed-by: Kim, Milo <Milo.Kim@ti.com>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>

Add oneshot trigger to blink a led with configurale parameters via
sysfs.

Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Cc: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>