<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/Documentation/kernel-parameters.txt, branch v2.6.33</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>ARM: allow alignment fault mode to be configured at kernel boot</title>
<updated>2010-02-20T16:20:49+00:00</updated>
<author>
<name>Russell King</name>
<email>rmk+kernel@arm.linux.org.uk</email>
</author>
<published>2010-02-20T16:13:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=d944d549aa86e08cba080396513234cf048fee1f'/>
<id>d944d549aa86e08cba080396513234cf048fee1f</id>
<content type='text'>
Some glibc versions intentionally create lots of alignment faults in
their gconv code, which if not fixed up, results in segfaults during
boot.  This can prevent systems booting properly.

There is no clear hard-configurable default for this; the desired
default depends on the nature of the userspace which is going to be
booted.

So, provide a way for the alignment fault handler to be configured via
the kernel command line.

Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Some glibc versions intentionally create lots of alignment faults in
their gconv code, which if not fixed up, results in segfaults during
boot.  This can prevent systems booting properly.

There is no clear hard-configurable default for this; the desired
default depends on the nature of the userspace which is going to be
booted.

So, provide a way for the alignment fault handler to be configured via
the kernel command line.

Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ACPI: processor: add kernel command line support for early _PDC eval</title>
<updated>2010-01-22T17:39:21+00:00</updated>
<author>
<name>Alex Chiang</name>
<email>achiang@hp.com</email>
</author>
<published>2010-01-20T07:06:30+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=0406ad336c066190770cbf350b552d608e43ed09'/>
<id>0406ad336c066190770cbf350b552d608e43ed09</id>
<content type='text'>
Allow platforms not listed in DMI table
to opt-in and evaluate _PDC early.

Signed-off-by: Alex Chiang &lt;achiang@hp.com&gt;
Signed-off-by: Len Brown &lt;len.brown@intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Allow platforms not listed in DMI table
to opt-in and evaluate _PDC early.

Signed-off-by: Alex Chiang &lt;achiang@hp.com&gt;
Signed-off-by: Len Brown &lt;len.brown@intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ACPI: introduce kernel parameter acpi_sleep=sci_force_enable</title>
<updated>2009-12-30T23:32:01+00:00</updated>
<author>
<name>Zhang Rui</name>
<email>rui.zhang@intel.com</email>
</author>
<published>2009-12-30T07:36:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=d7f0eea9e431e1b8b0742a74db1a9490730b2a25'/>
<id>d7f0eea9e431e1b8b0742a74db1a9490730b2a25</id>
<content type='text'>
Introduce kernel parameter acpi_sleep=sci_force_enable

some laptop requires SCI_EN being set directly on resume,
or else they hung somewhere in the resume code path.

We already have a blacklist for these laptops but we still need
this option, especially when debugging some suspend/resume problems,
in case there are systems that need this workaround and are not yet
in the blacklist.

Signed-off-by: Zhang Rui &lt;rui.zhang@intel.com&gt;
Acked-by: Rafael J. Wysocki &lt;rjw@sisk.pl&gt;
Signed-off-by: Len Brown &lt;len.brown@intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Introduce kernel parameter acpi_sleep=sci_force_enable

some laptop requires SCI_EN being set directly on resume,
or else they hung somewhere in the resume code path.

We already have a blacklist for these laptops but we still need
this option, especially when debugging some suspend/resume problems,
in case there are systems that need this workaround and are not yet
in the blacklist.

Signed-off-by: Zhang Rui &lt;rui.zhang@intel.com&gt;
Acked-by: Rafael J. Wysocki &lt;rjw@sisk.pl&gt;
Signed-off-by: Len Brown &lt;len.brown@intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'for-2.6.33' of git://linux-nfs.org/~bfields/linux</title>
<updated>2009-12-16T18:43:34+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2009-12-16T18:43:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=37c24b37fb2454e95136139d10bb6828967105bf'/>
<id>37c24b37fb2454e95136139d10bb6828967105bf</id>
<content type='text'>
* 'for-2.6.33' of git://linux-nfs.org/~bfields/linux: (42 commits)
  nfsd: remove pointless paths in file headers
  nfsd: move most of nfsfh.h to fs/nfsd
  nfsd: remove unused field rq_reffh
  nfsd: enable V4ROOT exports
  nfsd: make V4ROOT exports read-only
  nfsd: restrict filehandles accepted in V4ROOT case
  nfsd: allow exports of symlinks
  nfsd: filter readdir results in V4ROOT case
  nfsd: filter lookup results in V4ROOT case
  nfsd4: don't continue "under" mounts in V4ROOT case
  nfsd: introduce export flag for v4 pseudoroot
  nfsd: let "insecure" flag vary by pseudoflavor
  nfsd: new interface to advertise export features
  nfsd: Move private headers to source directory
  vfs: nfsctl.c un-used nfsd #includes
  lockd: Remove un-used nfsd headers #includes
  s390: remove un-used nfsd #includes
  sparc: remove un-used nfsd #includes
  parsic: remove un-used nfsd #includes
  compat.c: Remove dependence on nfsd private headers
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
* 'for-2.6.33' of git://linux-nfs.org/~bfields/linux: (42 commits)
  nfsd: remove pointless paths in file headers
  nfsd: move most of nfsfh.h to fs/nfsd
  nfsd: remove unused field rq_reffh
  nfsd: enable V4ROOT exports
  nfsd: make V4ROOT exports read-only
  nfsd: restrict filehandles accepted in V4ROOT case
  nfsd: allow exports of symlinks
  nfsd: filter readdir results in V4ROOT case
  nfsd: filter lookup results in V4ROOT case
  nfsd4: don't continue "under" mounts in V4ROOT case
  nfsd: introduce export flag for v4 pseudoroot
  nfsd: let "insecure" flag vary by pseudoflavor
  nfsd: new interface to advertise export features
  nfsd: Move private headers to source directory
  vfs: nfsctl.c un-used nfsd #includes
  lockd: Remove un-used nfsd headers #includes
  s390: remove un-used nfsd #includes
  sparc: remove un-used nfsd #includes
  parsic: remove un-used nfsd #includes
  compat.c: Remove dependence on nfsd private headers
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>vt: make the default cursor shape configurable</title>
<updated>2009-12-16T15:19:57+00:00</updated>
<author>
<name>Clemens Ladisch</name>
<email>clemens@ladisch.de</email>
</author>
<published>2009-12-16T00:45:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=9ea9a886b0e8630e12cff515955e7f0f5be32cb1'/>
<id>9ea9a886b0e8630e12cff515955e7f0f5be32cb1</id>
<content type='text'>
For embedded systems, the blinking cursor at startup time can be annoying
and unintended.  Add a new kernel parameter to change the default cursor
shape.

Signed-off-by: Clemens Ladisch &lt;clemens@ladisch.de&gt;
Cc: Daniel Mack &lt;daniel@caiaq.de&gt;
Acked-by: Pavel Machek &lt;pavel@ucw.cz&gt;
Cc: David Newall &lt;davidn@davidnewall.com&gt;
Cc: Alan Cox &lt;alan@lxorguk.ukuu.org.uk&gt;
Cc: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;
Cc: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
For embedded systems, the blinking cursor at startup time can be annoying
and unintended.  Add a new kernel parameter to change the default cursor
shape.

Signed-off-by: Clemens Ladisch &lt;clemens@ladisch.de&gt;
Cc: Daniel Mack &lt;daniel@caiaq.de&gt;
Acked-by: Pavel Machek &lt;pavel@ucw.cz&gt;
Cc: David Newall &lt;davidn@davidnewall.com&gt;
Cc: Alan Cox &lt;alan@lxorguk.ukuu.org.uk&gt;
Cc: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;
Cc: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6</title>
<updated>2009-12-12T19:40:13+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2009-12-12T19:40:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=9c3936cb694ffd559c80dc3eb75b61f769a39259'/>
<id>9c3936cb694ffd559c80dc3eb75b61f769a39259</id>
<content type='text'>
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (75 commits)
  omap3: Fix OMAP35XX_REV macros
  omap: serial: fix non-empty uart fifo read abort
  omap3: Zoom2/3: Update hsmmc board config params
  omap3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards
  omap3: id code detection 3525 vs 3515
  omap3: rx51: Use wl1251 in SPI mode 3
  omap3: zoom2/3: make MMC slot work again
  omap1: htcherald: Update defconfig to include mux support
  omap1: LCD_DMA: Use some define rather than a hexadecimal
  omap: header: remove unused data-type
  omap: arch/arm/plat-omap/devices.c - sort alphabetically
  omap: Correcting GPMC_CONFIG1_DEVICETYPE_NAND
  OMAP3: serial - allow platforms specify which UARTs to initialize
  omap3: cm-t35: add mux initialization
  OMAP4: Sync up omap4430 defconfig
  OMAP4: Remove the secondary wait loop
  OMAP4: AuxCoreBoot registers only accessible in secure mode
  OMAP4: Fix SRAM base and size
  OMAP4: Fix cpu detection
  omap3: pandora: board file updates for .33
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (75 commits)
  omap3: Fix OMAP35XX_REV macros
  omap: serial: fix non-empty uart fifo read abort
  omap3: Zoom2/3: Update hsmmc board config params
  omap3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards
  omap3: id code detection 3525 vs 3515
  omap3: rx51: Use wl1251 in SPI mode 3
  omap3: zoom2/3: make MMC slot work again
  omap1: htcherald: Update defconfig to include mux support
  omap1: LCD_DMA: Use some define rather than a hexadecimal
  omap: header: remove unused data-type
  omap: arch/arm/plat-omap/devices.c - sort alphabetically
  omap: Correcting GPMC_CONFIG1_DEVICETYPE_NAND
  OMAP3: serial - allow platforms specify which UARTs to initialize
  omap3: cm-t35: add mux initialization
  OMAP4: Sync up omap4430 defconfig
  OMAP4: Remove the secondary wait loop
  OMAP4: AuxCoreBoot registers only accessible in secure mode
  OMAP4: Fix SRAM base and size
  OMAP4: Fix cpu detection
  omap3: pandora: board file updates for .33
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>omap: mux: Add new style pin multiplexing code for omap3</title>
<updated>2009-12-12T00:16:32+00:00</updated>
<author>
<name>Tony Lindgren</name>
<email>tony@atomide.com</email>
</author>
<published>2009-12-12T00:16:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=15ac7afe515631ec36966b1cf632a87276536f57'/>
<id>15ac7afe515631ec36966b1cf632a87276536f57</id>
<content type='text'>
Initially only for 34xx. This code allows us to:

- Make the code more generic as the omap internal signal
  names can stay the same across omap generations for some
  devices

- Map mux registers to GPIO registers that is needed for
  dynamic muxing of pins during off-idle

- Override bootloader mux values via kernel cmdline using
  omap_mux=some.signa1=0x1234,some.signal2=0x1234

- View and set the mux registers via debugfs if
  CONFIG_DEBUG_FS is enabled

Cc: Mike Rapoport &lt;mike@compulab.co.il&gt;
Cc: Benoit Cousson &lt;b-cousson@ti.com&gt;
Signed-off-by: Paul Walmsley &lt;paul@pwsan.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Initially only for 34xx. This code allows us to:

- Make the code more generic as the omap internal signal
  names can stay the same across omap generations for some
  devices

- Map mux registers to GPIO registers that is needed for
  dynamic muxing of pins during off-idle

- Override bootloader mux values via kernel cmdline using
  omap_mux=some.signa1=0x1234,some.signal2=0x1234

- View and set the mux registers via debugfs if
  CONFIG_DEBUG_FS is enabled

Cc: Mike Rapoport &lt;mike@compulab.co.il&gt;
Cc: Benoit Cousson &lt;b-cousson@ti.com&gt;
Signed-off-by: Paul Walmsley &lt;paul@pwsan.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>USB: usb-storage: add BAD_SENSE flag</title>
<updated>2009-12-11T19:55:26+00:00</updated>
<author>
<name>Alan Stern</name>
<email>stern@rowland.harvard.edu</email>
</author>
<published>2009-12-07T21:39:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=a0bb108112a872c0b0c4b3ef4974f95fb75b155d'/>
<id>a0bb108112a872c0b0c4b3ef4974f95fb75b155d</id>
<content type='text'>
This patch (as1311) fixes a problem in usb-storage: Some devices are
pretty broken when it comes to reporting sense data.  The information
they send back indicates that they have more than 18 bytes of sense
data available, but when the system asks for more than 18 they fail or
hang.  The symptom is that probing fails with multiple resets.

The patch adds a new BAD_SENSE flag to indicate that usb-storage
should never ask for more than 18 bytes of sense data.  The flag can
be set in an unusual_devs entry or via the "quirks=" module parameter,
and it is set automatically whenever a REQUEST SENSE command for more
than 18 bytes fails or times out.

An unusual_devs entry is added for the Agfa photo frame, which uses a
Prolific chip having this bug.

Signed-off-by: Alan Stern &lt;stern@rowland.harvard.edu&gt;
Tested-by: Daniel Kukula &lt;daniel.kuku@gmail.com&gt;
Cc: stable &lt;stable@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This patch (as1311) fixes a problem in usb-storage: Some devices are
pretty broken when it comes to reporting sense data.  The information
they send back indicates that they have more than 18 bytes of sense
data available, but when the system asks for more than 18 they fail or
hang.  The symptom is that probing fails with multiple resets.

The patch adds a new BAD_SENSE flag to indicate that usb-storage
should never ask for more than 18 bytes of sense data.  The flag can
be set in an unusual_devs entry or via the "quirks=" module parameter,
and it is set automatically whenever a REQUEST SENSE command for more
than 18 bytes fails or times out.

An unusual_devs entry is added for the Agfa photo frame, which uses a
Prolific chip having this bug.

Signed-off-by: Alan Stern &lt;stern@rowland.harvard.edu&gt;
Tested-by: Daniel Kukula &lt;daniel.kuku@gmail.com&gt;
Cc: stable &lt;stable@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip</title>
<updated>2009-12-08T21:35:29+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2009-12-08T21:35:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=830cd2ac6ecce6b027d947fcdc724dd27a33813a'/>
<id>830cd2ac6ecce6b027d947fcdc724dd27a33813a</id>
<content type='text'>
* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  vgacon: Add support for setting the default cursor state
  vc: Add support for hiding the cursor when creating VTs
  x86, setup: Store the boot cursor state
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  vgacon: Add support for setting the default cursor state
  vc: Add support for hiding the cursor when creating VTs
  x86, setup: Store the boot cursor state
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6</title>
<updated>2009-12-08T15:55:01+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2009-12-08T15:55:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=d7fc02c7bae7b1cf69269992cf880a43a350cdaa'/>
<id>d7fc02c7bae7b1cf69269992cf880a43a350cdaa</id>
<content type='text'>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1815 commits)
  mac80211: fix reorder buffer release
  iwmc3200wifi: Enable wimax core through module parameter
  iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameter
  iwmc3200wifi: Coex table command does not expect a response
  iwmc3200wifi: Update wiwi priority table
  iwlwifi: driver version track kernel version
  iwlwifi: indicate uCode type when fail dump error/event log
  iwl3945: remove duplicated event logging code
  b43: fix two warnings
  ipw2100: fix rebooting hang with driver loaded
  cfg80211: indent regulatory messages with spaces
  iwmc3200wifi: fix NULL pointer dereference in pmkid update
  mac80211: Fix TX status reporting for injected data frames
  ath9k: enable 2GHz band only if the device supports it
  airo: Fix integer overflow warning
  rt2x00: Fix padding bug on L2PAD devices.
  WE: Fix set events not propagated
  b43legacy: avoid PPC fault during resume
  b43: avoid PPC fault during resume
  tcp: fix a timewait refcnt race
  ...

Fix up conflicts due to sysctl cleanups (dead sysctl_check code and
CTL_UNNUMBERED removed) in
	kernel/sysctl_check.c
	net/ipv4/sysctl_net_ipv4.c
	net/ipv6/addrconf.c
	net/sctp/sysctl.c
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1815 commits)
  mac80211: fix reorder buffer release
  iwmc3200wifi: Enable wimax core through module parameter
  iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameter
  iwmc3200wifi: Coex table command does not expect a response
  iwmc3200wifi: Update wiwi priority table
  iwlwifi: driver version track kernel version
  iwlwifi: indicate uCode type when fail dump error/event log
  iwl3945: remove duplicated event logging code
  b43: fix two warnings
  ipw2100: fix rebooting hang with driver loaded
  cfg80211: indent regulatory messages with spaces
  iwmc3200wifi: fix NULL pointer dereference in pmkid update
  mac80211: Fix TX status reporting for injected data frames
  ath9k: enable 2GHz band only if the device supports it
  airo: Fix integer overflow warning
  rt2x00: Fix padding bug on L2PAD devices.
  WE: Fix set events not propagated
  b43legacy: avoid PPC fault during resume
  b43: avoid PPC fault during resume
  tcp: fix a timewait refcnt race
  ...

Fix up conflicts due to sysctl cleanups (dead sysctl_check code and
CTL_UNNUMBERED removed) in
	kernel/sysctl_check.c
	net/ipv4/sysctl_net_ipv4.c
	net/ipv6/addrconf.c
	net/sctp/sysctl.c
</pre>
</div>
</content>
</entry>
</feed>
