Pull documentation updates from Jonathan Corbet:
 "Documentation work keeps chugging along; this includes:

   - Work from Carlos Bilbao to integrate rustdoc output into the
     generated HTML documentation. This took some work to figure out how
     to do it without slowing the docs build and without creating people
     who don't have Rust installed, but Carlos got there

   - Move the loongarch and mips architecture documentation under
     Documentation/arch/

   - Some more maintainer documentation from Jakub

  ... plus the usual assortment of updates, translations, and fixes"

* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
  Docu: genericirq.rst: fix irq-example
  input: docs: pxrc: remove reference to phoenix-sim
  Documentation: serial-console: Fix literal block marker
  docs/mm: remove references to hmm_mirror ops and clean typos
  docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
  Documentation: Fix typos
  Documentation/ABI: Fix typos
  scripts: kernel-doc: fix macro handling in enums
  scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
  Documentation: riscv: Update boot image header since EFI stub is supported
  Documentation: riscv: Add early boot document
  Documentation: arm: Add bootargs to the table of added DT parameters
  docs: kernel-parameters: Refer to the correct bitmap function
  doc: update params of memhp_default_state=
  docs: Add book to process/kernel-docs.rst
  docs: sparse: fix invalid link addresses
  docs: vfs: clean up after the iterate() removal
  docs: Add a section on surveys to the researcher guidelines
  docs: move mips under arch
  docs: move loongarch under arch
  ...

Add base support for Renesas HS3001 temperature
and humidity sensors and its compatibles HS3002,
HS3003 and HS3004.

The sensor has a fix I2C address 0x44. The resolution
is fixed to 14bit (ref. Missing feature).

Missing feature:
- Accessing non-volatile memory: Custom board has no
  possibility to control voltage supply of sensor. Thus,
  we cannot send the necessary control commands within
  the first 10ms after power-on.

Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Link: https://lore.kernel.org/r/20230725042207.22310-2-andre.werner@systec-electronic.com
[groeck: Cosmetic documentation fixup; added documentation to index;
 replaced probe_new with probe dropped unused variable]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

SMM665 and related chips are power controller/sequencer chips from
Summit Microelectronics. The company was acquired by Qualcomm in 2012,
and support for the chip series stopped.

The chips are long since gone from active use, making the driver
unsupportable and just consuming space and compile time. Remove it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

nct6799d-r and nct6796d-s are very similar and chip_id is only
different in the version nibblet.

Since both will be detected by the driver anyway due to the
chipid mask, they should be labeled together for dmesg msg.

Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20230715195244.1334723-1-ahmad@khalifa.ws
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Since commit 03c835f498b5 ("i2c: Switch .probe() to not take an id
parameter") .probe() is the recommended callback to implement an i2c
driver (again). Reflect this in the documentation and don't mention
.probe_new() which will be dropped soon.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230627064948.593804-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Fix typos in Documentation.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230814212822.193684-4-helgaas@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

This device is an iteration over the AOKZOE A1 with the same EC mapping
and features.

It also has support for tt_toggle.

Signed-off-by: Jerrod Frost <jcfrosty@proton.me>
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Link: https://lore.kernel.org/r/20230625012347.121352-2-samsagax@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The series 2022/2023 reports slightly longer vendor/product strings
and shares USB ids. Technically the reply size is the USB HID packet
size (64 bytes) but all the supported commands do not use more than 8
bytes and replies reporting back strings do not use more then 24 bytes
(vendor and product are in one string in the newer devices now). The
rest of the reply is always filled with '\0'. Also update comments
and documentation accordingly.

Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/ZJbB72CAPmLflhHG@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Fix some typos, adjust documentation and comments to current state of
knowledge and update coding style to be more uniform.

Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/ZJWf3H972hGgLK-8@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add support for reading PWM values and mode,
and update documentation accordingly.

Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/ZJSASByXpzoZ0XyH@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>