Pull hwmon updates from Guenter Roeck:
 "Updated chip support in existing drivers:

   - ina238: Support for INA228

   - pmbus/tps53679: Support for TPS53685

   - pmbus/adp1050: Support for adp1051, adp1055 and ltp8800

   - corsair-psu: Support for HX1200i Series 2025

   - pmbus/isl68137: Support for RAA229621

   - asus-ec-sensors: Support for ProArt X870E-CREATOR WIFI and

  Other notable changes:

   - adt7475: Support for #pwm-cells = <3>

   - amc6821: Cooling device support

   - emc2305: Support for PWM frequency, polarity and output

   - Add missing compatible entries to various devicetree bindings

  And various other minor fixes and improvements"

* tag 'hwmon-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (34 commits)
  dt-bindings: hwmon: Replace bouncing Alexandru Tachici emails
  hwmon: (ina238) Add support for INA228
  dt-bindings: Add INA228 to ina2xx devicetree bindings
  hwmon: (ina238) Fix inconsistent whitespace
  dt-bindings: hwmon: adt7475: Allow and recommend #pwm-cells = <3>
  hwmon: (adt7475) Implement support for #pwm-cells = <3>
  hwmon: (pmbus/tps53679) Add support for TPS53685
  dt-bindings: trivial: Add tps53685 support
  hwmon: (pmbus/adp1050) Add regulator support for ltp8800
  hwmon: (pmbus/adp1050) Add support for adp1051, adp1055 and ltp8800
  dt-bindings: hwmon: pmbus/adp1050: Add adp1051, adp1055 and ltp8800
  hwmon: (max31827) use sysfs_emit() in temp1_resolution_show()
  hwmon: (ltc4282) convert from round_rate() to determine_rate()
  hwmon: (corsair-psu) add support for HX1200i Series 2025
  dt-bindings: hwmon: pmbus: ti,ucd90320: Add missing compatibles
  dt-bindings: hwmon: maxim,max20730: Add maxim,max20710 compatible
  dt-bindings: hwmon: lltc,ltc2978: Add lltc,ltc713 compatible
  dt-bindings: hwmon: ti,lm87: Add adi,adm1024 compatible
  dt-bindings: hwmon: national,lm90: Add missing Dallas max6654 and onsemi nct72, nct214, and nct218
  hwmon: (w83627ehf) make the read-only arrays 'bit' static const
  ...

Pull pwm updates from Uwe Kleine-König:
 "Apart from the usual mix of new drivers (pwm-argon-fan-hat), adding
  support for variants to existing drivers, minor improvements to both
  drivers and docs, device tree documenation updates, the noteworthy
  changes are:

   - A hwmon companion driver to pwm-mc33xs2410 living in drivers/hwmon
     and acked by Guenter Roeck

   - chardev support for PWM devices. This leverages atomic PWM updates
     to userspace and at the same time simplifies and accelerates PWM
     configuration changes"

* tag 'pwm/for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (35 commits)
  pwm: raspberrypi-poe: Fix spelling mistake "Firwmware" -> "Firmware"
  hwmon: add support for MC33XS2410 hardware monitoring
  pwm: mc33xs2410: add hwmon support
  pwm: img: Remove redundant pm_runtime_mark_last_busy() calls
  pwm: Expose PWM_WFHWSIZE in public header
  dt-bindings: pwm: Convert lpc32xx-pwm.txt to yaml format
  docs: pwm: Adapt Locking paragraph to reality
  pwm: twl-led: Drop driver local locking
  pwm: sun4i: Drop driver local locking
  pwm: sti: Drop driver local locking
  pwm: microchip-core: Drop driver local locking
  pwm: lpc18xx-sct: Drop driver local locking
  pwm: fsl-ftm: Drop driver local locking
  pwm: clps711x: Drop driver local locking
  pwm: atmel: Drop driver local locking
  pwm: argon-fan-hat: Add Argon40 Fan HAT support
  dt-bindings: pwm: argon40,fan-hat: Document Argon40 Fan HAT
  dt-bindings: vendor-prefixes: Document Argon40
  pwm: pwm-mediatek: Add support for PWM IP V3.0.2 in MT6991/MT8196
  pwm: pwm-mediatek: Pass PWM_CK_26M_SEL from platform data
  ...

The device is able to monitor temperature, voltage and current of each of
the four outputs. Add basic support for monitoring the temperature of the
four outputs and the die temperature.

Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250723-mc33xs2410-hwmon-v5-2-f62aab71cd59@liebherr.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>

The TPS53685 is a fully AMD SVI3 compliant step down controller with
trans-inductor voltage regulator(TLVR) topology support, dual channels,
built-in non-volatile memory (NVM), PMBus interface, and full compatible
with TI NexFET smart power stages.

Add support for it to the tps53679 driver.

Signed-off-by: Chiang Brian <chiang.brian@inventec.com>
Link: https://lore.kernel.org/r/20250619064223.3165523-3-chiang.brian@inventec.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Introduce hardware monitoring support for the following devices:

    ADP1051: 6 PWM for I/O Voltage, I/O Current, Temperature
    ADP1055: 6 PWM for I/O Voltage, I/O Current, Power, Temperature
    LTP8800-1A/-2/-4A: 150A/135A/200A DC/DC µModule Regulator

The ADP1051 and ADP1055 are similar digital controllers for high
efficiency DC-DC power conversion while the LTP8800 is a family of
step-down μModule regulators that provides microprocessor core voltage
from 54V power distribution architecture. All of the above components
features telemetry monitoring of input/output voltage, input current,
output power, and temperature over PMBus.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
Link: https://lore.kernel.org/r/20250709-adp1051-v5-2-539254692252@analog.com
[groeck: Dropped unnecessaary spaces after type casts]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add the USB ID of the Corsair HXi Series 2025 HX1200i PSU (CP-9020307).
Update the documentation to mention this.

Signed-off-by: Shantanu Tushar <shantanu@kde.org>
Reviewed-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/20250630201444.210420-1-shantanu@kde.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Adds support for the ProArt X870E-CREATOR WIFI board.

Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250607102626.9051-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

This adds support for the ROG STRIX Z490-F GAMING board.

Signed-off-by: Roy Seitz <royseitz@bluewin.ch>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250529090222.154696-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The hwmon sysfs interface specifies that energy values should be
reported in microjoules. This is also what tools such as lmsensors
expect, reporting wrong values otherwise.

Adjust the driver to scale the output accordingly and adjust ina238
driver documentation.

Fixes: 6daaf15a1173 ("hwmon: (ina238) Add support for SQ52206")
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://lore.kernel.org/r/20250715-hwmon-ina238-microjoules-v1-1-9df678568a41@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Pull hwmon updates from Guenter Roeck:
 "New drivers:
   - KEBA fan controller
   - KEBA battery monitoring controller
   - MAX77705

  Support added to existing drivers:
   - MAXIMUS VI HERO and ROG MAXIMUS Z90 Formula support (asus-ec-sensors)
   - SQ52206 support (ina238)
   - lt3074 support (pmbus/lt3074)
   - ADPM12160 support (pmbus/max34440)
   - MPM82504 and for MPM3695 family support (pmbus/mpq8785)
   - Add the Dell OptiPlex 7050 to the DMI whitelist (dell-smm)
   - Zen5 Ryzen Desktop support (k10temp)

  Various other minor fixes and improvements"

* tag 'hwmon-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (48 commits)
  doc: hwmon: acpi_power_meter: Add information about enabling the power capping feature.
  hwmon: (isl28022) Fix current reading calculation
  hwmon: (lm75) Fix I3C transfer buffer pointer for incoming data
  hwmon: Add KEBA fan controller support
  hwmon: pmbus: mpq8785: Add support for MPM3695 family
  hwmon: pmbus: mpq8785: Add support for MPM82504
  hwmon: pmbus: mpq8785: Implement VOUT feedback resistor divider ratio configuration
  hwmon: pmbus: mpq8785: Prepare driver for multiple device support
  dt-bindings: hwmon: Add bindings for mpq8785 driver
  hwmon: (ina238) Modify the calculation formula to adapt to different chips
  hwmon: (ina238) Add support for SQ52206
  dt-bindings: Add SQ52206 to ina2xx devicetree bindings
  hwmon: (ina238) Add ina238_config to save configurations for different chips
  hwmon: (ausus-ec-sensors) add MAXIMUS VI HERO.
  hwmon: (isl28022, nct7363) Convert to use maple tree register cache
  hwmon: (asus-ec-sensors) check sensor index in read_string()
  hwmon: (asus-ec-sensors) add ROG MAXIMUS Z90 Formula.
  dt-bindings: hwmon: Add Sophgo SG2044 external hardware monitor support
  hwmon: (max77705) Add initial support
  hwmon: (tmp102) add vcc regulator support
  ...