linux.git/Documentation/hwmon/it87, branch v4.2

hwmon: (it87) Add support for IT8620E

2015-04-05T13:01:00+00:00

IT8620E is mostly compatible to IT7828F. Add generic support for it.

IT8620E supports up to 6 fan tachometers and 6 pwm controls.
Support for the 6th tachometer and for the additional pwm controls
are addded in separate patches.

Reviewed-by: Jean Delvare 
Signed-off-by: Guenter Roeck

hwmon: (it87) Add support for IT8790E

2015-04-05T13:00:59+00:00

IT8790E is a super-IO chip with three fan tachometers. It is mostly
compatible to IT8728F, but only supports three fan tachometers
instead of five.

Reviewed-by: Jean Delvare 
Signed-off-by: Guenter Roeck

hwmon: (it87) Add support for IT8786E

2015-03-09T16:59:36+00:00

IT8786E is mostly compatible with IT8771 / IT8772.
Parameters determined by testing various combinations.

Reviewed-by: Jean Delvare 
Signed-off-by: Thomas Lorblanches 
[Guenter Roeck: merged from github, addressed review comments]
Signed-off-by: Guenter Roeck

hwmon: (it87) Add support for IT8781F

2015-03-09T16:59:35+00:00

IT8781F is mostly compatible to IT8782F. Major difference is that it only
supports four instead of six UART channels, and therefore does not share
the uart6 pins.

Reviewed-by: Jean Delvare 
Signed-off-by: Guenter Roeck

hwmon: (it87) Add support for IT8623E

2014-04-04T16:01:35+00:00

Add support for the IT8623E found on Asus motherboards. It has same
hardware monitoring block as IT8603E.

Signed-off-by: Rudolf Marek 
Signed-off-by: Jean Delvare

Update Jean Delvare's e-mail address

2014-01-29T19:40:08+00:00

Signed-off-by: Jean Delvare

hwmon: (it87) Add support for the ITE IT8603E

2014-01-29T19:40:08+00:00

Add support for IT8603E.

This closes bug #57861:
https://bugzilla.kernel.org/show_bug.cgi?id=57861

[JD: Fixes and clean-ups.]

Signed-off-by: Rudolf Marek 
Signed-off-by: Jean Delvare

hwmon: (it87) Add support for IT8771E and IT8772E

2013-02-06T17:57:56+00:00

Assume that IT8771E and IT8772E are fully compatible with IT8728F.

IT8771E support contributed by Kelly Anderson.

Signed-off-by: Guenter Roeck 
Reviewed-by: Jean Delvare

hwmon: (it87) Report thermal sensor type as Intel PECI if appropriate

2012-12-19T21:17:02+00:00

IT8721 and IT8728 support Intel PECI temperature reporting. Each sensor
can be programmed to display the temperature reported on the PECI interface.

If configured for Intel PECI, the driver reported the wrong sensor type for
the respective thermal sensor. Fix the code to correctly report it as
"Intel PECI (6)".

Signed-off-by: Guenter Roeck 
Signed-off-by: Jean Delvare

hwmon: (it87) Introduce support for tempX_offset sysfs attribute

2012-12-19T21:17:01+00:00

Signed-off-by: Guenter Roeck 
Signed-off-by: Jean Delvare