<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/Documentation/gpio, branch v4.19</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>Documentation: gpio: Move drivers-on-gpio.txt to driver-api</title>
<updated>2018-03-23T03:22:29+00:00</updated>
<author>
<name>Jonathan Neuschäfer</name>
<email>j.neuschaefer@gmx.net</email>
</author>
<published>2018-03-08T23:40:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=4784e710b1653bee64e5f85d7dba70e8e62f8473'/>
<id>4784e710b1653bee64e5f85d7dba70e8e62f8473</id>
<content type='text'>
Move gpio/drivers-on-gpio.txt to driver-api/gpio/drivers-on-gpio.rst and
make sure it builds cleanly as ReST.

Signed-off-by: Jonathan Neuschäfer &lt;j.neuschaefer@gmx.net&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move gpio/drivers-on-gpio.txt to driver-api/gpio/drivers-on-gpio.rst and
make sure it builds cleanly as ReST.

Signed-off-by: Jonathan Neuschäfer &lt;j.neuschaefer@gmx.net&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Documentation: gpio: Move GPIO mapping documentation to driver-api</title>
<updated>2018-03-23T03:22:04+00:00</updated>
<author>
<name>Jonathan Neuschäfer</name>
<email>j.neuschaefer@gmx.net</email>
</author>
<published>2018-03-08T23:40:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=6960341aa33420a8aadf1d625b486933487e6592'/>
<id>6960341aa33420a8aadf1d625b486933487e6592</id>
<content type='text'>
Move gpio/board.txt to driver-api/gpio/board.rst and make sure it builds
cleanly as ReST.

Signed-off-by: Jonathan Neuschäfer &lt;j.neuschaefer@gmx.net&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move gpio/board.txt to driver-api/gpio/board.rst and make sure it builds
cleanly as ReST.

Signed-off-by: Jonathan Neuschäfer &lt;j.neuschaefer@gmx.net&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Documentation: gpio: Move gpiod_* consumer documentation to driver-api</title>
<updated>2018-03-23T03:21:40+00:00</updated>
<author>
<name>Jonathan Neuschäfer</name>
<email>j.neuschaefer@gmx.net</email>
</author>
<published>2018-03-08T23:40:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=4e0edc4b3fe7ee2ecb07360146479dbbeb63cd5a'/>
<id>4e0edc4b3fe7ee2ecb07360146479dbbeb63cd5a</id>
<content type='text'>
Move gpio/consumer.txt to driver-api/gpio/consumer.rst and make sure it
builds cleanly as ReST.

Signed-off-by: Jonathan Neuschäfer &lt;j.neuschaefer@gmx.net&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move gpio/consumer.txt to driver-api/gpio/consumer.rst and make sure it
builds cleanly as ReST.

Signed-off-by: Jonathan Neuschäfer &lt;j.neuschaefer@gmx.net&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Documentation: gpio: Move legacy documentation to driver-api</title>
<updated>2018-03-23T03:21:16+00:00</updated>
<author>
<name>Jonathan Neuschäfer</name>
<email>j.neuschaefer@gmx.net</email>
</author>
<published>2018-03-08T23:40:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=7ee2c13080c99e7ba01c45841e7fd61cdd37fc65'/>
<id>7ee2c13080c99e7ba01c45841e7fd61cdd37fc65</id>
<content type='text'>
Move gpio/gpio-legacy.txt to driver-api/gpio/legacy.rst and make sure it
builds cleanly as ReST.

Also move the legacy API reference from index.rst to legacy.rst.

Signed-off-by: Jonathan Neuschäfer &lt;j.neuschaefer@gmx.net&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move gpio/gpio-legacy.txt to driver-api/gpio/legacy.rst and make sure it
builds cleanly as ReST.

Also move the legacy API reference from index.rst to legacy.rst.

Signed-off-by: Jonathan Neuschäfer &lt;j.neuschaefer@gmx.net&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Documentation: gpio: Move driver documentation to driver-api</title>
<updated>2018-03-23T03:20:54+00:00</updated>
<author>
<name>Jonathan Neuschäfer</name>
<email>j.neuschaefer@gmx.net</email>
</author>
<published>2018-03-08T23:40:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=778ea833c59a750318ec83443aa103e09e6cd3de'/>
<id>778ea833c59a750318ec83443aa103e09e6cd3de</id>
<content type='text'>
Move gpio/driver.txt to driver-api/gpio/driver.rst and make sure it
builds cleanly as ReST.

Signed-off-by: Jonathan Neuschäfer &lt;j.neuschaefer@gmx.net&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move gpio/driver.txt to driver-api/gpio/driver.rst and make sure it
builds cleanly as ReST.

Signed-off-by: Jonathan Neuschäfer &lt;j.neuschaefer@gmx.net&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Documentation: gpio: Move introduction to driver-api</title>
<updated>2018-03-23T03:20:30+00:00</updated>
<author>
<name>Jonathan Neuschäfer</name>
<email>j.neuschaefer@gmx.net</email>
</author>
<published>2018-03-08T23:40:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=02bf219d2f627dc962b43975433dcd6ce8f02c85'/>
<id>02bf219d2f627dc962b43975433dcd6ce8f02c85</id>
<content type='text'>
Move gpio/intro.txt to driver-api/gpio/intro.rst and make sure it builds
cleanly as ReST.

Signed-off-by: Jonathan Neuschäfer &lt;j.neuschaefer@gmx.net&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move gpio/intro.txt to driver-api/gpio/intro.rst and make sure it builds
cleanly as ReST.

Signed-off-by: Jonathan Neuschäfer &lt;j.neuschaefer@gmx.net&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input</title>
<updated>2018-02-01T18:49:58+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2018-02-01T18:49:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=eea43ed86f38347979446905a20792a8be7bf5d1'/>
<id>eea43ed86f38347979446905a20792a8be7bf5d1</id>
<content type='text'>
Pull input layer updates from Dmitry Torokhov:

 - evdev interface has been adjusted to extend the life of timestamps on
   32 bit systems to the year of 2108

 - Synaptics RMI4 driver's PS/2 guest handling ha beed updated to
   improve chances of detecting trackpoints on the pass-through port

 - mms114 touchcsreen controller driver has been updated to support
   generic device properties and work with mms152 cntrollers

 - Goodix driver now supports generic touchscreen properties

 - couple of drivers for AVR32 architecture are gone as the architecture
   support has been removed from the kernel

 - gpio-tilt driver has been removed as there are no mainline users and
   the driver itself is using legacy APIs and relies on platform data

 - MODULE_LINECSE/MODULE_VERSION cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
  Input: goodix - use generic touchscreen_properties
  Input: mms114 - fix typo in definition
  Input: mms114 - use BIT() macro instead of explicit shifting
  Input: mms114 - replace mdelay with msleep
  Input: mms114 - add support for mms152
  Input: mms114 - drop platform data and use generic APIs
  Input: mms114 - mark as direct input device
  Input: mms114 - do not clobber interrupt trigger
  Input: edt-ft5x06 - fix error handling for factory mode on non-M06
  Input: stmfts - set IRQ_NOAUTOEN to the irq flag
  Input: auo-pixcir-ts - delete an unnecessary return statement
  Input: auo-pixcir-ts - remove custom log for a failed memory allocation
  Input: da9052_tsi - remove unused mutex
  Input: docs - use PROPERTY_ENTRY_U32() directly
  Input: synaptics-rmi4 - log when we create a guest serio port
  Input: synaptics-rmi4 - unmask F03 interrupts when port is opened
  Input: synaptics-rmi4 - do not delete interrupt memory too early
  Input: ad7877 - use managed resource allocations
  Input: stmfts,s6sy671 - add SPDX identifier
  Input: remove atmel-wm97xx touchscreen driver
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull input layer updates from Dmitry Torokhov:

 - evdev interface has been adjusted to extend the life of timestamps on
   32 bit systems to the year of 2108

 - Synaptics RMI4 driver's PS/2 guest handling ha beed updated to
   improve chances of detecting trackpoints on the pass-through port

 - mms114 touchcsreen controller driver has been updated to support
   generic device properties and work with mms152 cntrollers

 - Goodix driver now supports generic touchscreen properties

 - couple of drivers for AVR32 architecture are gone as the architecture
   support has been removed from the kernel

 - gpio-tilt driver has been removed as there are no mainline users and
   the driver itself is using legacy APIs and relies on platform data

 - MODULE_LINECSE/MODULE_VERSION cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
  Input: goodix - use generic touchscreen_properties
  Input: mms114 - fix typo in definition
  Input: mms114 - use BIT() macro instead of explicit shifting
  Input: mms114 - replace mdelay with msleep
  Input: mms114 - add support for mms152
  Input: mms114 - drop platform data and use generic APIs
  Input: mms114 - mark as direct input device
  Input: mms114 - do not clobber interrupt trigger
  Input: edt-ft5x06 - fix error handling for factory mode on non-M06
  Input: stmfts - set IRQ_NOAUTOEN to the irq flag
  Input: auo-pixcir-ts - delete an unnecessary return statement
  Input: auo-pixcir-ts - remove custom log for a failed memory allocation
  Input: da9052_tsi - remove unused mutex
  Input: docs - use PROPERTY_ENTRY_U32() directly
  Input: synaptics-rmi4 - log when we create a guest serio port
  Input: synaptics-rmi4 - unmask F03 interrupts when port is opened
  Input: synaptics-rmi4 - do not delete interrupt memory too early
  Input: ad7877 - use managed resource allocations
  Input: stmfts,s6sy671 - add SPDX identifier
  Input: remove atmel-wm97xx touchscreen driver
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>gpio: Fix a documentation spelling mistake</title>
<updated>2018-01-21T15:52:31+00:00</updated>
<author>
<name>Linus Walleij</name>
<email>linus.walleij@linaro.org</email>
</author>
<published>2018-01-21T15:52:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=2046362cf11d3dcb0c6904f7f3209c568d7858b3'/>
<id>2046362cf11d3dcb0c6904f7f3209c568d7858b3</id>
<content type='text'>
Simple etraneous letter.

Reported-by: Alexander Stein &lt;alexander.stein@systec-electronic.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Simple etraneous letter.

Reported-by: Alexander Stein &lt;alexander.stein@systec-electronic.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>gpio: Documentation update</title>
<updated>2018-01-18T09:43:43+00:00</updated>
<author>
<name>Linus Walleij</name>
<email>linus.walleij@linaro.org</email>
</author>
<published>2018-01-18T09:43:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=adbf02998b2e21e3f055f72fe2daa86260f03637'/>
<id>adbf02998b2e21e3f055f72fe2daa86260f03637</id>
<content type='text'>
Update a slew of documentation files with the latest changes in the
API/ABI. Again stress that sysfs is deprecated. Add all new flags and
clean up and move some text.

Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Update a slew of documentation files with the latest changes in the
API/ABI. Again stress that sysfs is deprecated. Add all new flags and
clean up and move some text.

Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Documentation: gpio: correct return value of gpiod_get_direction</title>
<updated>2018-01-09T14:36:19+00:00</updated>
<author>
<name>Wolfram Sang</name>
<email>wsa+renesas@sang-engineering.com</email>
</author>
<published>2018-01-09T11:35:54+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=9961dbcd228e868224f5f725dfae69de739855dc'/>
<id>9961dbcd228e868224f5f725dfae69de739855dc</id>
<content type='text'>
The use of the GPIOF_* flags is deprecated, so don't advertise them
here. Document the plain numbers for now until we have a better
solution.

Signed-off-by: Wolfram Sang &lt;wsa+renesas@sang-engineering.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The use of the GPIOF_* flags is deprecated, so don't advertise them
here. Document the plain numbers for now until we have a better
solution.

Signed-off-by: Wolfram Sang &lt;wsa+renesas@sang-engineering.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
