<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/Documentation/filesystems/Locking, branch v4.8</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>get rid of 'parent' argument of -&gt;d_compare()</title>
<updated>2016-07-31T20:37:25+00:00</updated>
<author>
<name>Al Viro</name>
<email>viro@zeniv.linux.org.uk</email>
</author>
<published>2016-07-31T20:37:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=6fa67e707559303e086303aeecc9e8b91ef497d5'/>
<id>6fa67e707559303e086303aeecc9e8b91ef497d5</id>
<content type='text'>
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm</title>
<updated>2016-07-29T00:38:16+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2016-07-29T00:22:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=f0c98ebc57c2d5e535bc4f9167f35650d2ba3c90'/>
<id>f0c98ebc57c2d5e535bc4f9167f35650d2ba3c90</id>
<content type='text'>
Pull libnvdimm updates from Dan Williams:

 - Replace pcommit with ADR / directed-flushing.

   The pcommit instruction, which has not shipped on any product, is
   deprecated.  Instead, the requirement is that platforms implement
   either ADR, or provide one or more flush addresses per nvdimm.

   ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers
   to the memory controller on a power-fail event.

   Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware
   Interface Table (NFIT) sub-structure: "Flush Hint Address Structure".
   A flush hint is an mmio address that when written and fenced assures
   that all previous posted writes targeting a given dimm have been
   flushed to media.

 - On-demand ARS (address range scrub).

   Linux uses the results of the ACPI ARS commands to track bad blocks
   in pmem devices.  When latent errors are detected we re-scrub the
   media to refresh the bad block list, userspace can also request a
   re-scrub at any time.

 - Support for the Microsoft DSM (device specific method) command
   format.

 - Support for EDK2/OVMF virtual disk device memory ranges.

 - Various fixes and cleanups across the subsystem.

* tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits)
  libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register"
  nfit: do an ARS scrub on hitting a latent media error
  nfit: move to nfit/ sub-directory
  nfit, libnvdimm: allow an ARS scrub to be triggered on demand
  libnvdimm: register nvdimm_bus devices with an nd_bus driver
  pmem: clarify a debug print in pmem_clear_poison
  x86/insn: remove pcommit
  Revert "KVM: x86: add pcommit support"
  nfit, tools/testing/nvdimm/: unify shutdown paths
  libnvdimm: move -&gt;module to struct nvdimm_bus_descriptor
  nfit: cleanup acpi_nfit_init calling convention
  nfit: fix _FIT evaluation memory leak + use after free
  tools/testing/nvdimm: add manufacturing_{date|location} dimm properties
  tools/testing/nvdimm: add virtual ramdisk range
  acpi, nfit: treat virtual ramdisk SPA as pmem region
  pmem: kill __pmem address space
  pmem: kill wmb_pmem()
  libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes
  fs/dax: remove wmb_pmem()
  libnvdimm, pmem: flush posted-write queues on shutdown
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull libnvdimm updates from Dan Williams:

 - Replace pcommit with ADR / directed-flushing.

   The pcommit instruction, which has not shipped on any product, is
   deprecated.  Instead, the requirement is that platforms implement
   either ADR, or provide one or more flush addresses per nvdimm.

   ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers
   to the memory controller on a power-fail event.

   Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware
   Interface Table (NFIT) sub-structure: "Flush Hint Address Structure".
   A flush hint is an mmio address that when written and fenced assures
   that all previous posted writes targeting a given dimm have been
   flushed to media.

 - On-demand ARS (address range scrub).

   Linux uses the results of the ACPI ARS commands to track bad blocks
   in pmem devices.  When latent errors are detected we re-scrub the
   media to refresh the bad block list, userspace can also request a
   re-scrub at any time.

 - Support for the Microsoft DSM (device specific method) command
   format.

 - Support for EDK2/OVMF virtual disk device memory ranges.

 - Various fixes and cleanups across the subsystem.

* tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits)
  libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register"
  nfit: do an ARS scrub on hitting a latent media error
  nfit: move to nfit/ sub-directory
  nfit, libnvdimm: allow an ARS scrub to be triggered on demand
  libnvdimm: register nvdimm_bus devices with an nd_bus driver
  pmem: clarify a debug print in pmem_clear_poison
  x86/insn: remove pcommit
  Revert "KVM: x86: add pcommit support"
  nfit, tools/testing/nvdimm/: unify shutdown paths
  libnvdimm: move -&gt;module to struct nvdimm_bus_descriptor
  nfit: cleanup acpi_nfit_init calling convention
  nfit: fix _FIT evaluation memory leak + use after free
  tools/testing/nvdimm: add manufacturing_{date|location} dimm properties
  tools/testing/nvdimm: add virtual ramdisk range
  acpi, nfit: treat virtual ramdisk SPA as pmem region
  pmem: kill __pmem address space
  pmem: kill wmb_pmem()
  libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes
  fs/dax: remove wmb_pmem()
  libnvdimm, pmem: flush posted-write queues on shutdown
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs</title>
<updated>2016-07-28T19:59:05+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2016-07-28T19:59:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=6784725ab0b9473ce44bfad91a256bd72b5cddc1'/>
<id>6784725ab0b9473ce44bfad91a256bd72b5cddc1</id>
<content type='text'>
Pull vfs updates from Al Viro:
 "Assorted cleanups and fixes.

  Probably the most interesting part long-term is -&gt;d_init() - that will
  have a bunch of followups in (at least) ceph and lustre, but we'll
  need to sort the barrier-related rules before it can get used for
  really non-trivial stuff.

  Another fun thing is the merge of -&gt;d_iput() callers (dentry_iput()
  and dentry_unlink_inode()) and a bunch of -&gt;d_compare() ones (all
  except the one in __d_lookup_lru())"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
  fs/dcache.c: avoid soft-lockup in dput()
  vfs: new d_init method
  vfs: Update lookup_dcache() comment
  bdev: get rid of -&gt;bd_inodes
  Remove last traces of -&gt;sync_page
  new helper: d_same_name()
  dentry_cmp(): use lockless_dereference() instead of smp_read_barrier_depends()
  vfs: clean up documentation
  vfs: document -&gt;d_real()
  vfs: merge .d_select_inode() into .d_real()
  unify dentry_iput() and dentry_unlink_inode()
  binfmt_misc: -&gt;s_root is not going anywhere
  drop redundant -&gt;owner initializations
  ufs: get rid of redundant checks
  orangefs: constify inode_operations
  missed comment updates from -&gt;direct_IO() prototype change
  file_inode(f)-&gt;i_mapping is f-&gt;f_mapping
  trim fsnotify hooks a bit
  9p: new helper - v9fs_parent_fid()
  debugfs: -&gt;d_parent is never NULL or negative
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull vfs updates from Al Viro:
 "Assorted cleanups and fixes.

  Probably the most interesting part long-term is -&gt;d_init() - that will
  have a bunch of followups in (at least) ceph and lustre, but we'll
  need to sort the barrier-related rules before it can get used for
  really non-trivial stuff.

  Another fun thing is the merge of -&gt;d_iput() callers (dentry_iput()
  and dentry_unlink_inode()) and a bunch of -&gt;d_compare() ones (all
  except the one in __d_lookup_lru())"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
  fs/dcache.c: avoid soft-lockup in dput()
  vfs: new d_init method
  vfs: Update lookup_dcache() comment
  bdev: get rid of -&gt;bd_inodes
  Remove last traces of -&gt;sync_page
  new helper: d_same_name()
  dentry_cmp(): use lockless_dereference() instead of smp_read_barrier_depends()
  vfs: clean up documentation
  vfs: document -&gt;d_real()
  vfs: merge .d_select_inode() into .d_real()
  unify dentry_iput() and dentry_unlink_inode()
  binfmt_misc: -&gt;s_root is not going anywhere
  drop redundant -&gt;owner initializations
  ufs: get rid of redundant checks
  orangefs: constify inode_operations
  missed comment updates from -&gt;direct_IO() prototype change
  file_inode(f)-&gt;i_mapping is f-&gt;f_mapping
  trim fsnotify hooks a bit
  9p: new helper - v9fs_parent_fid()
  debugfs: -&gt;d_parent is never NULL or negative
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>mm: introduce fault_env</title>
<updated>2016-07-26T23:19:19+00:00</updated>
<author>
<name>Kirill A. Shutemov</name>
<email>kirill.shutemov@linux.intel.com</email>
</author>
<published>2016-07-26T22:25:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=bae473a423f65e480db83c85b5e92254f6dfcb28'/>
<id>bae473a423f65e480db83c85b5e92254f6dfcb28</id>
<content type='text'>
The idea borrowed from Peter's patch from patchset on speculative page
faults[1]:

Instead of passing around the endless list of function arguments,
replace the lot with a single structure so we can change context without
endless function signature changes.

The changes are mostly mechanical with exception of faultaround code:
filemap_map_pages() got reworked a bit.

This patch is preparation for the next one.

[1] http://lkml.kernel.org/r/20141020222841.302891540@infradead.org

Link: http://lkml.kernel.org/r/1466021202-61880-9-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov &lt;kirill.shutemov@linux.intel.com&gt;
Acked-by: Peter Zijlstra (Intel) &lt;peterz@infradead.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The idea borrowed from Peter's patch from patchset on speculative page
faults[1]:

Instead of passing around the endless list of function arguments,
replace the lot with a single structure so we can change context without
endless function signature changes.

The changes are mostly mechanical with exception of faultaround code:
filemap_map_pages() got reworked a bit.

This patch is preparation for the next one.

[1] http://lkml.kernel.org/r/20141020222841.302891540@infradead.org

Link: http://lkml.kernel.org/r/1466021202-61880-9-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov &lt;kirill.shutemov@linux.intel.com&gt;
Acked-by: Peter Zijlstra (Intel) &lt;peterz@infradead.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mm: migrate: support non-lru movable page migration</title>
<updated>2016-07-26T23:19:19+00:00</updated>
<author>
<name>Minchan Kim</name>
<email>minchan@kernel.org</email>
</author>
<published>2016-07-26T22:23:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=bda807d4445414e8e77da704f116bb0880fe0c76'/>
<id>bda807d4445414e8e77da704f116bb0880fe0c76</id>
<content type='text'>
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages.  But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,.  enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.

So, this patch is to support facility to change non-movable pages with
movable.  For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.

If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.

1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);

What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully.  On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation.  If a driver cannot isolate the page, it should
return *false*.

Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.

2. int (*migratepage) (struct address_space *mapping,
		struct page *newpage, struct page *oldpage, enum migrate_mode);

After isolation, VM calls migratepage of driver with isolated page.  The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage.  Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0.  If driver cannot migrate the page at the
moment, driver can return -EAGAIN.  On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure".  On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.

Driver shouldn't touch page.lru field VM using in the functions.

3. void (*putback_page)(struct page *);

If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page.  In this function, driver should put the isolated page back to the
own data structure.

4. non-lru movable page flags

There are two page flags for supporting non-lru movable page.

* PG_movable

Driver should use the below function to make page movable under
page_lock.

	void __SetPageMovable(struct page *page, struct address_space *mapping)

It needs argument of address_space for registering migration family
functions which will be called by VM.  Exactly speaking, PG_movable is
not a real flag of struct page.  Rather than, VM reuses page-&gt;mapping's
lower bits to represent it.

	#define PAGE_MAPPING_MOVABLE 0x2
	page-&gt;mapping = page-&gt;mapping | PAGE_MAPPING_MOVABLE;

so driver shouldn't access page-&gt;mapping directly.  Instead, driver
should use page_mapping which mask off the low two bits of page-&gt;mapping
so it can get right struct address_space.

For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page-&gt;mapping field is unified with other variables in struct page.  As
well, if driver releases the page after isolation by VM, page-&gt;mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable).  But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated.  Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page-&gt;mapping.  It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.

For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page-&gt;mapping and
mapping-&gt;a_ops-&gt;isolate_page under lock_page.  The lock_page prevents
sudden destroying of page-&gt;mapping.

Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.

* PG_isolated

To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page.  So if a CPU encounters PG_isolated
non-lru movable page, it can skip it.  Driver doesn't need to manipulate
the flag because VM will set/clear it automatically.  Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field.  PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.

[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
  Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim &lt;gi-oh.kim@profitbricks.com&gt;
Signed-off-by: Minchan Kim &lt;minchan@kernel.org&gt;
Signed-off-by: Ganesh Mahendran &lt;opensource.ganesh@gmail.com&gt;
Acked-by: Vlastimil Babka &lt;vbabka@suse.cz&gt;
Cc: Sergey Senozhatsky &lt;sergey.senozhatsky@gmail.com&gt;
Cc: Rik van Riel &lt;riel@redhat.com&gt;
Cc: Joonsoo Kim &lt;iamjoonsoo.kim@lge.com&gt;
Cc: Mel Gorman &lt;mgorman@suse.de&gt;
Cc: Hugh Dickins &lt;hughd@google.com&gt;
Cc: Rafael Aquini &lt;aquini@redhat.com&gt;
Cc: Jonathan Corbet &lt;corbet@lwn.net&gt;
Cc: John Einar Reitan &lt;john.reitan@foss.arm.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages.  But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,.  enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.

So, this patch is to support facility to change non-movable pages with
movable.  For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.

If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.

1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);

What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully.  On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation.  If a driver cannot isolate the page, it should
return *false*.

Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.

2. int (*migratepage) (struct address_space *mapping,
		struct page *newpage, struct page *oldpage, enum migrate_mode);

After isolation, VM calls migratepage of driver with isolated page.  The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage.  Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0.  If driver cannot migrate the page at the
moment, driver can return -EAGAIN.  On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure".  On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.

Driver shouldn't touch page.lru field VM using in the functions.

3. void (*putback_page)(struct page *);

If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page.  In this function, driver should put the isolated page back to the
own data structure.

4. non-lru movable page flags

There are two page flags for supporting non-lru movable page.

* PG_movable

Driver should use the below function to make page movable under
page_lock.

	void __SetPageMovable(struct page *page, struct address_space *mapping)

It needs argument of address_space for registering migration family
functions which will be called by VM.  Exactly speaking, PG_movable is
not a real flag of struct page.  Rather than, VM reuses page-&gt;mapping's
lower bits to represent it.

	#define PAGE_MAPPING_MOVABLE 0x2
	page-&gt;mapping = page-&gt;mapping | PAGE_MAPPING_MOVABLE;

so driver shouldn't access page-&gt;mapping directly.  Instead, driver
should use page_mapping which mask off the low two bits of page-&gt;mapping
so it can get right struct address_space.

For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page-&gt;mapping field is unified with other variables in struct page.  As
well, if driver releases the page after isolation by VM, page-&gt;mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable).  But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated.  Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page-&gt;mapping.  It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.

For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page-&gt;mapping and
mapping-&gt;a_ops-&gt;isolate_page under lock_page.  The lock_page prevents
sudden destroying of page-&gt;mapping.

Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.

* PG_isolated

To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page.  So if a CPU encounters PG_isolated
non-lru movable page, it can skip it.  Driver doesn't need to manipulate
the flag because VM will set/clear it automatically.  Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field.  PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.

[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
  Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim &lt;gi-oh.kim@profitbricks.com&gt;
Signed-off-by: Minchan Kim &lt;minchan@kernel.org&gt;
Signed-off-by: Ganesh Mahendran &lt;opensource.ganesh@gmail.com&gt;
Acked-by: Vlastimil Babka &lt;vbabka@suse.cz&gt;
Cc: Sergey Senozhatsky &lt;sergey.senozhatsky@gmail.com&gt;
Cc: Rik van Riel &lt;riel@redhat.com&gt;
Cc: Joonsoo Kim &lt;iamjoonsoo.kim@lge.com&gt;
Cc: Mel Gorman &lt;mgorman@suse.de&gt;
Cc: Hugh Dickins &lt;hughd@google.com&gt;
Cc: Rafael Aquini &lt;aquini@redhat.com&gt;
Cc: Jonathan Corbet &lt;corbet@lwn.net&gt;
Cc: John Einar Reitan &lt;john.reitan@foss.arm.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>vfs: new d_init method</title>
<updated>2016-07-24T20:36:29+00:00</updated>
<author>
<name>Miklos Szeredi</name>
<email>mszeredi@redhat.com</email>
</author>
<published>2016-06-28T09:47:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=285b102d3b745f3c2c110c9c327741d87e64aacc'/>
<id>285b102d3b745f3c2c110c9c327741d87e64aacc</id>
<content type='text'>
Allow filesystem to initialize dentry at allocation time.

Signed-off-by: Miklos Szeredi &lt;mszeredi@redhat.com&gt;
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Allow filesystem to initialize dentry at allocation time.

Signed-off-by: Miklos Szeredi &lt;mszeredi@redhat.com&gt;
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>pmem: kill __pmem address space</title>
<updated>2016-07-13T02:25:38+00:00</updated>
<author>
<name>Dan Williams</name>
<email>dan.j.williams@intel.com</email>
</author>
<published>2016-06-04T01:06:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=7a9eb20666317794d0279843fbd091af93907780'/>
<id>7a9eb20666317794d0279843fbd091af93907780</id>
<content type='text'>
The __pmem address space was meant to annotate codepaths that touch
persistent memory and need to coordinate a call to wmb_pmem().  Now that
wmb_pmem() is gone, there is little need to keep this annotation.

Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Cc: Ross Zwisler &lt;ross.zwisler@linux.intel.com&gt;
Signed-off-by: Dan Williams &lt;dan.j.williams@intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The __pmem address space was meant to annotate codepaths that touch
persistent memory and need to coordinate a call to wmb_pmem().  Now that
wmb_pmem() is gone, there is little need to keep this annotation.

Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Cc: Ross Zwisler &lt;ross.zwisler@linux.intel.com&gt;
Signed-off-by: Dan Williams &lt;dan.j.williams@intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'd_real' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into work.misc</title>
<updated>2016-07-01T03:34:49+00:00</updated>
<author>
<name>Al Viro</name>
<email>viro@zeniv.linux.org.uk</email>
</author>
<published>2016-07-01T03:34:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=b223f4e215b32849b841e750e83a915b670070f5'/>
<id>b223f4e215b32849b841e750e83a915b670070f5</id>
<content type='text'>
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
</pre>
</div>
</content>
</entry>
<entry>
<title>Remove last traces of -&gt;sync_page</title>
<updated>2016-07-01T03:30:52+00:00</updated>
<author>
<name>Matthew Wilcox</name>
<email>matthew.r.wilcox@intel.com</email>
</author>
<published>2016-03-07T04:27:26+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=f4e6d844bdc142322905d137a9e44e07eee43c5c'/>
<id>f4e6d844bdc142322905d137a9e44e07eee43c5c</id>
<content type='text'>
Commit 7eaceaccab5f removed -&gt;sync_page, but a few mentions of it still
existed in documentation and comments,

Signed-off-by: Matthew Wilcox &lt;matthew.r.wilcox@intel.com&gt;
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit 7eaceaccab5f removed -&gt;sync_page, but a few mentions of it still
existed in documentation and comments,

Signed-off-by: Matthew Wilcox &lt;matthew.r.wilcox@intel.com&gt;
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>vfs: clean up documentation</title>
<updated>2016-06-30T06:53:28+00:00</updated>
<author>
<name>Miklos Szeredi</name>
<email>mszeredi@redhat.com</email>
</author>
<published>2016-06-30T06:53:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=0cac643c102c0632dc2cc81e2490b0fec1cac0af'/>
<id>0cac643c102c0632dc2cc81e2490b0fec1cac0af</id>
<content type='text'>
Signed-off-by: Miklos Szeredi &lt;mszeredi@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Miklos Szeredi &lt;mszeredi@redhat.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
