Pull SCSI fixes from James Bottomley:
 "Seven small fixes, six in drivers and one in sd.

  The sd fix is so large because it changes a struct pointer to a struct
  but otherwise is fairly simple"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: qcom-ufs: dt-bindings: Document the SM8650 UFS Controller
  scsi: sd: Fix sshdr use in sd_suspend_common()
  scsi: scsi_debug: Delete some bogus error checking
  scsi: scsi_debug: Fix some bugs in sdebug_error_write()
  scsi: ufs: core: Fix racing issue between ufshcd_mcq_abort() and ISR
  scsi: ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
  scsi: qla2xxx: Fix system crash due to bad pointer access

When moving the *-internal-delay-ps properties to only apply for RGMII
interface modes there where a typo in the text formatting.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull in queued fixes for 6.7

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull input updates from Dmitry Torokhov:

 - a number of input drivers has been converted to use facilities
   provided by the device core to instantiate driver-specific attributes
   instead of using devm_device_add_group() and similar APIs

 - platform input devices have been converted to use remove() callback
   returning void

 - a fix for use-after-free when tearing down a Synaptics RMI device

 - a few flexible arrays in input structures have been annotated with
   __counted_by to help hardening efforts

 - handling of vddio supply in cyttsp5 driver

 - other miscellaneous fixups

* tag 'input-for-v6.7-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits)
  Input: walkera0701 - use module_parport_driver macro to simplify the code
  Input: synaptics-rmi4 - fix use after free in rmi_unregister_function()
  dt-bindings: input: fsl,scu-key: Document wakeup-source
  Input: cyttsp5 - add handling for vddio regulator
  dt-bindings: input: cyttsp5: document vddio-supply
  Input: tegra-kbc - use device_get_match_data()
  Input: Annotate struct ff_device with __counted_by
  Input: axp20x-pek - avoid needless newline removal
  Input: mt - annotate struct input_mt with __counted_by
  Input: leds - annotate struct input_leds with __counted_by
  Input: evdev - annotate struct evdev_client with __counted_by
  Input: synaptics-rmi4 - replace deprecated strncpy
  Input: wm97xx-core - convert to platform remove callback returning void
  Input: wm831x-ts - convert to platform remove callback returning void
  Input: ti_am335x_tsc - convert to platform remove callback returning void
  Input: sun4i-ts - convert to platform remove callback returning void
  Input: stmpe-ts - convert to platform remove callback returning void
  Input: pcap_ts - convert to platform remove callback returning void
  Input: mc13783_ts - convert to platform remove callback returning void
  Input: mainstone-wm97xx - convert to platform remove callback returning void
  ...

Pull watchdog updates from Wim Van Sebroeck:

 - add support for Amlogic C3 and S4 SoCs

 - add IT8613 ID

 - add MSM8226 and MSM8974 compatibles

 - other small fixes and improvements

* tag 'linux-watchdog-6.7-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
  dt-bindings: watchdog: Add support for Amlogic C3 and S4 SoCs
  watchdog: mlx-wdt: Parameter desctiption warning fix
  watchdog: aspeed: Add support for aspeed,reset-mask DT property
  dt-bindings: watchdog: aspeed-wdt: Add aspeed,reset-mask property
  watchdog: apple: Deactivate on suspend
  dt-bindings: watchdog: qcom-wdt: Add MSM8226 and MSM8974 compatibles
  dt-bindings: watchdog: fsl-imx7ulp-wdt: Add 'fsl,ext-reset-output'
  wdog: imx7ulp: Enable wdog int_en bit for watchdog any reset
  drivers: watchdog: marvell_gti: Program the max_hw_heartbeat_ms
  drivers: watchdog: marvell_gti: fix zero pretimeout handling
  watchdog: marvell_gti: Replace of_platform.h with explicit includes
  watchdog: imx_sc_wdt: continue if the wdog already enabled
  watchdog: st_lpc: Use device_get_match_data()
  watchdog: wdat_wdt: Add timeout value as a param in ping method
  watchdog: gpio_wdt: Make use of device properties
  sbsa_gwdt: Calculate timeout with 64-bit math
  watchdog: ixp4xx: Make sure restart always works
  watchdog: it87_wdt: add IT8613 ID
  watchdog: marvell_gti_wdt: Fix error code in probe()
  Watchdog: marvell_gti_wdt: Remove redundant dev_err_probe() for platform_get_irq()
  ...

Pull pwm updates from Thierry Reding:
 "This contains a few fixes and a bunch of cleanups, a lot of which is
  in preparation for Uwe's character device support that may be ready in
  time for the next merge window"

* tag 'pwm/for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
  pwm: samsung: Document new member .channel in struct samsung_pwm_chip
  pwm: bcm2835: Add support for suspend/resume
  pwm: brcmstb: Checked clk_prepare_enable() return value
  pwm: brcmstb: Utilize appropriate clock APIs in suspend/resume
  pwm: pxa: Explicitly include correct DT includes
  pwm: cros-ec: Simplify using devm_pwmchip_add() and dev_err_probe()
  pwm: samsung: Consistently use the same name for driver data
  pwm: vt8500: Simplify using devm functions
  pwm: sprd: Simplify using devm_pwmchip_add() and dev_err_probe()
  pwm: sprd: Provide a helper to cast a chip to driver data
  pwm: spear: Simplify using devm functions
  pwm: mtk-disp: Simplify using devm_pwmchip_add()
  pwm: imx-tpm: Simplify using devm functions
  pwm: brcmstb: Simplify using devm functions
  pwm: bcm2835: Simplify using devm functions
  pwm: bcm-iproc: Simplify using devm functions
  pwm: Adapt sysfs API documentation to reality
  pwm: dwc: add PWM bit unset in get_state call
  pwm: dwc: make timer clock configurable
  pwm: dwc: split pci out of core driver
  ...

Pull iommu updates from Joerg Roedel:
 "Core changes:
   - Make default-domains mandatory for all IOMMU drivers
   - Remove group refcounting
   - Add generic_single_device_group() helper and consolidate drivers
   - Cleanup map/unmap ops
   - Scaling improvements for the IOVA rcache depot
   - Convert dart & iommufd to the new domain_alloc_paging()

  ARM-SMMU:
   - Device-tree binding update:
       - Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
   - SMMUv2:
       - Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
   - SMMUv3:
       - Large refactoring of the context descriptor code to move the CD
         table into the master, paving the way for '->set_dev_pasid()'
         support on non-SVA domains
   - Minor cleanups to the SVA code

  Intel VT-d:
   - Enable debugfs to dump domain attached to a pasid
   - Remove an unnecessary inline function

  AMD IOMMU:
   - Initial patches for SVA support (not complete yet)

  S390 IOMMU:
   - DMA-API conversion and optimized IOTLB flushing

  And some smaller fixes and improvements"

* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits)
  iommu/dart: Remove the force_bypass variable
  iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()
  iommu/dart: Convert to domain_alloc_paging()
  iommu/dart: Move the blocked domain support to a global static
  iommu/dart: Use static global identity domains
  iommufd: Convert to alloc_domain_paging()
  iommu/vt-d: Use ops->blocked_domain
  iommu/vt-d: Update the definition of the blocking domain
  iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
  Revert "iommu/vt-d: Remove unused function"
  iommu/amd: Remove DMA_FQ type from domain allocation path
  iommu: change iommu_map_sgtable to return signed values
  iommu/virtio: Add __counted_by for struct viommu_request and use struct_size()
  iommu/vt-d: debugfs: Support dumping a specified page table
  iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid}
  iommu/vt-d: debugfs: Dump entry pointing to huge page
  iommu/vt-d: Remove unused function
  iommu/arm-smmu-v3-sva: Remove bond refcount
  iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle
  iommu/arm-smmu-v3: Rename cdcfg to cd_table
  ...

Document the UFS Controller on the SM8650 Platform.

Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-bindings-ufs-v3-1-a96364463fd5@linaro.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull more drm updates from Dave Airlie:
 "Geert pointed out I missed the renesas reworks in my main pull, so
  this pull contains the renesas next work for atomic conversion and DT
  support.

  It also contains a bunch of amdgpu and some small ssd13xx fixes.

  renesas:
   - atomic conversion
   - DT support

  ssd13xx:
   - dt binding fix for ssd132x
   - Initialize ssd130x crtc_state to NULL.

  amdgpu:
   - Fix RAS support check
   - RAS fixes
   - MES fixes
   - SMU13 fixes
   - Contiguous memory allocation fix
   - BACO fixes
   - GPU reset fixes
   - Min power limit fixes
   - GFX11 fixes
   - USB4/TB hotplug fixes
   - ARM regression fix
   - GFX9.4.3 fixes
   - KASAN/KCSAN stack size check fixes
   - SR-IOV fixes
   - SMU14 fixes
   - PSP13 fixes
   - Display blend fixes
   - Flexible array size fixes

  amdkfd:
   - GPUVM fix

  radeon:
   - Flexible array size fixes"

* tag 'drm-next-2023-11-07' of git://anongit.freedesktop.org/drm/drm: (83 commits)
  drm/amd/display: Enable fast update on blendTF change
  drm/amd/display: Fix blend LUT programming
  drm/amd/display: Program plane color setting correctly
  drm/amdgpu: Query and report boot status
  drm/amdgpu: Add psp v13 function to query boot status
  drm/amd/swsmu: remove fw version check in sw_init.
  drm/amd/swsmu: update smu v14_0_0 driver if and metrics table
  drm/amdgpu: Add C2PMSG_109/126 reg field shift/masks
  drm/amdgpu: Optimize the asic type fix code
  drm/amdgpu: fix GRBM read timeout when do mes_self_test
  drm/amdgpu: check recovery status of xgmi hive in ras_reset_error_count
  drm/amd/pm: only check sriov vf flag once when creating hwmon sysfs
  drm/amdgpu: Attach eviction fence on alloc
  drm/amdkfd: Improve amdgpu_vm_handle_moved
  drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2
  drm/amd/display: Avoid NULL dereference of timing generator
  drm/amdkfd: Update cache info for GFX 9.4.3
  drm/amdkfd: Populate cache info for GFX 9.4.3
  drm/amdgpu: don't put MQDs in VRAM on ARM | ARM64
  drm/amdgpu/smu13: drop compute workload workaround
  ...

Pull remoteproc updates from Bjorn Andersson:
 "Support for controlling the second core in Mediatek's SCP dual-core
  setup is introduced.

  Support for audio, compute and modem DSPs on Qualcomm SM6375, and the
  audio DSP in SC7180 are introduced. The peripheral NoC clock is
  dropped from MSM8996 modem DSP, as this is handled through the
  interconnect provider.

  In the zynqmp driver the setup for TCM memory, and device address
  translation thereof, when operating in lockstep mode is corrected.

  A few bug fixes and cleanups are introduces across the ST and STM32
  remoteproc drivers"

* tag 'rproc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (28 commits)
  remoteproc: st: Fix sometimes uninitialized ret in st_rproc_probe()
  remoteproc: st: Use device_get_match_data()
  remoteproc: zynqmp: Change tcm address translation method
  remoteproc: mediatek: Refactor single core check and fix retrocompatibility
  remoteproc: qcom: q6v5-mss: Remove PNoC clock from 8996 MSS
  dt-bindings: remoteproc: qcom,msm8996-mss-pil: Remove PNoC clock
  dt-bindings: remoteproc: qcom,adsp: Remove AGGRE2 clock
  remoteproc: qcom: pas: Add SM6375 MPSS
  remoteproc: qcom: pas: Add SM6375 ADSP & CDSP
  dt-bindings: remoteproc: qcom,sm6375-pas: Document remoteprocs
  dt-bindings: remoteproc: pru: Add Interrupt property
  remoteproc: qcom: pas: Add sc7180 adsp
  dt-bindings: remoteproc: qcom: sc7180-pas: Add ADSP compatible
  arm64: dts: mediatek: Update the node name of SCP rpmsg subnode
  remoteproc: zynqmp: fix TCM carveouts in lockstep mode
  remoteproc: mediatek: Refine ipi handler error message
  remoteproc: mediatek: Report watchdog crash to all cores
  remoteproc: mediatek: Handle MT8195 SCP core 1 watchdog timeout
  remoteproc: mediatek: Setup MT8195 SCP core 1 SRAM offset
  remoteproc: mediatek: Remove dependency of MT8195 SCP L2TCM power control on dual-core SCP
  ...