Pull ARM SoC fixes from Arnd Bergmann:
 "These are the latest bug fixes that have come up in the soc tree. Most
  of these are fairly minor. Most notably, the majority of changes this
  time are not for dts files as usual.

   - Updates to the addresses of the broadcom and aspeed entries in the
     MAINTAINERS file.

   - Defconfig updates to address a regression on samsung and a build
     warning from an unknown Kconfig symbol

   - Build fixes for the StrongARM and Uniphier platforms

   - Code fixes for SCMI and FF-A firmware drivers, both of which had a
     simple bug that resulted in invalid data, and a lesser fix for the
     optee firmware driver

   - Multiple fixes for the recently added loongson/loongarch "guts" soc
     driver

   - Devicetree fixes for RISC-V on the startfive platform, addressing
     issues with NOR flash, usb and uart.

   - Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with
     clock, gpio, hdmi settings and the Makefile

   - Bug fixes for i.MX firmware code and the OCOTP soc driver

   - Multiple fixes for the TI sysc bus driver

   - Minor dts updates for TI omap dts files, to address boot time
     warnings and errors"

* tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
  MAINTAINERS: Fix Florian Fainelli's email address
  arm64: defconfig: enable syscon-poweroff driver
  ARM: locomo: fix locomolcd_power declaration
  soc: loongson: loongson2_guts: Remove unneeded semicolon
  soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource()
  soc: loongson: loongson_pm2: Populate children syscon nodes
  dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child
  soc: loongson: loongson_pm2: Drop useless of_device_id compatible
  dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible
  soc: loongson: loongson_pm2: Add dependency for INPUT
  arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y
  ARM: uniphier: fix cache kernel-doc warnings
  MAINTAINERS: aspeed: Update Andrew's email address
  MAINTAINERS: aspeed: Update git tree URL
  firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND
  arm64: dts: imx: Add imx8mm-prt8mm.dtb to build
  arm64: dts: imx8mm-evk: Fix hdmi@3d node
  soc: imx8m: Enable OCOTP clock for imx8mm before reading registers
  arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock
  arm64: dts: imx8mp: Fix SDMA2/3 clocks
  ...

Pull i2c fixes from Wolfram Sang:
 "Usual business: a driver fix, a DT fix, a minor core fix"

* tag 'i2c-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: npcm7xx: Fix callback completion ordering
  i2c: mux: Avoid potential false error message in i2c_mux_add_adapter
  dt-bindings: i2c: mxs: Pass ref and 'unevaluatedProperties: false'

Pull ATA fixes from Damien Le Moal:
 "A larger than usual set of fixes for 6.6-rc4 due to the unexpected
  number of fixes needed to address ATA disks suspend/resume issues.

  In more detail:

   - Add missing additionalProperties on child nodes to the pata-common
     DT bindings (Rob)

   - Fix handling of the REPORT SUPPORTED OPERATION CODES command to
     ignore reserved bits (Niklas)

   - Increase port multiplier soft reset timeout to accomodate slow
     devices and avoid issues on wakeup (Matthias)

   - A couple of minor code fixes to avoid compilation warnings in
     libata-core and libata-eh (me)

   - Many patches from me to address suspend/resume issues, and in
     particular a potential deadlock on resume due to the SCSI disk
     driver resume operation not being synchronized with libata EH port
     resume handling.

     This is addressed by changing the scsi disk driver disk start/stop
     control to allow libata to execute disk suspend (spin down) and
     resume (spin up) on its own during system suspend/resume. Runtime
     suspend/resume control remains with the SCSI disk driver.

     Other fixes include:
      - Fix libata power management request issuing to avoid races
      - Establish a link between ATA ports and SCSI devices to order PM
        operations
      - Fix device removal to avoid issues with driver rmmod removal
      - Fix synchronization of libata device rescan and SCSI disk resume
        operation
      - Remove libsas PM operations as suspend/resume is handled
        directly by the sas controller resume
      - Fix the SCSI disk driver to not issue commands to suspended
        disks, thus avoiding potential system lock-up on resume"

* tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  scsi: sd: Do not issue commands to suspended disks on shutdown
  ata: libata-core: Do not register PM operations for SAS ports
  ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  scsi: Do not attempt to rescan suspended devices
  ata: libata-scsi: Disable scsi device manage_system_start_stop
  scsi: sd: Differentiate system and runtime start/stop management
  ata: libata-scsi: link ata port and scsi device
  ata: libata-core: Fix port and device removal
  ata: libata-core: Fix ata_port_request_pm() locking
  ata: libata-sata: increase PMP SRST timeout to 10s
  ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
  dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes

Pull clk fixes from Stephen Boyd:
 "A bunch of clk driver fixes for issues found recently:

   - Fix the binding for versaclock3 that was introduced this merge
     window so we know what the values are for clk consumers

   - Fix a 64-bit division issue in the versaclock3 driver

   - Avoid breakage in the versaclock3 driver by rejiggering the enums
     used to layout clks

   - Fix the parent name of a clk in the Spreadtrum ums512 clk driver

   - Fix a suspend/resume issue in Skyworks Si521xx clk driver where
     regmap restoration fails because writes are wedged

   - Return zero from Tegra bpmp recalc_rate() implementation when an
     error occurs so we don't consider an error as a large rate"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: tegra: fix error return case for recalc_rate
  clk: si521xx: Fix regmap write accessor
  clk: si521xx: Use REGCACHE_FLAT instead of NONE
  clk: sprd: Fix thm_parents incorrect configuration
  clk: vc3: Make vc3_clk_mux enum values based on vc3_clk enum values
  clk: vc3: Fix output clock mapping
  clk: vc3: Fix 64 by 64 division
  dt-bindings: clock: versaclock3: Add description for #clock-cells property

The reboot and poweroff features are actually part of the Power
Management Unit system controller, thus allow them as its children,
instead of specifying as separate device nodes with syscon phandle.

Without it, the reboot/poweroff feature becomes unavailable.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The Loongson-2K series chips (ls2k0500/ls2k1000/ls2k2000) share the same
PM system controller, using ls2k0500 compatible as fallback for the
others.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The imx25, imx50, imx51 and imx53 SPIs are compatible with the imx35.

Document them accordingly.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230924183904.752415-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

The PATA child node schema is missing constraints to prevent unknown
properties. As none of the users of this common binding extend the child
nodes with additional properties, adding "additionalProperties: false"
here is sufficient.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

Running 'make dtbs_check DT_SCHEMA_FILES=i2c-mxs.yaml' throws
several schema warnings such as:

imx28-m28evk.dtb: i2c@80058000: '#address-cells', '#size-cells', 'codec@a', 'eeprom@51', 'rtc@68' do not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/i2c/i2c-mxs.yaml#

Fix these warnings by passing a reference to i2c-controller.yaml#
and using 'unevaluatedProperties: false' just like the yaml bindings
of other I2C controllers.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Add description for "#clock-cells" property to map indexes to the clock
output in the Table 3. ("Output Source") in the 5P35023 datasheet
(ie: {REF,SE1,SE2,SE3,DIFF1,DIFF2}. Also update the "assigned-clock-rates"
in the example.

While at it, replace clocks phandle in the example from x1_x2->x1 as
X2 is a different 32768 kHz crystal.

Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230824104812.147775-2-biju.das.jz@bp.renesas.com
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>