Pull more sound updates from Takashi Iwai:
 "A few more updates for 6.2: most of changes are about ASoC
  device-specific fixes.

   - Lots of ASoC Intel AVS extensions and refactoring

   - Quirks for ASoC Intel SOF as well as regression fixes

   - ASoC Mediatek and Rockchip fixes

   - Intel HD-audio HDMI workarounds

   - Usual HD- and USB-audio device-specific quirks"

* tag 'sound-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (54 commits)
  ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
  ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl()
  ASoC: lochnagar: Fix unused lochnagar_of_match warning
  ASoC: Intel: Add HP Stream 8 to bytcr_rt5640.c
  ASoC: SOF: mediatek: initialize panic_info to zero
  ASoC: rt5670: Remove unbalanced pm_runtime_put()
  ASoC: Intel: bytcr_rt5640: Add quirk for the Advantech MICA-071 tablet
  ASoC: Intel: soc-acpi: update codec addr on 0C11/0C4F product
  ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
  ASoC: wm8994: Fix potential deadlock
  ASoC: mediatek: mt8195: add sof be ops to check audio active
  ASoC: SOF: Revert: "core: unregister clients and machine drivers in .shutdown"
  ASoC: SOF: Intel: pci-tgl: unblock S5 entry if DMA stop has failed"
  ALSA: hda/hdmi: fix stream-id config keep-alive for rt suspend
  ALSA: hda/hdmi: set default audio parameters for KAE silent-stream
  ALSA: hda/hdmi: fix i915 silent stream programming flow
  ALSA: hda: Error out if invalid stream is being setup
  ASoC: dt-bindings: fsl-sai: Reinstate i.MX93 SAI compatible string
  ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated
  ASoC: codecs: wcd-clsh: Remove the unused function
  ...

Pull pwm updates from Thierry Reding:
 "Various changes across the board, mostly improvements and cleanups"

* tag 'pwm/for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (42 commits)
  pwm: pca9685: Convert to i2c's .probe_new()
  pwm: sun4i: Propagate errors in .get_state() to the caller
  pwm: Handle .get_state() failures
  pwm: sprd: Propagate errors in .get_state() to the caller
  pwm: rockchip: Propagate errors in .get_state() to the caller
  pwm: mtk-disp: Propagate errors in .get_state() to the caller
  pwm: imx27: Propagate errors in .get_state() to the caller
  pwm: cros-ec: Propagate errors in .get_state() to the caller
  pwm: crc: Propagate errors in .get_state() to the caller
  leds: qcom-lpg: Propagate errors in .get_state() to the caller
  drm/bridge: ti-sn65dsi86: Propagate errors in .get_state() to the caller
  pwm/tracing: Also record trace events for failed API calls
  pwm: Make .get_state() callback return an error code
  pwm: pxa: Enable for MMP platform
  pwm: pxa: Add reference manual link and limitations
  pwm: pxa: Use abrupt shutdown mode
  pwm: pxa: Remove clk enable/disable from pxa_pwm_config
  pwm: pxa: Set duty cycle to 0 when disabling PWM
  pwm: pxa: Remove pxa_pwm_enable/disable
  pwm: mediatek: Add support for MT7986
  ...

Pull remoteproc updates from Bjorn Andersson:
 "rproc-virtio device names are now auto generated, to avoid conflicts
  between remoteproc instances.

  The imx_rproc driver is extended with support for communicating with
  and attaching to a running M4 on i.MX8QXP, as well as support for
  attaching to the M4 after self-recovering from a crash. Support is
  added for i.MX8QM and mailbox channels are reconnected during the
  recovery process, in order to avoid data corruption.

  The Xilinx Zynqmp firmware interface is extended and support for the
  Xilinx R5 RPU is introduced.

  Various resources leaks, primarily in error paths, throughout the
  Qualcomm drivers are corrected.

  Lastly a fix to ensure that pm_relax is invoked even if the remoteproc
  instance is stopped between a crash is being reported and the recovery
  handler is scheduled"

* tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
  remoteproc: core: Do pm_relax when in RPROC_OFFLINE state
  remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()
  remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
  remoteproc: qcom_q6v5_pas: detach power domains on remove
  remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
  remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
  remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
  remoteproc: sysmon: Make QMI message rules const
  drivers: remoteproc: Add Xilinx r5 remoteproc driver
  firmware: xilinx: Add RPU configuration APIs
  firmware: xilinx: Add shutdown/wakeup APIs
  firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
  arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
  dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
  remoteproc: core: Use device_match_of_node()
  remoteproc: imx_rproc: Correct i.MX93 DRAM mapping
  remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP
  remoteproc: imx_rproc: Request mbox channel later
  remoteproc: imx_rproc: Support i.MX8QM
  remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP
  ...

Pull mailbox updates from Jassi Brar:

 - qcom: enable sc8280xp, sm8550 and sm4250 support

 - ti: default to ARCH_K3 for msg manager

 - mediatek:
    - add mt8188 and mt8186 support
    - request irq only after got ready

 - zynq-ipi: fix error handling after device_register

 - mpfs: check sys-con status

 - rockchip: simplify by using device_get_match_data

* tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: qcom-ipcc: Add compatible for SM8550
  mailbox: mtk-cmdq: Do not request irq until we are ready
  mailbox: zynq-ipi: fix error handling while device_register() fails
  mailbox: mtk-cmdq-mailbox: Use platform data directly instead of copying
  mailbox: arm_mhuv2: Fix return value check in mhuv2_probe()
  dt-bindings: mailbox: mediatek,gce-mailbox: add mt8188 compatible name
  dt-bindings: mailbox: add GCE header file for mt8188
  mailbox: mpfs: read the system controller's status
  mailbox: mtk-cmdq: add MT8186 support
  mailbox: mtk-cmdq: add gce ddr enable support flow
  mailbox: mtk-cmdq: add gce software ddr enable private data
  mailbox: mtk-cmdq: Use GCE_CTRL_BY_SW definition instead of number
  mailbox: rockchip: Use device_get_match_data() to simplify the code
  dt-bindings: mailbox: qcom-ipcc: Add sc8280xp compatible
  mailbox: config: ti-msgmgr: Default set to ARCH_K3 for TI msg manager
  mailbox: qcom-apcs-ipc: Add SM4250 APCS IPC support
  dt-bindings: mailbox: qcom: Add SM4250 APCS compatible

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for Ampere Computing SMpro
   - Add support for TI TPS65219 PMIC

  New Functionality:
   - Add support for multiple devices of the same type; rk808

  Fix-ups:
   - Convert a bunch of I2C class drivers over to .probe_new()
   - Remove superfluous includes; mc13xxx-*, palmas, timberdale
   - Use correct includes for GPIO handling; madera-core
   - Convert to GPIOD; twl6040
   - Remove unused platform data handling; twl6040
   - Device Tree changes; many
   - Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld
   - Add support for modules; palmas
   - Enable COMPILE_TEST support; intel_soc_pmic*
   - Trivial: spelling / whitespace fixes; mc13xxx-spi
   - Replace old PM helpers with new ones; many
   - Convert deprecated mask_invert usage to unmask_base; many
   - Use devm_*() calls; qcom_rpm
   - MAINTAINER fix-ups
   - Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc,
     stm32-lptimer, qcom_rpm, rohm-*

  Bug Fixes:
   - Add bounds / error checking; mt6360-core
   - No sleeping inside critical sections; axp20x
   - Fix missing dependencies; ROHM_BD957XMUF
   - Repair error paths; qcom-pm8008"

* tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits)
  dt-bindings: mfd: da9062: Correct file name for watchdog
  mfd: pm8008: Fix return value check in pm8008_probe()
  mfd: rohm: Use dev_err_probe()
  mfd: Drop obsolete dependencies on COMPILE_TEST
  dt-bindings: mfd: da9062: Move IRQ to optional properties
  mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code
  mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()
  mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource()
  mfd: rohm-bd9576: Convert to i2c's .probe_new()
  mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource()
  dt-bindings: Fix maintainer email for a few ROHM ICs
  mfd: palmas: Use device_get_match_data() to simplify the code
  Input: Add tps65219 interrupt driven powerbutton
  mfd: tps65219: Add driver for TI TPS65219 PMIC
  mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ
  mfd: wcd934x: Convert irq chip to config regs
  mfd: tps65090: Replace irqchip mask_invert with unmask_base
  mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base
  mfd: stpmic1: Fix swapped mask/unmask in irq chip
  mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base
  ...

Pull more devicetree updates from Rob Herring:
 "This is mostly a treewide clean-up from Krzysztof. There's also a
  couple of fixes and things that fell thru the cracks.

  I must say this has been a nice merge window without bindings dumped
  in at the last minute introducing warnings.

  Summary:

   - Treewide dropping of redundant 'binding' or 'schema' from schema
     titles. This will be followed up with a automated check to catch
     these.

   - Re-sort vendor-prefies

   - Convert GPIO based watchdog to schema

   - Handle all the variations for clocks, resets, power domains in i.MX
     PCIe binding

   - Document missing 'power-domains' property in mxsfb

   - Fix error with path references in Tegra XUSB example

   - Honor CONFIG_CMDLINE* even without /chosen node"

* tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: drop redundant part of title (manual)
  dt-bindings: clock: drop redundant part of title
  dt-bindings: drop redundant part of title (beginning)
  dt-bindings: drop redundant part of title (end, part three)
  dt-bindings: drop redundant part of title (end, part two)
  dt-bindings: drop redundant part of title (end)
  dt-bindings: clock: st,stm32mp1-rcc: add proper title
  dt-bindings: memory-controllers: ti,gpmc-child: drop redundant part of title
  dt-bindings: drop redundant part of title of shared bindings
  dt-bindings: watchdog: gpio: Convert bindings to YAML
  dt-bindings: imx6q-pcie: Handle more resets on legacy platforms
  dt-bindings: imx6q-pcie: Handle various PD configurations
  dt-bindings: imx6q-pcie: Handle various clock configurations
  dt-bindings: hwmon: ntc-thermistor: drop Naveen Krishna Chatradhi from maintainers
  dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property
  dt-bindings: vendor-prefixes: sort entries alphabetically
  dt-bindings: usb: tegra-xusb: Remove path references
  of: fdt: Honor CONFIG_CMDLINE* even without /chosen node

Pull RTC updates from Alexandre Belloni:
 "Most of the changes are a rework of the cmos driver by Rafael and
  fixes for issues found using static checkers. The removal of a driver
  leads to a reduction of the number of LOC of the subsystem.

  Removed driver:
   - davinci

  Updates:
   - convert i2c drivers to .probe_new
   - fix spelling mistakes and duplicated words in comments
   - cmos: rework wake setup and ACPI event handling
   - cros-ec: Limit RTC alarm range to fix alarmtimer
   - ds1347: fix century register handling
   - efi: wakeup support
   - isl12022: temperature sensor support
   - pcf85063: fix read_alarm and clkout
   - pcf8523: use stop bit to detect invalid time
   - pcf8563: use RTC_FEATURE_ALARM
   - snvs: be more flexible on LPSRT reads
   - many static checker fixes"

* tag 'rtc-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (48 commits)
  rtc: ds1742: use devm_platform_get_and_ioremap_resource()
  rtc: mxc_v2: Add missing clk_disable_unprepare()
  rtc: rs5c313: correct some spelling mistakes
  rtc: at91rm9200: Fix syntax errors in comments
  rtc: remove duplicated words in comments
  rtc: rv3028: Use IRQ flags obtained from device tree if available
  rtc: ds1307: use sysfs_emit() to instead of scnprintf()
  rtc: isl12026: drop obsolete dependency on COMPILE_TEST
  dt-bindings: rtc: m41t80: Convert text schema to YAML one
  rtc: pcf85063: fix pcf85063_clkout_control
  rtc: rx6110: fix warning with !OF
  rtc: rk808: reduce 'struct rk808' usage
  rtc: msc313: Fix function prototype mismatch in msc313_rtc_probe()
  dt-bindings: rtc: convert rtc-meson.txt to dt-schema
  rtc: pic32: Move devm_rtc_allocate_device earlier in pic32_rtc_probe()
  rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe()
  rtc: pcf85063: Fix reading alarm
  rtc: pcf8523: fix for stop bit
  rtc: efi: Add wakeup support
  rtc: pcf8563: clear RTC_FEATURE_ALARM if no irq
  ...

Pull dmaengine updates from Vinod Koul:
 "New support:

    - Qualcomm SDM670, SM6115 and SM6375 GPI controller support

    - Ingenic JZ4755 dmaengine support

    - Removal of iop-adma driver

  Updates:

   - Tegra support for dma-channel-mask

   - at_hdmac cleanup and virt-chan support for this driver"

* tag 'dmaengine-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (46 commits)
  dmaengine: Revert "dmaengine: remove s3c24xx driver"
  dmaengine: tegra: Add support for dma-channel-mask
  dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA
  dmaengine: idxd: Remove linux/msi.h include
  dt-bindings: dmaengine: qcom: gpi: add compatible for SM6375
  dmaengine: idxd: Fix crc_val field for completion record
  dmaengine: at_hdmac: Convert driver to use virt-dma
  dmaengine: at_hdmac: Remove unused member of at_dma_chan
  dmaengine: at_hdmac: Rename "chan_common" to "dma_chan"
  dmaengine: at_hdmac: Rename "dma_common" to "dma_device"
  dmaengine: at_hdmac: Use bitfield access macros
  dmaengine: at_hdmac: Keep register definitions and structures private to at_hdmac.c
  dmaengine: at_hdmac: Set include entries in alphabetic order
  dmaengine: at_hdmac: Use pm_ptr()
  dmaengine: at_hdmac: Use devm_clk_get()
  dmaengine: at_hdmac: Use devm_platform_ioremap_resource
  dmaengine: at_hdmac: Use devm_kzalloc() and struct_size()
  dmaengine: at_hdmac: Introduce atc_get_llis_residue()
  dmaengine: at_hdmac: s/atc_get_bytes_left/atc_get_residue
  dmaengine: at_hdmac: Pass residue by address to avoid unnecessary implicit casts
  ...

Pull soundwire updates from Vinod Koul:
 "This include bunch of Intel driver code reorganization and support for
  qcom v1.7.0 controller:

   - intel: reorganization of hw_ops callbacks, splitting files etc

   - qcom: support for v1.7.0 qcom controllers"

* tag 'soundwire-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: intel: split auxdevice to different file
  soundwire: intel: add in-band wake callbacks in hw_ops
  soundwire: intel: add link power management callbacks in hw_ops
  soundwire: intel: add bus management callbacks in hw_ops
  soundwire: intel: add register_dai callback in hw_ops
  soundwire: intel: add debugfs callbacks in hw_ops
  soundwire: intel: start using hw_ops
  dt-bindings: soundwire: Convert text bindings to DT Schema
  soundwire: cadence: use dai_runtime_array instead of dma_data
  soundwire: cadence: rename sdw_cdns_dai_dma_data as sdw_cdns_dai_runtime
  soundwire: qcom: add support for v1.7 Soundwire Controller
  dt-bindings: soundwire: qcom: add v1.7.0 support
  soundwire: qcom: make reset optional for v1.6 controller
  soundwire: qcom: remove unused SWRM_SPECIAL_CMD_ID
  soundwire: dmi-quirks: add quirk variant for LAPBC710 NUC15

Pull phy updates from Vinod Koul:
 "This tme we have again a big pile of qcom-qmp-* changes, one new
  driver and bunch of new hardware support.

  New hardware support:

   - Allwinner H616 USB PHY and A100 DPHY support

   - TI J721s2, J784s4 and J721e support

   - Freescale i.MX8MP PCIe PHY support

   - New driver for Renesas Ethernet SERDES supporting R-Car S4-8

   - Qualcomm SM8450 PCIe1 PHY support in EP mode

   - Qualcomm SC8280XP PCIe PHY support (including x4 mode)

   - Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings

  Updates:

   - A big pile of updates on qcom-qmp-* drivers following the driver
     split and reorganization merged earlier

   - Phy order of API calls documentation update"

* tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (174 commits)
  phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support
  dt-bindings: phy-j721e-wiz: add j721s2 compatible string
  phy: use devm_platform_get_and_ioremap_resource()
  phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant
  phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook
  phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last
  phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional
  dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant
  dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property
  phy: qcom-qmp-pcie: drop redundant clock allocation
  phy: qcom-qmp-usb: drop redundant clock allocation
  phy: qcom-qmp: drop unused type header
  phy: qcom-qmp-usb: drop sc8280xp reference-clock source
  dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source
  phy: qcom-qmp-combo: add support for updated sc8280xp binding
  phy: qcom-qmp-combo: rename DP_PHY register pointer
  phy: qcom-qmp-combo: rename common-register pointers
  phy: qcom-qmp-combo: clean up DP clock callbacks
  phy: qcom-qmp-combo: separate clock and provider registration
  phy: qcom-qmp-combo: add clock registration helper
  ...