Pull i2c updates from Wolfram Sang:
 "I2C has quite some patches for you this time. I hope it is the move to
  per-driver-maintainers which is now showing results. We will see.

  The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI),
  larger refactoring of the Designware, Tegra, and PXA drivers, the
  Cadence driver supports being a slave now, and there is support to
  instanciate SPD eeproms for well-known cases (which will be
  user-visible because the i801 driver supports it), and some
  devm_platform_ioremap_resource() conversions which blow up the
  diffstat.

  Note that I applied the Nuvoton driver quite late, so some minor fixup
  patches arrived during the merge window. I chose to apply them right
  away because they were trivial"

* 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits)
  i2c: Drop stray comma in MODULE_AUTHOR statements
  i2c: npcm7xx: npcm_i2caddr[] can be static
  MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC
  i2c: npcm7xx: Fix a couple of error codes in probe
  i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n
  i2c: npcm7xx: Remove unnecessary parentheses
  i2c: npcm7xx: Add support for slave mode for Nuvoton
  i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver
  dt-bindings: i2c: npcm7xx: add NPCM I2C controller
  i2c: pxa: don't error out if there's no pinctrl
  i2c: add 'single-master' property to generic bindings
  i2c: designware: Add Baikal-T1 System I2C support
  i2c: designware: Move reg-space remapping into a dedicated function
  i2c: designware: Retrieve quirk flags as early as possible
  i2c: designware: Convert driver to using regmap API
  i2c: designware: Discard Cherry Trail model flag
  i2c: designware: Add Baytrail sem config DW I2C platform dependency
  i2c: designware: slave: Set DW I2C core module dependency
  i2c: designware: Use `-y` to build multi-object modules
  dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller
  ...

Pull thermal updates from Daniel Lezcano:

 - Add the hwmon support on the i.MX SC (Anson Huang)

 - Thermal framework cleanups (self-encapsulation, pointless stubs,
   private structures) (Daniel Lezcano)

 - Use the PM QoS frequency changes for the devfreq cooling device
   (Matthias Kaehlcke)

 - Remove duplicate error messages from platform_get_irq() error
   handling (Markus Elfring)

 - Add support for the bandgap sensors (Keerthy)

 - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz)

 - Add Renesas R-Car maintainer entry (Niklas Söderlund)

 - Fix error checking after calling ti_bandgap_get_sensor_data() for the
   TI SoC thermal (Sudip Mukherjee)

 - Add latency constraint for the idle injection, the DT binding and the
   change the registering function (Daniel Lezcano)

 - Convert the thermal framework binding to the Yaml schema (Amit
   Kucheria)

 - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A.
   R. Silva)

 - Thermal framework cleanups (alphabetic order for heads, replace
   module.h by export.h, make file naming consistent) (Amit Kucheria)

 - Merge tsens-common into the tsens driver (Amit Kucheria)

 - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven)

 - Clean up the rcar_thermal_update_temp() function in the rcar thermal
   driver (Niklas Söderlund)

 - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian
   Tang)

 - Export GDDV, OEM vendor variables, and don't require IDSP for the
   int340x thermal driver - trivial conflicts fixed (Matthew Garrett)

* tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (48 commits)
  thermal/int340x_thermal: Don't require IDSP to exist
  thermal/int340x_thermal: Export OEM vendor variables
  thermal/int340x_thermal: Export GDDV
  thermal: qoriq: Update the settings for TMUv2
  thermal: rcar_thermal: Clean up rcar_thermal_update_temp()
  thermal: qoriq: Add platform dependencies
  drivers: thermal: tsens: Merge tsens-common.c into tsens.c
  thermal/of: Rename of-thermal.c
  thermal/governors: Prefix all source files with gov_
  thermal/drivers/user_space: Sort headers alphabetically
  thermal/drivers/of-thermal: Sort headers alphabetically
  thermal/drivers/cpufreq_cooling: Replace module.h with export.h
  thermal/drivers/cpufreq_cooling: Sort headers alphabetically
  thermal/drivers/clock_cooling: Include export.h
  thermal/drivers/clock_cooling: Sort headers alphabetically
  thermal/drivers/thermal_hwmon: Include export.h
  thermal/drivers/thermal_hwmon: Sort headers alphabetically
  thermal/drivers/thermal_helpers: Include export.h
  thermal/drivers/thermal_helpers: Sort headers alphabetically
  thermal/core: Replace module.h with export.h
  ...

Pull pwm updates from Thierry Reding:
 "Nothing too exciting for this cycle. A couple of fixes across the
  board, and Lee volunteered to help with patch review"

* tag 'pwm/for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Add missing "CONFIG_" prefix
  MAINTAINERS: Add Lee Jones as reviewer for the PWM subsystem
  pwm: imx27: Fix rounding behavior
  pwm: rockchip: Simplify rockchip_pwm_get_state()
  pwm: img: Call pm_runtime_put() in pm_runtime_get_sync() failed case
  pwm: tegra: Support dynamic clock frequency configuration
  pwm: jz4740: Add support for the JZ4725B
  pwm: jz4740: Make PWM start with the active part
  pwm: jz4740: Enhance precision in calculation of duty cycle
  pwm: jz4740: Drop dependency on MACH_INGENIC
  pwm: lpss: Fix get_state runtime-pm reference handling
  pwm: sun4i: Support direct clock output on Allwinner A64
  pwm: Add support for Azoteq IQS620A PWM generator
  dt-bindings: pwm: rcar: add r8a77961 support
  pwm: Add missing '\n' in log messages

There's no need to specify 'maxItems' with the same value as the number
of entries in 'items'. A meta-schema update will catch future cases.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-pwm@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The examples template is a 'simple-bus' with a size of 1 cell for
had between 2 and 4 cells which really only errors on I2C or SPI type
devices with a single cell.

The easiest fix in most cases is to change the 'reg' property to 1 cell
for address and size.

Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: linux-rockchip@lists.infradead.org
Cc: linux-media@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: netdev@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

The QCom QMP PHY bindings have child nodes with translatable (MMIO)
addresses, so a 'ranges' property is required in the parent node.
Additionally, the examples default to 1 address and size cell, so let's
fix that, too.

Fixes: ccf51c1cedfd ("dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml")
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

Another round of 'allOf' removals that came in this cycle.

json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.

Signed-off-by: Rob Herring <robh@kernel.org>

Pull mailbox updates from Jassi Brar:
 "qcom:
   - new controller driver for IPCC
   - reorg the of_device data
   - add support for ipq6018 platform

  spreadtrum:
   - new sprd controller driver

  imx:
   - implement suspend/resume PM support

  misc:
   - make pcc driver struct static
   - fix return value in imx_mu_scu
   - disable clock before bailout in imx probe
   - remove duplicate error mssg in zynqmp probe
   - fix header size in imx.scu
   - check for null instead of is-err in zynqmp"

* tag 'mailbox-v5.8' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: qcom: Add ipq6018 apcs compatible
  mailbox: qcom: Add clock driver name in apcs mailbox driver data
  dt-bindings: mailbox: Add YAML schemas for QCOM APCS global block
  mailbox: imx: ONLY IPC MU needs IRQF_NO_SUSPEND flag
  mailbox: imx: Add runtime PM callback to handle MU clocks
  mailbox: imx: Add context save/restore for suspend/resume
  MAINTAINERS: Add entry for Qualcomm IPCC driver
  mailbox: Add support for Qualcomm IPCC
  dt-bindings: mailbox: Add devicetree binding for Qcom IPCC
  mailbox: zynqmp-ipi: Fix NULL vs IS_ERR() check in zynqmp_ipi_mbox_probe()
  mailbox: imx-mailbox: fix scu msg header size check
  mailbox: sprd: Add Spreadtrum mailbox driver
  dt-bindings: mailbox: Add the Spreadtrum mailbox documentation
  mailbox: ZynqMP IPI: Delete an error message in zynqmp_ipi_probe()
  mailbox: imx: Disable the clock on devm_mbox_controller_register() failure
  mailbox: imx: Fix return in imx_mu_scu_xlate()
  mailbox: imx: Support runtime PM
  mailbox: pcc: make pcc_mbox_driver static

Pull sound fixes from Takashi Iwai:
 "Here are last-minute fixes gathered before merge window close; a few
  fixes are for the core while the rest majority are driver fixes.

   - PCM locking annotation fixes and the possible self-lock fix

   - ASoC DPCM regression fixes with multi-CPU DAI

   - A fix for inconsistent resume from system-PM on USB-audio

   - Improved runtime-PM handling with multiple USB interfaces

   - Quirks for HD-audio and USB-audio

   - Hardened firmware handling in max98390 codec

   - A couple of fixes for meson"

* tag 'sound-fix-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
  ASoC: rt5645: Add platform-data for Asus T101HA
  ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT10-A tablet
  ASoC: SOF: nocodec: conditionally set dpcm_capture/dpcm_playback flags
  ASoC: Intel: boards: replace capture_only by dpcm_capture
  ASoC: core: only convert non DPCM link to DPCM link
  ASoC: soc-pcm: dpcm: fix playback/capture checks
  ASoC: meson: add missing free_irq() in error path
  ALSA: pcm: disallow linking stream to itself
  ALSA: usb-audio: Manage auto-pm of all bundled interfaces
  ALSA: hda/realtek - add a pintbl quirk for several Lenovo machines
  ALSA: pcm: fix snd_pcm_link() lockdep splat
  ALSA: usb-audio: Use the new macro for HP Dock rename quirks
  ALSA: usb-audio: Add vendor, product and profile name for HP Thunderbolt Dock
  ALSA: emu10k1: delete an unnecessary condition
  dt-bindings: ASoc: Fix tdm-slot documentation spelling error
  ASoC: meson: fix memory leak of links if allocation of ldata fails
  ALSA: usb-audio: Fix inconsistent card PM state after resume
  ASoC: max98390: Fix potential crash during param fw loading
  ASoC: max98390: Fix incorrect printf qualifier
  ASoC: fsl-asoc-card: Defer probe when fail to find codec device
  ...

Pull more power management updates from Rafael Wysocki:
 "These are operating performance points (OPP) framework updates mostly,
  including support for interconnect bandwidth in the OPP core, plus a
  few cpufreq changes, including boost support in the CPPC cpufreq
  driver, an ACPI device power management fix and a hibernation code
  cleanup.

  Specifics:

   - Add support for interconnect bandwidth to the OPP core (Georgi
     Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar).

   - Add support for regulator enable/disable to the OPP core (Kamil
     Konieczny).

   - Add boost support to the CPPC cpufreq driver (Xiongfeng Wang).

   - Make the tegra186 cpufreq driver set the
     CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab).

   - Prevent the ACPI power management from using power resources with
     devices where the list of power resources for power state D0 (full
     power) is missing (Rafael Wysocki).

   - Annotate a hibernation-related function with __init (Christophe
     JAILLET)"

* tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PM: Avoid using power resources if there are none for D0
  cpufreq: CPPC: add SW BOOST support
  cpufreq: change '.set_boost' to act on one policy
  PM: hibernate: Add __init annotation to swsusp_header_init()
  opp: Don't parse icc paths unnecessarily
  opp: Remove bandwidth votes when target_freq is zero
  opp: core: add regulators enable and disable
  opp: Reorder the code for !target_freq case
  opp: Expose bandwidth information via debugfs
  cpufreq: dt: Add support for interconnect bandwidth scaling
  opp: Update the bandwidth on OPP frequency changes
  opp: Add sanity checks in _read_opp_key()
  opp: Add support for parsing interconnect bandwidth
  cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
  OPP: Add helpers for reading the binding properties
  dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings