Pull RISC-V updates from Paul Walmsley:
 "A few minor RISC-V updates for v5.3-rc4:

   - Remove __udivdi3() from the 32-bit Linux port, converting the only
     upstream user to use do_div(), per Linux policy

   - Convert the RISC-V standard clocksource away from per-cpu data
     structures, since only one is used by Linux, even on a multi-CPU
     system

   - A set of DT binding updates that remove an obsolete text binding in
     favor of a YAML binding, fix a bogus compatible string in the
     schema (thus fixing a "make dtbs_check" warning), and clarifies the
     future values expected in one of the RISC-V CPU properties"

* tag 'riscv/for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board
  dt-bindings: riscv: remove obsolete cpus.txt
  RISC-V: Remove udivdi3
  riscv: delay: use do_div() instead of __udivdi3()
  dt-bindings: Update the riscv,isa string description
  RISC-V: Remove per cpu clocksource

The YAML binding document for SiFive boards has an incorrect
compatible string for the HiFive Unleashed board.  Change it to match
the name of the board on the SiFive web site:

   https://www.sifive.com/boards/hifive-unleashed

which also matches the contents of the board DT data file:

   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts#n13

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Acked-by: Rob Herring <robh@kernel.org>

Remove the now-obsolete riscv/cpus.txt DT binding document, since we
are using YAML binding documentation instead.

While doing so, transfer the explanatory text about 'harts' (with some
edits) into the YAML file, at Rob's request.

Link: https://lore.kernel.org/linux-riscv/CAL_JsqJs6MtvmuyAknsUxQymbmoV=G+=JfS1PQj9kNHV7fjC9g@mail.gmail.com/
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>

Since the RISC-V specification states that ISA description strings are
case-insensitive, there's no functional difference between mixed-case,
upper-case, and lower-case ISA strings. Thus, to simplify parsing,
specify that the letters present in "riscv,isa" must be all lowercase.

Suggested-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

Pull spi fixes from Mark Brown:
 "A bunch of small, device specific things here plus a DT bindings fix
  for the new validatable YAML binding format.

  The most notable thing is the fix for GPIO chip selects which fixes a
  corner case in updates of that code to modern APIs, unfortunately due
  to a historical mess the code around GPIO support is obscure, fragile
  and an ABI which makes and attempt to improve the situation painful"

* tag 'spi-fix-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: pxa2xx: Add support for Intel Tiger Lake
  spi: bcm2835: Fix 3-wire mode if DMA is enabled
  spi: pxa2xx: Balance runtime PM enable/disable on error
  spi: gpio: Add SPI_MASTER_GPIO_SS flag
  spi: spi-fsl-qspi: change i.MX7D RX FIFO size
  spi: dt-bindings: spi-controller: remove unnecessary 'maxItems: 1' from reg

Pull USB fixes from Greg KH:
 "Here are some small fixes for 5.3-rc2. All of these resolve some
  reported issues, some more than others :)

  Included in here is:

   - xhci fix for an annoying issue with odd devices

   - reversion of some usb251xb patches that should not have been merged

   - usb pci quirk additions and fixups

   - usb storage fix

   - usb host controller error test fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT).
  usb: usb251xb: Reallow swap-dx-lanes to apply to the upstream port
  Revert "usb: usb251xb: Add US port lanes inversion property"
  Revert "usb: usb251xb: Add US lanes inversion dts-bindings"
  usb: wusbcore: fix unbalanced get/put cluster_id
  usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem()
  usb-storage: Add a limitation for blk_queue_max_hw_sectors()
  usb: pci-quirks: Minor cleanup for AMD PLL quirk
  usb: pci-quirks: Correct AMD PLL quirk detection

Pull Devicetree fixes from Rob Herring:
 "The nvmem changes would typically go thru Greg's tree, but they were
  missed in the merge window. [ Acked by Greg ]

  Summary:

   - Fix mismatches in $id values and actual filenames. Now checked by
     tools.

   - Convert nvmem binding to DT schema

   - Fix a typo in of_property_read_bool() kerneldoc

   - Remove some redundant description in al-fic interrupt-controller"

* tag 'devicetree-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Fix more $id value mismatches filenames
  dt-bindings: nvmem: SID: Fix the examples node names
  dt-bindings: nvmem: Add YAML schemas for the generic NVMEM bindings
  of: Fix typo in kerneldoc
  dt-bindings: interrupt-controller: al-fic: remove redundant binding
  dt-bindings: clk: allwinner,sun4i-a10-ccu: Correct path in $id

The path in the schema '$id' values are wrong. Fix them.

Signed-off-by: Rob Herring <robh@kernel.org>

Now that the examples are validated, the examples in the SID binding
generates an error since the node names aren't one of the valid ones.

Let's switch for one that is ok.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The nvmem providers and consumers have a bunch of generic properties that
are needed in a device tree. Add a YAML schemas for those.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
[Srini: Changed licence to (GPL-2.0 OR BSD-2-Clause)]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>