linux.git/Documentation/devicetree, branch v4.9-rc2 Linux kernel source tree Merge tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi 2016-10-23T22:56:23+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-10-23T22:56:23+00:00 5766e9d25f41d79a0bb99e44a4408d00236dc3c7 Pull IPMI updates from Corey Minyard: "A small bug fix and a new driver for acting as an IPMI device. I was on vacation during the merge window (a long vacation) but this is a bug fix that should go in and a new driver that shouldn't hurt anything. This has been in linux-next for a month or so" * tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: fix crash on reading version from proc after unregisted bmc ipmi/bt-bmc: remove redundant return value check of platform_get_resource() ipmi/bt-bmc: add a dependency on ARCH_ASPEED ipmi: Fix ioremap error handling in bt-bmc ipmi: add an Aspeed BT IPMI BMC driver 
Pull IPMI updates from Corey Minyard:
 "A small bug fix and a new driver for acting as an IPMI device.

  I was on vacation during the merge window (a long vacation) but this
  is a bug fix that should go in and a new driver that shouldn't hurt
  anything.

  This has been in linux-next for a month or so"

* tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: fix crash on reading version from proc after unregisted bmc
  ipmi/bt-bmc: remove redundant return value check of platform_get_resource()
  ipmi/bt-bmc: add a dependency on ARCH_ASPEED
  ipmi: Fix ioremap error handling in bt-bmc
  ipmi: add an Aspeed BT IPMI BMC driver
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2016-10-22T17:23:15+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-10-22T17:23:15+00:00 0c2b6dc4fd4fa13796b319aae969a009f03222c6 Pull timer updates from Thomas Gleixner: "This updates contains: - A revert which addresses a boot failure on ARM Sun5i platforms - A new clocksource driver, which has been delayed beyond rc1 due to an interrupt driver issue which was unearthed by this driver. The debugging of that issue and the discussion about the proper solution made this driver miss the merge window. There is no point in delaying it for a full cycle as it completes the basic mainline support for the new JCore platform and does not create any risk outside of that platform" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init" clocksource: Add J-Core timer/clocksource driver of: Add J-Core timer bindings 
Pull timer updates from Thomas Gleixner:
 "This updates contains:

   - A revert which addresses a boot failure on ARM Sun5i platforms

   - A new clocksource driver, which has been delayed beyond rc1 due to
     an interrupt driver issue which was unearthed by this driver. The
     debugging of that issue and the discussion about the proper
     solution made this driver miss the merge window. There is no point
     in delaying it for a full cycle as it completes the basic mainline
     support for the new JCore platform and does not create any risk
     outside of that platform"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init"
  clocksource: Add J-Core timer/clocksource driver
  of: Add J-Core timer bindings
of: Add J-Core timer bindings 2016-10-20T18:10:17+00:00 Rich Felker dalias@libc.org 2016-10-13T21:51:06+00:00 a2ce092be34c4951e23104a0bfdec08f9577fada Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Link: http://lkml.kernel.org/r/8b107c292ed8cf8eed0fa283071fc8a930098628.1476393790.git.dalias@libc.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 
Signed-off-by: Rich Felker <dalias@libc.org>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Link: http://lkml.kernel.org/r/8b107c292ed8cf8eed0fa283071fc8a930098628.1476393790.git.dalias@libc.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
pinctrl: aspeed-g5: Fix pin association of SPI1 function 2016-10-18T12:36:12+00:00 Andrew Jeffery andrew@aj.id.au 2016-09-27T14:50:16+00:00 8eb37aff76f4d97db39e62a838cd37c4d341d673 The SPI1 function was associated with the wrong pins: The functions that those pins provide is either an SPI debug or passthrough function coupled to SPI1. Make the SPI1 mux function configure the relevant pins and associate new SPI1DEBUG and SPI1PASSTHRU functions with the pins that were already defined. The notation used in the datasheet's multi-function pin table for the SoC is often creative: in this case the SYS* signals are enabled by a single bit, which is nothing unusual on its own, but in this case the bit was also participating in a multi-bit bitfield and therefore represented multiple functions. This fact was overlooked in the original patch. Fixes: 56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver) Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The SPI1 function was associated with the wrong pins: The functions that
those pins provide is either an SPI debug or passthrough function
coupled to SPI1. Make the SPI1 mux function configure the relevant pins
and associate new SPI1DEBUG and SPI1PASSTHRU functions with the pins
that were already defined.

The notation used in the datasheet's multi-function pin table for the SoC is
often creative: in this case the SYS* signals are enabled by a single bit,
which is nothing unusual on its own, but in this case the bit was also
participating in a multi-bit bitfield and therefore represented multiple
functions. This fact was overlooked in the original patch.

Fixes: 56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver)
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus 2016-10-15T16:26:12+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-10-15T16:26:12+00:00 133d970e0dadf7b413db19893acc5b26664bf4a1 Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ... 
Pull MIPS updates from Ralf Baechle:
 "This is the main MIPS pull request for 4.9:

  MIPS core arch code:
   - traps: 64bit kernels should read CP0_EBase 64bit
   - traps: Convert ebase to KSEG0
   - c-r4k: Drop bc_wback_inv() from icache flush
   - c-r4k: Split user/kernel flush_icache_range()
   - cacheflush: Use __flush_icache_user_range()
   - uprobes: Flush icache via kernel address
   - KVM: Use __local_flush_icache_user_range()
   - c-r4k: Fix flush_icache_range() for EVA
   - Fix -mabi=64 build of vdso.lds
   - VDSO: Drop duplicated -I*/-E* aflags
   - tracing: move insn_has_delay_slot to a shared header
   - tracing: disable uprobe/kprobe on compact branch instructions
   - ptrace: Fix regs_return_value for kernel context
   - Squash lines for simple wrapper functions
   - Move identification of VP(E) into proc.c from smp-mt.c
   - Add definitions of SYNC barrierstype values
   - traps: Ensure full EBase is written
   - tlb-r4k: If there are wired entries, don't use TLBINVF
   - Sanitise coherentio semantics
   - dma-default: Don't check hw_coherentio if device is non-coherent
   - Support per-device DMA coherence
   - Adjust MIPS64 CAC_BASE to reflect Config.K0
   - Support generating Flattened Image Trees (.itb)
   - generic: Introduce generic DT-based board support
   - generic: Convert SEAD-3 to a generic board
   - Enable hardened usercopy
   - Don't specify STACKPROTECTOR in defconfigs

  Octeon:
   - Delete dead code and files across the platform.
   - Change to use all memory into use by default.
   - Rename upper case variables in setup code to lowercase.
   - Delete legacy hack for broken bootloaders.
   - Leave maintaining the link state to the actual ethernet/PHY drivers.
   - Add DTS for D-Link DSR-500N.
   - Fix PCI interrupt routing on D-Link DSR-500N.

  Pistachio:
   - Remove ANDROID_TIMED_OUTPUT from defconfig

  TX39xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  TX49xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  txx9wdt:
   - Add missing clock (un)prepare calls for CCF

  BMIPS:
   - Add PW, GPIO SDHCI and NAND device node names
   - Support APPENDED_DTB
   - Add missing bcm97435svmb to DT_NONE
   - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
   - Add DT examples for BCM63268, BCM3368 and BCM6362
   - Add support for BCM3368 and BCM6362

  PCI
   - Reduce stack frame usage
   - Use struct list_head lists
   - Support for CONFIG_PCI_DOMAINS_GENERIC
   - Make pcibios_set_cache_line_size an initcall
   - Inline pcibios_assign_all_busses
   - Split pci.c into pci.c & pci-legacy.c
   - Introduce CONFIG_PCI_DRIVERS_LEGACY
   - Support generic drivers

  CPC
   - Convert bare 'unsigned' to 'unsigned int'
   - Avoid lock when MIPS CM >= 3 is present

  GIC:
   - Delete unused file smp-gic.c

  mt7620:
   - Delete unnecessary assignment for the field "owner" from PCI

  BCM63xx:
   - Let clk_disable() return immediately if clk is NULL

  pm-cps:
   - Change FSB workaround to CPU blacklist
   - Update comments on barrier instructions
   - Use MIPS standard lightweight ordering barrier
   - Use MIPS standard completion barrier
   - Remove selection of sync types
   - Add MIPSr6 CPU support
   - Support CM3 changes to Coherence Enable Register

  SMP:
   - Wrap call to mips_cpc_lock_other in mips_cm_lock_other
   - Introduce mechanism for freeing and allocating IPIs

  cpuidle:
   - cpuidle-cps: Enable use with MIPSr6 CPUs.

  SEAD3:
   - Rewrite to use DT and generic kernel feature.

  USB:
   - host: ehci-sead3: Remove SEAD-3 EHCI code

  FBDEV:
   - cobalt_lcdfb: Drop SEAD3 support

  dt-bindings:
   -  Document a binding for simple ASCII LCDs

  auxdisplay:
   - img-ascii-lcd: driver for simple ASCII LCD displays

  irqchip i8259:
   - i8259: Add domain before mapping parent irq
   - i8259: Allow platforms to override poll function
   - i8259: Remove unused i8259A_irq_pending

  Malta:
   - Rewrite to use DT

  of/platform:
   - Probe "isa" busses by default

  CM:
   - Print CM error reports upon bus errors

  Module:
   - Migrate exception table users off module.h and onto extable.h
   - Make various drivers explicitly non-modular:
   - Audit and remove any unnecessary uses of module.h

  mailmap:
   - Canonicalize to Qais' current email address.

  Documentation:
   - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API

  Loongson1C:
   - Add CPU support for Loongson1C
   - Add board support
   - Add defconfig
   - Add RTC support for Loongson1C board

  All this except one Documentation fix has sat in linux-next and has
  survived Imagination's automated build test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits)
  Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
  MIPS: ptrace: Fix regs_return_value for kernel context
  MIPS: VDSO: Drop duplicated -I*/-E* aflags
  MIPS: Fix -mabi=64 build of vdso.lds
  MIPS: Enable hardened usercopy
  MIPS: generic: Convert SEAD-3 to a generic board
  MIPS: generic: Introduce generic DT-based board support
  MIPS: Support generating Flattened Image Trees (.itb)
  MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
  MIPS: Print CM error reports upon bus errors
  MIPS: Support per-device DMA coherence
  MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
  MIPS: Sanitise coherentio semantics
  MIPS: PCI: Support generic drivers
  MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
  MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
  MIPS: PCI: Inline pcibios_assign_all_busses
  MIPS: PCI: Make pcibios_set_cache_line_size an initcall
  MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
  MIPS: PCI: Use struct list_head lists
  ...
Merge tag 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma 2016-10-14T20:35:05+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-10-14T20:35:05+00:00 b292fb80bb44726ac1055d443d951a3058fc8263 Pull more rdma updates from Doug Ledford: "This merge window was the first where Huawei had to try and coordinate their patches between their net driver and their new roce driver (similar to mlx4 and mlx5). They didn't do horribly, but there were some issues (and we knew that because they simply didn't know what to do in the beginning). As a result, I had a set of patches that depended on some patches that normally would have come to you via Dave's tree. Those patches have been on netdev@ for a while, so I got Dave to give me his approval to send them to you. As such, the other 29 patches I had behind them are also now ready to go. This catches the hns and hns-roce drivers up to current, and for future patches we are working with them to get them up to speed on how to do joint driver development so that they don't have these sorts of cross tree dependency issues again. BTW, Dave gave me permission to add his Acked-by: to the patches against the net tree, but I've had this branch through 0day (but not linux-next since it was off by itself) and I didn't want to rebase the series just to add Dave's ack for the 8 patches in the net area. Updates to the hns drivers: - Small patch set for hns net driver that the roce patches depend on - Various fixes to the hns-roce driver - Add connection manager support to the hns-roce driver" * tag 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (36 commits) IB/hns: Fix for removal of redundant code IB/hns: Delete the redundant lines in hns_roce_v1_m_qp() IB/hns: Fix the bug when platform_get_resource() exec fail IB/hns: Update the rq head when modify qp state IB/hns: Cq has not been freed IB/hns: Validate mtu when modified qp IB/hns: Some items of qpc need to take user param IB/hns: The Ack timeout need a lower limit value IB/hns: Return bad wr while post send failed IB/hns: Fix bug of memory leakage for registering user mr IB/hns: Modify the init of iboe lock IB/hns: Optimize code of aeq and ceq interrupt handle and fix the bug of qpn IB/hns: Delete the sqp_start from the structure hns_roce_caps IB/hns: Fix bug of clear hem IB/hns: Remove unused parameter named qp_type IB/hns: Simplify function of pd alloc and qp alloc IB/hns: Fix bug of using uninit refcount and free IB/hns: Remove parameters of resize cq IB/hns: Remove unused parameters in some functions IB/hns: Add node_guid definition to the bindings document ... 
Pull more rdma updates from Doug Ledford:
 "This merge window was the first where Huawei had to try and coordinate
  their patches between their net driver and their new roce driver
  (similar to mlx4 and mlx5).

  They didn't do horribly, but there were some issues (and we knew that
  because they simply didn't know what to do in the beginning). As a
  result, I had a set of patches that depended on some patches that
  normally would have come to you via Dave's tree. Those patches have
  been on netdev@ for a while, so I got Dave to give me his approval to
  send them to you. As such, the other 29 patches I had behind them are
  also now ready to go.

  This catches the hns and hns-roce drivers up to current, and for
  future patches we are working with them to get them up to speed on how
  to do joint driver development so that they don't have these sorts of
  cross tree dependency issues again. BTW, Dave gave me permission to
  add his Acked-by: to the patches against the net tree, but I've had
  this branch through 0day (but not linux-next since it was off by
  itself) and I didn't want to rebase the series just to add Dave's ack
  for the 8 patches in the net area.

  Updates to the hns drivers:

   - Small patch set for hns net driver that the roce patches depend on

   - Various fixes to the hns-roce driver

   - Add connection manager support to the hns-roce driver"

* tag 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (36 commits)
  IB/hns: Fix for removal of redundant code
  IB/hns: Delete the redundant lines in hns_roce_v1_m_qp()
  IB/hns: Fix the bug when platform_get_resource() exec fail
  IB/hns: Update the rq head when modify qp state
  IB/hns: Cq has not been freed
  IB/hns: Validate mtu when modified qp
  IB/hns: Some items of qpc need to take user param
  IB/hns: The Ack timeout need a lower limit value
  IB/hns: Return bad wr while post send failed
  IB/hns: Fix bug of memory leakage for registering user mr
  IB/hns: Modify the init of iboe lock
  IB/hns: Optimize code of aeq and ceq interrupt handle and fix the bug of qpn
  IB/hns: Delete the sqp_start from the structure hns_roce_caps
  IB/hns: Fix bug of clear hem
  IB/hns: Remove unused parameter named qp_type
  IB/hns: Simplify function of pd alloc and qp alloc
  IB/hns: Fix bug of using uninit refcount and free
  IB/hns: Remove parameters of resize cq
  IB/hns: Remove unused parameters in some functions
  IB/hns: Add node_guid definition to the bindings document
  ...
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2016-10-14T20:19:30+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-10-14T20:19:30+00:00 689f891c980949d3eb64f61651db53cb347e0a13 Pull some more input subsystem updates from Dmitry Torokhov: "An update to the ALPS driver to support the V8 protocol with touchstick, a change for i8042 to skip selftest on many Asus laptops which helps to keep their touchpads working after resume, and a couple other driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - skip selftest on ASUS laptops Input: melfas_mip4 - add ic_name sysfs attribute Input: melfas_mip4 - add maintainer information Input: melfas_mip4 - add devicetree binding documentations Input: elantech - add Fujitsu Lifebook E556 to force crc_enabled Input: synaptics-rmi4 - fix error handling in I2C transport driver Input: synaptics-rmi4 - fix error handling in SPI transport driver Input: ALPS - add V8 protocol documentation Input: ALPS - set DualPoint flag for 74 03 28 devices Input: ALPS - allow touchsticks to report pressure Input: ALPS - handle 0-pressure 1F events Input: ALPS - add touchstick support for SS5 hardware Input: elantech - force needed quirks on Fujitsu H760 Input: elantech - fix Lenovo version typo 
Pull some more input subsystem updates from Dmitry Torokhov:
 "An update to the ALPS driver to support the V8 protocol with
  touchstick, a change for i8042 to skip selftest on many Asus laptops
  which helps to keep their touchpads working after resume, and a couple
  other driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - skip selftest on ASUS laptops
  Input: melfas_mip4 - add ic_name sysfs attribute
  Input: melfas_mip4 - add maintainer information
  Input: melfas_mip4 - add devicetree binding documentations
  Input: elantech - add Fujitsu Lifebook E556 to force crc_enabled
  Input: synaptics-rmi4 - fix error handling in I2C transport driver
  Input: synaptics-rmi4 - fix error handling in SPI transport driver
  Input: ALPS - add V8 protocol documentation
  Input: ALPS - set DualPoint flag for 74 03 28 devices
  Input: ALPS - allow touchsticks to report pressure
  Input: ALPS - handle 0-pressure 1F events
  Input: ALPS - add touchstick support for SS5 hardware
  Input: elantech - force needed quirks on Fujitsu H760
  Input: elantech - fix Lenovo version typo
Merge tag 'rtc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux 2016-10-14T20:13:44+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-10-14T20:13:44+00:00 8b70f716174d6a46787fcf72f8c569ef3efd9c27 Pull RTC updates from Alexandre Belloni: "RTC for 4.9 Subsystem: - delete owner assignment in multiple drivers - constify rtc_class_ops structures Drivers: - ac100: support clock-output-names - cmos: properly handle ACPI alarms and quirky BIOSes and other fixes - ds1307: fix century bit support while staying comaptible with previous behaviour by default - ds1347: switch to regmap - isl12057 is now handled by ds1307 - omap: support external wakeup - rv8803: allow to disable voltage drop detection" * tag 'rtc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (25 commits) rtc: rv8803: set VDETOFF and SWOFF via device tree dt/bindings: Add bindings for Micro Crystal rv8803 devicetree: Add Micro Crystal AG vendor id rtc: cmos: avoid unused function warning rtc: ac100: Add NULL checking for devm_kzalloc call rtc: ds1347: changed raw spi calls to register map calls rtc: cmos: Restore alarm after resume rtc: cmos: Clear ACPI-driven alarms upon resume rtc: omap: Support ext_wakeup configuration rtc: cmos: Initialize hpet timer before irq is registered rtc: asm9260: rework locking rtc: asm9260: allow COMPILE_TEST rtc: constify rtc_class_ops structures rtc: ac100: support clock-output-names in device tree binding rtc: rx6110: remove owner assignment rtc: pic32: Delete owner assignment rtc: bq32k: Fix handling of oscillator failure flag rtc: bq32k: Use correct mask name for 'minutes' register. rtc: sysfs: fix a cast removing the const attribute Documentation: dt: Intersil isl12057 is not a trivial device ... 
Pull RTC updates from Alexandre Belloni:
 "RTC for 4.9

  Subsystem:
   - delete owner assignment in multiple drivers
   - constify rtc_class_ops structures

  Drivers:
   - ac100: support clock-output-names
   - cmos: properly handle ACPI alarms and quirky BIOSes and other fixes
   - ds1307: fix century bit support while staying comaptible with
     previous behaviour by default
   - ds1347: switch to regmap
   - isl12057 is now handled by ds1307
   - omap: support external wakeup
   - rv8803: allow to disable voltage drop detection"

* tag 'rtc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (25 commits)
  rtc: rv8803: set VDETOFF and SWOFF via device tree
  dt/bindings: Add bindings for Micro Crystal rv8803
  devicetree: Add Micro Crystal AG vendor id
  rtc: cmos: avoid unused function warning
  rtc: ac100: Add NULL checking for devm_kzalloc call
  rtc: ds1347: changed raw spi calls to register map calls
  rtc: cmos: Restore alarm after resume
  rtc: cmos: Clear ACPI-driven alarms upon resume
  rtc: omap: Support ext_wakeup configuration
  rtc: cmos: Initialize hpet timer before irq is registered
  rtc: asm9260: rework locking
  rtc: asm9260: allow COMPILE_TEST
  rtc: constify rtc_class_ops structures
  rtc: ac100: support clock-output-names in device tree binding
  rtc: rx6110: remove owner assignment
  rtc: pic32: Delete owner assignment
  rtc: bq32k: Fix handling of oscillator failure flag
  rtc: bq32k: Use correct mask name for 'minutes' register.
  rtc: sysfs: fix a cast removing the const attribute
  Documentation: dt: Intersil isl12057 is not a trivial device
  ...
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux 2016-10-14T20:09:41+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-10-14T20:09:41+00:00 e5050143d67c80a8705d6fcf5f9972663a0f082e Pull more i2c updates from Wolfram Sang: "A small update pull request from I2C. This adds one comment to a change we did in this merge window to handle lockdep better, and pulls in a branch which should have been in 4.8 already improving DT support for I2C" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: gpio: pca953x: add a comment explaining the need for a lockdep subclass i2c: core: Add support for 'i2c-bus' subnode dt-bindings: i2c: Add support for 'i2c-bus' subnode 
Pull more i2c updates from Wolfram Sang:
 "A small update pull request from I2C.

  This adds one comment to a change we did in this merge window to
  handle lockdep better, and pulls in a branch which should have been in
  4.8 already improving DT support for I2C"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  gpio: pca953x: add a comment explaining the need for a lockdep subclass
  i2c: core: Add support for 'i2c-bus' subnode
  dt-bindings: i2c: Add support for 'i2c-bus' subnode
Merge branch 'next' into for-linus 2016-10-14T00:23:40+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2016-10-14T00:23:40+00:00 1134ca268e7387773cd6cf57aa82cc9d5e0f9127 Prepare second round of input updates for 4.9 merge window. 
Prepare second round of input updates for 4.9 merge window.