Pull irq updates from Thomas Gleixner:
 "This lot provides:

   * Bugfixes for armada irq controller
   * Updates to renesas irq chip
   * Support for the TI-NSPIRE irq controller

  Not strictly a bug fix only pull request, but important updates for
  some of the arm Socs which I completely forgot to send last week.

  Seems like my obliviousness is getting worse, I just can't remember
  when it started"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: Add support for TI-NSPIRE irqchip
  irqchip: renesas-irqc: Enable mask on suspend
  irqchip: renesas-irqc: Use lazy disable
  irqchip: armada-370-xp: fix MSI race condition
  irqchip: armada-370-xp: fix IPI race condition

Pull sound fixes from Takashi Iwai:
 "The big chunks here are the updates for oxygen driver for Xonar DG
  devices, which were slipped from the previous pull request.  They are
  device-specific and thus not too dangerous.

  Other than that, all patches are small bug fixes, mainly for Samsung
  build fixes, a few HD-audio enhancements, and other misc ASoC fixes.
  (And this time ASoC merge is less than Octopus, lucky seven :)"

* tag 'sound-fix-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (42 commits)
  ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled
  ALSA: hda - add headset mic detect quirks for another Dell laptop
  ALSA: oxygen: Xonar DG(X): cleanup and minor changes
  ALSA: oxygen: Xonar DG(X): modify high-pass filter control
  ALSA: oxygen: Xonar DG(X): modify input select functions
  ALSA: oxygen: Xonar DG(X): modify capture volume functions
  ALSA: oxygen: Xonar DG(X): use headphone volume control
  ALSA: oxygen: Xonar DG(X): modify playback output select
  ALSA: oxygen: Xonar DG(X): capture from I2S channel 1, not 2
  ALSA: oxygen: Xonar DG(X): move the mixer code into another file
  ALSA: oxygen: modify CS4245 register dumping function
  ALSA: oxygen: modify adjust_dg_dac_routing function
  ALSA: oxygen: Xonar DG(X): modify DAC/ADC parameters function
  ALSA: oxygen: Xonar DG(X): modify initialization functions
  ALSA: oxygen: Xonar DG(X): add new CS4245 SPI functions
  ALSA: oxygen: additional definitions for the Xonar DG/DGX card
  ALSA: oxygen: change description of the xonar_dg.c file
  ALSA: oxygen: export oxygen_update_dac_routing symbol
  ALSA: oxygen: add mute mask for the OXYGEN_PLAY_ROUTING register
  ALSA: oxygen: modify the SPI writing function
  ...

Pull media updates from Mauro Carvalho Chehab:
 - a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4)
 - a new dvb frontend for ds2103 chipset (m88ds2103)
 - a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf)
 - new drivers for R-Car VSP1
 - a new radio driver: radio-raremono
 - a new tuner driver for ts2022 chipset (m88ts2022)
 - the analog part of em28xx is now a separate module that only
   load/runs if the device is not a pure digital TV device
 - added a staging driver for bcm2048 radio devices
 - the omap 2 video driver (omap24xx) was moved to staging.  This driver
   is for an old hardware and uses a deprecated Kernel internal API.  If
   nobody cares enough to fix it, it would be removed on a couple Kernel
   releases
 - the sn9c102 driver was moved to staging.  This driver was replaced by
   gspca, and disabled on some distros, as almost all devices are known
   to work properly with gspca.  It should be removed from kernel on a
   couple Kernel releases
 - lots of driver fixes, improvements and cleanups

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits)
  [media] media: v4l2-dev: fix video device index assignment
  [media] rc-core: reuse device numbers
  [media] em28xx-cards: properly initialize the device bitmap
  [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c
  [media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c
  [media] Staging: media: Fix quoted string split across line in as102_fe.c
  [media] media: st-rc: Add reset support
  [media] m2m-deinterlace: fix allocated struct type
  [media] radio-usb-si4713: fix sparse non static symbol warnings
  [media] em28xx-audio: remove needless check before usb_free_coherent()
  [media] au0828: Fix sparse non static symbol warning
  Revert "[media] go7007-usb: only use go->dev after allocated"
  [media] em28xx-audio: provide an error code when URB submit fails
  [media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting
  [media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0
  [media] em28xx: make 'em28xx_ctrl_ops' static
  em28xx-alsa: Fix error patch for init/fini
  [media] em28xx-audio: flush work at .fini
  [media] drxk: remove the option to load firmware asynchronously
  [media] em28xx: adjust period size at runtime
  ...

Pull ARM SoC late changes from Kevin Hilman:
 "These are changes that arrived a little late but were considered
  self-contained enough to still go in for v3.14.

  They are all device tree updtes this time around, and mainly for
  Broadcom SoCs"

* tag 'late-dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: moxart: move fixed rate clock child node to board level dts
  clk: bcm281xx: define kona clock binding
  ARM: dts: add usb udc support to bcm281xx
  ARM: dts: Specify clocks for timer on bcm11351
  Documentation: dt: kona-timer: Add clocks property
  ARM: dts: Specify clocks for SDHCIs on bcm11351
  Documentation: dt: kona-sdhci: Add clocks property
  ARM: dts: Specify clocks for UARTs on bcm11351
  ARM: dts: bcm281xx: Add i2c busses
  ARM: dts: Declare clocks as fixed on bcm11351
  ARM: dts: bcm28155-ap: Enable all the i2c busses

Pull more powerpc bits from Ben Herrenschmidt:
 "Here are a few more powerpc bits for this merge window.  The bulk is
  made of two pull requests from Scott and Anatolij that I had missed
  previously (they arrived while I was away).  Since both their branches
  are in -next independently, and the content has been around for a
  little while, they can still go in.

  The rest is mostly bug and regression fixes, a small series of
  cleanups to our pseries cpuidle code (including moving it to the right
  place), and one new cpuidle bakend for the powernv platform.  I also
  wired up the new sched_attr syscalls"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (37 commits)
  powerpc: Wire up sched_setattr and sched_getattr syscalls
  powerpc/hugetlb: Replace __get_cpu_var with get_cpu_var
  powerpc: Make sure "cache" directory is removed when offlining cpu
  powerpc/mm: Fix mmap errno when MAP_FIXED is set and mapping exceeds the allowed address space
  powerpc/powernv/cpuidle: Back-end cpuidle driver for powernv platform.
  powerpc/pseries/cpuidle: smt-snooze-delay cleanup.
  powerpc/pseries/cpuidle: Remove MAX_IDLE_STATE macro.
  powerpc/pseries/cpuidle: Make cpuidle-pseries backend driver a non-module.
  powerpc/pseries/cpuidle: Use cpuidle_register() for initialisation.
  powerpc/pseries/cpuidle: Move processor_idle.c to drivers/cpuidle.
  powerpc: Fix 32-bit frames for signals delivered when transactional
  powerpc/iommu: Fix initialisation of DART iommu table
  powerpc/numa: Fix decimal permissions
  powerpc/mm: Fix compile error of pgtable-ppc64.h
  powerpc: Fix hw breakpoints on !HAVE_HW_BREAKPOINT configurations
  clk: corenet: Adds the clock binding
  powerpc/booke64: Guard e6500 tlb handler with CONFIG_PPC_FSL_BOOK3E
  powerpc/512x: dts: add MPC5125 clock specs
  powerpc/512x: clk: support MPC5121/5123/5125 SoC variants
  powerpc/512x: clk: enforce even SDHC divider values
  ...

Pull drm updates from Dave Airlie:
 "Been a bit busy, first week of kids school, and waiting on other trees
  to go in before I could send this, so its a bit later than I'd
  normally like.

  Highlights:
   - core:
      timestamp fixes, lots of misc cleanups
   - new drivers:
      bochs virtual vga
   - vmwgfx:
      major overhaul for their nextgen virt gpu.
   - i915:
      runtime D3 on HSW, watermark fixes, power well work, fbc fixes,
      bdw is no longer prelim.
   - nouveau:
      gk110/208 acceleration, more pm groundwork, old overlay support
   - radeon:
      dpm rework and clockgating for CIK, pci config reset, big endian
      fixes
   - tegra:
      panel support and DSI support, build as module, prime.
   - armada, omap, gma500, rcar, exynos, mgag200, cirrus, ast:
      fixes
   - msm:
      hdmi support for mdp5"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (595 commits)
  drm/nouveau: resume display if any later suspend bits fail
  drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip
  drm/nouveau: implement hooks for needed for drm vblank timestamping support
  drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping
  drm/nv50: fill in crtc mode struct members from crtc_mode_fixup
  drm/radeon/dce8: workaround for atom BlankCrtc table
  drm/radeon/DCE4+: clear bios scratch dpms bit (v2)
  drm/radeon: set si_notify_smc_display_change properly
  drm/radeon: fix DAC interrupt handling on DCE5+
  drm/radeon: clean up active vram sizing
  drm/radeon: skip async dma init on r6xx
  drm/radeon/runpm: don't runtime suspend non-PX cards
  drm/radeon: add ring to fence trace functions
  drm/radeon: add missing trace point
  drm/radeon: fix VMID use tracking
  drm: ast,cirrus,mgag200: use drm_can_sleep
  drm/gma500: Lock struct_mutex around cursor updates
  drm/i915: Fix the offset issue for the stolen GEM objects
  DRM: armada: fix missing DRM_KMS_FB_HELPER select
  drm/i915: Decouple GPU error reporting from ring initialisation
  ...

Pull slave-dma updates from Vinod Koul:
 - new driver for BCM2835 used in R-pi
 - new driver for MOXA ART
 - dma_get_any_slave_channel API for DT based systems
 - minor fixes and updates spread acrooss driver

[ The fsl-ssi dual fifo mode support addition clashed badly with the
  other changes to fsl-ssi that came in through the sound merge.  I did
  a very rough cut at fixing up the conflict, but Nicolin Chen (author
  of both sides) will need to verify and check things ]

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits)
  dmaengine: mmp_pdma: fix mismerge
  dma: pl08x: Export pl08x_filter_id
  acpi-dma: align documentation with kernel-doc format
  dma: fix vchan_cookie_complete() debug print
  DMA: dmatest: extend the "device" module parameter to 32 characters
  drivers/dma: fix error return code
  dma: omap: Set debug level to debugging messages
  dmaengine: fix kernel-doc style typos for few comments
  dma: tegra: add support for Tegra148/124
  dma: dw: use %pad instead of casting dma_addr_t
  dma: dw: join split up messages
  dma: dw: fix style of multiline comment
  dmaengine: k3dma: fix sparse warnings
  dma: pl330: Use dma_get_slave_channel() in the of xlate callback
  dma: pl330: Differentiate between submitted and issued descriptors
  dmaengine: sirf: Add device_slave_caps interface
  DMA: Freescale: change BWC from 256 bytes to 1024 bytes
  dmaengine: Add MOXA ART DMA engine driver
  dmaengine: Add DMA_PRIVATE to BCM2835 driver
  dma: imx-sdma: Assign a default script number for ROM firmware cases
  ...

Pull watchdog updates from Wim Van Sebroeck:
 - new driver for bcm281xx watchdog device
 - new driver for gpio based watchdog devices
 - remove DEFINE_PCI_DEVICE_TABLE macro for watchdog device drivers
 - conversion of davinci_wdt and mpc8xxx_wdt to watchdog core
 - improvements on davinci_wdt, at91/dt, at91sam9_wdt and s3c2410_wdt
 - Auto-detect IO address and expand supported chips on w836* super-I/O
   chipsets
 - core: Make dt "timeout-sec" property work on drivers w/out min/max
 - fix Kconfig dependencies
 - sirf: Remove redundant of_match_ptr helper
 - mach-moxart: add restart handler
 - hpwdt patch to display better panic information
 - imx2_wdt: disable watchdog timer during low power mode

* git://www.linux-watchdog.org/linux-watchdog: (31 commits)
  watchdog: w83627hf_wdt: Reset watchdog trigger during initialization
  watchdog: w83627hf: Add support for W83697HF and W83697UG
  watchdog: w83627hf: Auto-detect IO address and supported chips
  watchdog: at91sam9_wdt: increase security margin on watchdog counter reset
  watchdog: at91sam9_wdt: avoid spurious watchdog reset during init
  watchdog: at91sam9_wdt: fix secs_to_ticks
  ARM: at91/dt: add watchdog properties to kizbox board
  ARM: at91/dt: add sam9 watchdog default options to SoCs
  watchdog: at91sam9_wdt: update device tree doc
  watchdog: at91sam9_wdt: better watchdog support
  watchdog: sp805_wdt depends also on ARM64
  watchdog: mach-moxart: add restart handler
  watchdog: mpc8xxx_wdt convert to watchdog core
  watchdog: sirf: Remove redundant of_match_ptr helper
  watchdog: hpwdt patch to display informative string
  watchdog: dw_wdt: remove build dependencies
  watchdog: imx2_wdt: disable watchdog timer during low power mode
  watchdog: s3c2410_wdt: Report when the watchdog reset the system
  watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register
  watchdog: s3c2410_wdt: Handle rounding a little better for timeout
  ...

Pull networking fixes from David Miller:
 "Several fixups, of note:

  1) Fix unlock of not held spinlock in RXRPC code, from Alexey
     Khoroshilov.

  2) Call pci_disable_device() from the correct shutdown path in bnx2x
     driver, from Yuval Mintz.

  3) Fix qeth build on s390 for some configurations, from Eugene
     Crosser.

  4) Cure locking bugs in bond_loadbalance_arp_mon(), from Ding
     Tianhong.

  5) Must do netif_napi_add() before registering netdevice in sky2
     driver, from Stanislaw Gruszka.

  6) Fix lost bug fix during merge due to code movement in ieee802154,
     noticed and fixed by the eagle eyed Stephen Rothwell.

  7) Get rid of resource leak in xen-netfront driver, from Annie Li.

  8) Bounds checks in qlcnic driver are off by one, from Manish Chopra.

  9) TPROXY can leak sockets when TCP early demux is enabled, fix from
     Holger Eitzenberger"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits)
  qeth: fix build of s390 allmodconfig
  bonding: fix locking in bond_loadbalance_arp_mon()
  tun: add device name(iff) field to proc fdinfo entry
  DT: net: davinci_emac: "ti, davinci-no-bd-ram" property is actually optional
  DT: net: davinci_emac: "ti, davinci-rmii-en" property is actually optional
  bnx2x: Fix generic option settings
  net: Fix warning on make htmldocs caused by skbuff.c
  llc: remove noisy WARN from llc_mac_hdr_init
  qlcnic: Fix loopback test failure
  qlcnic: Fix tx timeout.
  qlcnic: Fix initialization of vlan list.
  qlcnic: Correct off-by-one errors in bounds checks
  net: Document promote_secondaries
  net: gre: use icmp_hdr() to get inner ip header
  i40e: Add missing braces to i40e_dcb_need_reconfig()
  xen-netfront: fix resource leak in netfront
  net: 6lowpan: fixup for code movement
  hyperv: Add support for physically discontinuous receive buffer
  sky2: initialize napi before registering device
  net: Fix memory leak if TPROXY used with TCP early demux
  ...

The "ti,davinci-no-bd-ram" property for the DaVinci EMAC binding simply can't be
required one, as it's boolean (which means it's absent if false).

While at it, document the property better...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>