All nodes need an explicit additionalProperties or unevaluatedProperties
unless a $ref has one that's false. As that is not the case with
usb-device.yaml, "additionalProperties" is needed here.

Fixes: c44d9dab31d6 ("dt-bindings: usb: Add downstream facing ports to realtek binding")
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240523194500.2958192-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
  Nothing hugely earth-shattering, just constant forward progress for
  hardware support of new devices and cleanups over the drivers.

  Included in here are:

   - Thunderbolt / USB 4 driver updates

   - typec driver updates

   - dwc3 driver updates

   - gadget driver updates

   - uss720 driver id additions and fixes (people use USB->arallel port
     devices still!)

   - onboard-hub driver rename and additions for new hardware

   - xhci driver updates

   - other small USB driver updates and additions for quirks and api
     changes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
  drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub
  usb: fotg210: Add missing kernel doc description
  usb: dwc3: core: Fix unused variable warning in core driver
  usb: typec: tipd: rely on i2c_get_match_data()
  usb: typec: tipd: fix event checking for tps6598x
  usb: typec: tipd: fix event checking for tps25750
  dt-bindings: usb: qcom,dwc3: fix interrupt max items
  usb: fotg210: Use *-y instead of *-objs in Makefile
  usb: phy: tegra: Replace of_gpio.h by proper one
  usb: typec: ucsi: displayport: Fix potential deadlock
  usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
  usb: musc: Remove unused list 'buffers'
  usb: dwc3: Wait unconditionally after issuing EndXfer command
  usb: gadget: u_audio: Clear uac pointer when freed.
  usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
  dt-bindings: usb: dwc3: Add QDU1000 compatible
  usb: core: Remove the useless struct usb_devmap which is just a bitmap
  MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry
  USB: usb_parse_endpoint: ignore reserved bits
  usb: xhci: compact 'trb_in_td()' arguments
  ...

Pull devicetree updates from Rob Herring:
 "DT Bindings:

   - Convert samsung,exynos5-dp, atmel,lcdc, aspeed,ast2400-wdt bindings
     to schemas

   - Add bindings for Allwinner H616 NMI controller, Renesas r8a779g0
     irqc, Renesas R-Car V4M TMU and CMT timers, Freescale S32G3
     linflexuart, and Mediatek MT7988 XHCI

   - Add 'reg' constraints on DSI and SPI display panels

   - More dropping of unnecessary quotes in schemas

   - Use full paths rather than relative paths in schema $refs

   - Drop redundant storing of phandle for reserved memory

  DT Core:

   - Use scope based cleanups for kfree() and of_node_put()

   - Track interrupt-map and power-supplies for fw_devlink

   - Add buffer overflow check in of_modalias()

   - Add and use __of_prop_free() helper for freeing struct property"

* tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits)
  of: property: Add fw_devlink support for interrupt-map property
  dt-bindings: display: panel: constrain 'reg' in DSI panels
  dt-bindings: display: panel: constrain 'reg' in SPI panels
  dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref
  dt-bindings: Use full path to other schemas
  dt-bindings: PCI: qcom,pcie-sm8350: Drop redundant 'oneOf' sub-schema
  of: module: add buffer overflow check in of_modalias()
  dt-bindings: PCI: microchip: increase number of items in ranges property
  dt-bindings: Drop unnecessary quotes on keys
  dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop unnecessary quotes
  of: property: Use scope based cleanup on port_node
  of: reserved_mem: Remove the use of phandle from the reserved_mem APIs
  of: property: fw_devlink: Add support for "power-supplies" binding
  dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
  dt-bindings: irq: sun7i-nmi: Add binding for the H616 NMI controller
  dt-bindings: interrupt-controller: renesas,irqc: Add r8a779g0 support
  dt-bindings: timer: renesas,tmu: Add R-Car V4M support
  dt-bindings: timer: renesas,cmt: Add R-Car V4M support
  of: Use scope based of_node_put() cleanups
  of: Use scope based kfree() cleanups
  ...

Pull SoC driver updates from Arnd Bergmann:
 "As usual, these are updates for drivers that are specific to certain
  SoCs or firmware running on them.

  Notable updates include

   - The new STMicroelectronics STM32 "firewall" bus driver that is used
     to provide a barrier between different parts of an SoC

   - Lots of updates for the Qualcomm platform drivers, in particular
     SCM, which gets a rewrite of its initialization code

   - Firmware driver updates for Arm FF-A notification interrupts and
     indirect messaging, SCMI firmware support for pin control and
     vendor specific interfaces, and TEE firmware interface changes
     across multiple TEE drivers

   - A larger cleanup of the Mediatek CMDQ driver and some related bits

   - Kconfig changes for riscv drivers to prepare for adding Kanaan k230
     support

   - Multiple minor updates for the TI sysc bus driver, memory
     controllers, hisilicon hccs and more"

* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
  firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
  soc: qcom: pmic_glink: Make client-lock non-sleeping
  dt-bindings: soc: qcom,wcnss: fix bluetooth address example
  soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
  bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
  bus: etzpc: introduce ETZPC firewall controller driver
  firmware: arm_ffa: Avoid queuing work when running on the worker queue
  bus: ti-sysc: Drop legacy idle quirk handling
  bus: ti-sysc: Drop legacy quirk handling for smartreflex
  bus: ti-sysc: Drop legacy quirk handling for uarts
  bus: ti-sysc: Add a description and copyrights
  bus: ti-sysc: Move check for no-reset-on-init
  soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
  soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
  firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
  bus: rifsc: introduce RIFSC firewall controller driver
  of: property: fw_devlink: Add support for "access-controller"
  soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
  soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
  soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
  ...

A recent commit adding the SC8280XP multiport controller to the binding
failed to update the interrupt maxItems, which results it DT checker
warnings like:

	arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dtb: usb@a4f8800: interrupts-extended: [[1, 0, 130, 4], [1, 0, 135, 4], [1, 0, 857, 4], [1, 0, 856, 4], [1, 0, 131, 4], [1, 0, 136, 4], [1, 0, 860, 4], [1, 0, 859, 4], [136, 127, 3], [136, 126, 3], [136, 129, 3], [136, 128, 3], [136, 131, 3], [136, 130, 3], [136, 133, 3], [136, 132, 3], [136, 16, 4], [136, 17, 4]] is too long

Fixes: 80adfb54044e ("dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport")
Reported-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/171502764588.89686.5159158035724685961.robh@kernel.org
Link: https://lore.kernel.org/lkml/171449016553.3484108.5214033788092698309.robh@kernel.org/
Cc: Krishna Kurapati <quic_kriskura@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240509083822.397-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Document the QDU1000 dwc3 compatible.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240502082017.13777-4-quic_kbajaj@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Exynos-based Google Tensor gs101 SoC has a DWC3 compatible USB
controller and can reuse the existing Exynos glue. Update the dt schema
to include the google,gs101-dwusb3 compatible for it.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240423-usb-dwc3-gs101-v1-1-2f331f88203f@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the compatible string for SC8280 Multiport USB controller from
Qualcomm.

There are 4 power event interrupts supported by this controller
(one for each port of multiport controller). Add all the 4 as
non-optional interrupts for SC8280XP-MP

Also each port of multiport has one DP and one DM IRQ. Add all DP/DM
IRQs related to 4 ports of SC8280XP Teritiary controller.

Also added SuperSpeed PHY interrupt for both Superspeed ports.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240420044901.884098-6-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add bindings to indicate properties required to support multiport
on Synopsys DWC3 controller.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240420044901.884098-2-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert USB UHCI bindings to DT schema. Documenting aspeed compatibles
and missing properties. Adding aspeed/generic-uhci example and fixing
nodename for the original example.

Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240423150550.91055-1-sheharyaar48@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>