Pull devicetree fixes from Rob Herring:

 - Cleanups on properties with standard unit suffixes

 - Fix overwriting dma_range_map if there's no 'dma-ranges' property

 - Fix a bug when creating a /chosen node from ARM ATAGs

 - Add missing properties for TI j721e USB binding

 - Several doc reference updates due to DT schema conversions

* tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Cleanup standard unit properties
  of/device: Update dma_range_map only when dev has valid dma-ranges
  ARM: zImage: atags_to_fdt: Fix node names on added root nodes
  dt-bindings: usb: j721e: add ranges and dma-coherent props
  dt-bindings:iio:adc: update adc.yaml reference
  dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references
  dt-bindings: display: mediatek: update mediatek,dpi.yaml reference
  ASoC: audio-graph-card: update audio-graph-card.yaml reference

Add missed 'ranges' and 'dma-coherent' properties as cdns-usb DT nodes has
child node and DMA IO is coherent on TI K3 J721E/J7200 SoCs.

This also fixes dtbs_check warning:
 cdns-usb@4104000: 'dma-coherent', 'ranges' do not match any of the regexes: '^usb@', 'pinctrl-[0-9]+'

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210115193124.5706-1-grygorii.strashko@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>

Add compatible string in j721e-usb binding file as the same USB subsystem
is present in AM64.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20201215042549.7956-1-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

'maxItems' equal to the 'items' list length is redundant. 'maxItems' is
preferred for a single entry while greater than 1 should have an 'items'
list.

A meta-schema check for this is pending once these existing cases are
fixed.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: dri-devel@lists.freedesktop.org
Cc: dmaengine@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-usb@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20201222040645.1323611-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

Pull ARM device tree updates from Arnd Bergmann:
 "Across all platforms, there is a continued move towards DT schema for
  validating the dts files. As a result there are bug fixes for mistakes
  that are found using these schema, in addition to warnings from the
  dtc compiler.

  As usual, many changes are for adding support for additional on-chip
  and on-board components in the machines we already support.

  The newly supported SoCs for this release are:

   - MStar Infinity2M, a low-end IP camera chip based on a dual-core
     Cortex-A7, otherwise similar to the Infinity chip we already
     support. This is also known as the SigmaStar SSD202D, and we add
     support for the Honestar ssd201htv2 development kit.

   - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
     (BMC), in the same family as the NPCM750. This gets used in the
     Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
     which are added as well.

   - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
     Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
     GT-AC5300 high-end WiFi router based on this chip.

   - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
     meant for faster Chromebooks and tablets. It gets added along with
     its reference design.

   - Mediatek MT6779 (Helio P90) is a high-end phone chip from last
     year's generation, also added along with its reference board. This
     one is still based on Cortex-A75/A55.

   - Mediatek MT8167 is a version of the already supported MT8516 chip,
     both based on Cortex-A35. It gets added along with the "Pumpkin"
     single board computer, but is likely to also make its way into
     low-end tablets in the future.

  For the already supported chips, there are a number of new boards.
  Interestingly there are more 32-bit machines added this time than
  64-bit. Here is a brief list of the new boards:

   - Three new Mikrotik router variants based on Marvell Prestera
     98DX3236, a close relative of the more common Armada XP

   - A reference board for the Marvell Armada 382

   - Three new servers using ASpeed baseboard management controllers,
     the actual machines being from Bytedance, Facebook and IBM, and one
     machine using the Nuvoton NPCM750 BMC.

   - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.

   - The usual set of 32-bit i.MX industrial/embedded hardware:
       * Protonic WD3 (tractor e-cockpit)
       * Kamstrup OMNIA Flex Concentrator (smart grid platform)
       * Van der Laan LANMCU (food storage)
       * Altesco I6P (vehicle inspection stations)
       * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard

   - DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
     aleady supported DHCOM module

   - Three new Allwinner SoC based single-board computers:
       * NanoPi R1 (H3 based)
       * FriendlyArm ZeroPi (H3 based)
       * Elimo Initium SBC (S3 based)

   - Ouya Game Console based on Nvidia Tegra 3

   - Version 5 of the already supported Zynq Z-Turn MYIR Board

   - LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
     is a repackaged 16-core LX2160A

   - A series of Kontron i.MX8M Mini baseboard/SoM versions

   - Espressobin Ultra, a new variant of the popular Armada 3700 based
     board,

   - IEI Puzzle-M801, a rackmount network appliance based on Marvell
     Armada 8040

   - Microsoft Lumia 950 XL, a phone

   - HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
     sm8150, respectively

   - Three new board variants of the "Trogdor" Chromebook (sc7180)

   - New board variants of the Renesas based "Kingfisher" and "HiHope"
     reference boards

   - Kobol Helios64, an open source NAS appliance based on Rockchips
     RK3399

   - Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
     carrier boards"

* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
  arm64: dts: sparx5: Add SGPIO devices
  arm64: dts: sparx5: Add reset support
  dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
  ARM: mstar: SMP support
  ARM: mstar: Wire up smpctrl for SSD201/SSD202D
  ARM: mstar: Add smp ctrl registers to infinity2m dtsi
  ARM: mstar: Add dts for Honestar ssd201htv2
  ARM: mstar: Add chip level dtsi for SSD202D
  ARM: mstar: Add common dtsi for SSD201/SSD202D
  ARM: mstar: Add infinity2m support
  dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
  dt-bindings: vendor-prefixes: Add honestar vendor prefix
  dt-bindings: mstar: Add binding details for mstar,smpctrl
  ARM: mstar: Fill in GPIO controller properties for infinity
  ARM: mstar: Add gpio controller to MStar base dtsi
  ARM: zynq: Fix incorrect reference to XM013 instead of XM011
  ARM: zynq: Convert at25 binding to new description on zc770-xm013
  ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
  ARM: zynq: Fix leds subnode name for zc702/zybo-z7
  ARM: zynq: Rename bus to be align with simple-bus yaml
  ...

Pull char / misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 5.11-rc1.

  Continuing the tradition of previous -rc1 pulls, there seems to be
  more and more tiny driver subsystems flowing through this tree.

  Lots of different things, all of which have been in linux-next for a
  while with no reported issues:

   - extcon driver updates

   - habannalab driver updates

   - mei driver updates

   - uio driver updates

   - binder fixes and features added

   - soundwire driver updates

   - mhi bus driver updates

   - phy driver updates

   - coresight driver updates

   - fpga driver updates

   - speakup driver updates

   - slimbus driver updates

   - various small char and misc driver updates"

* tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits)
  extcon: max77693: Fix modalias string
  extcon: fsa9480: Support TI TSU6111 variant
  extcon: fsa9480: Rewrite bindings in YAML and extend
  dt-bindings: extcon: add binding for TUSB320
  extcon: Add driver for TI TUSB320
  slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew()
  siox: Make remove callback return void
  siox: Use bus_type functions for probe, remove and shutdown
  spmi: Add driver shutdown support
  spmi: fix some coding style issues at the spmi core
  spmi: get rid of a warning when built with W=1
  uio: uio_hv_generic: use devm_kzalloc() for private data alloc
  uio: uio_fsl_elbc_gpcm: use device-managed allocators
  uio: uio_aec: use devm_kzalloc() for uio_info object
  uio: uio_cif: use devm_kzalloc() for uio_info object
  uio: uio_netx: use devm_kzalloc() for or uio_info object
  uio: uio_mf624: use devm_kzalloc() for uio_info object
  uio: uio_sercos3: use device-managed functions for simple allocs
  uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers
  uio: uio_dmem_genirq: convert simple allocations to device-managed
  ...

Peter writes:

Below are main changes for v5.11-rc1:

For Chipidea USB2:
- Add tracepoint support for UDC
- Some tiny improvements

For Cadence USB3
- Add some quirks for host mode, and let host work well at more use cases
	* SKIP_PHY_INIT
	* Disable BEI
	* Enable runtime PM default for i.mx platform
- Some tiny improvements

* tag 'usb-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
  MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER
  usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data()
  usb: chipidea: usbmisc_imx: Use of_device_get_match_data()
  usb: cdns3: fix NULL pointer dereference on no platform data
  usb: chipidea: trace: fix the endian issue
  usb: chipidea: add tracepoint support for udc
  doc: dt-binding: cdns,usb3: add wakeup-irq
  usb: cdns3: imx: enable runtime pm by default
  usb: cdns3: add quirk for enable runtime pm by default
  usb: cdns3: host: disable BEI support
  usb: cdns3: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT
  usb: cdns3: host: add .suspend_quirk for xhci-plat.c
  usb: cdns3: Rids of duplicate error message
  usb: cdns3: Add static to cdns3_gadget_exit function

To support low power mode for controller, the driver needs wakeup-irq
to reflect the signal changing after controller is stopped, and waking
the controller up accordingly.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>

Vinod writes:

phy-for-5.11

 - New phy drivers:
   - Mediatek MT7621 PCIe PHY (promoted from staging)
   - Ingenic USB phy driver supporting JZ4775 and X2000
   - Intel Keem Bay USB PHY driver
   - Marvell USB HSIC PHY driver supporting MMP3 SoC
   - AXG MIPI D-PHY driver

 - Updates:
   - Conversion to YAML binding for:
	- Broadcom SATA PHY
	- Cadence Sierra PHY bindings
	- STM32 USBC Phy
   - Support for Exynos5433 PCIe PHY
   - Support for Qualcomm SM8250 PCIe QMP PHY
   - Support for Exynos5420 USB2 phy
   - devm_platform_ioremap_resource conversion for bunch of drivers

* tag 'phy-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits)
  drm/mediatek: avoid dereferencing a null hdmi_phy on an error message
  phy: ingenic: depend on HAS_IOMEM
  phy: mediatek: statify mtk_hdmi_phy_driver
  dt-bindings: phy: Convert Broadcom SATA PHY to YAML
  devicetree: phy: rockchip-emmc add output-tapdelay-select
  phy: rockchip-emmc: output tap delay dt property
  PHY: Ingenic: Add USB PHY driver using generic PHY framework.
  dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000.
  USB: PHY: JZ4770: Remove unnecessary function calls.
  devicetree: phy: rockchip-emmc: pulldown property
  phy: rockchip: set pulldown for strobe line in dts
  phy: renesas: rcar-gen3-usb2: disable runtime pm in case of failure
  phy: mediatek: allow compile-testing the hdmi phy
  phy/rockchip: Make PHY_ROCKCHIP_INNO_HDMI depend on HAS_IOMEM to fix build error
  phy: samsung: Merge Kconfig for Exynos5420 and Exynos5250
  phy: ralink: phy-mt7621-pci: set correct name in MODULE_DEVICE_TABLE macro
  phy: ralink: phy-mt7621-pci: drop 'COMPILE_TEST' from Kconfig
  phy: mediatek: Make PHY_MTK_{XSPHY, TPHY} depend on HAS_IOMEM and OF_ADDRESS to fix build errors
  phy: tegra: xusb: Fix usb_phy device driver field
  phy: amlogic: replace devm_reset_control_array_get()
  ...

Move Ingenic USB PHY bindings from Documentation/devicetree/bindings/usb
to Documentation/devicetree/bindings/phy, and add bindings for JZ4775 SoC
and X2000 SoC.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20201116141906.11758-3-zhouyanjie@wanyeetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>