linux.git/Documentation/devicetree/bindings/usb, branch v4.9

Revert "Documentation: devicetree: dwc2: Deprecate g-tx-fifo-size"

2016-10-18T11:21:43+00:00

This binding was deprecated due to commit aa381a7259c3 ("usb: dwc2:
gadget: fix TX FIFO size and address initialization"). However that
commit is now reverted, so also revert this commit.

The binding is valid and shouldn't be deprecated.

This reverts commit 65e1ff7f4b5b ("Documentation: devicetree: dwc2:
Deprecate g-tx-fifo-size").

Signed-off-by: John Youn 
Acked-by: Rob Herring 
Signed-off-by: Felipe Balbi

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-10-08T04:34:49+00:00

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

   - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
     automotive SoC similar to the ⅹ8a7795 chip we already support, but
     the dts changes rely on a clock driver change that has been merged
     for v4.9 through the clk tree.

   - The Amlogic meson-gxbb (S905) platform gains support for a few
     drivers merged through our tree, in particular the network and usb
     driver changes are required and included here, and also the clk
     tree changes.

   - The Allwinner platforms have seen a large-scale change to their clk
     drivers and the dts file updates must come after that. This
     includes the newly added Nextthing GR8 platform, which is derived
     from sun5i/A13.

   - Some integrator (arm32) changes rely on clk driver changes.

   - A single patch for lpc32xx has no such dependency but wasn't added
     until just before the merge window"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  ARM: dts: lpc32xx: add device node for IRAM on-chip memory
  ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
  ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
  ARM: dts: sun8i: add pinmux for UART1 at PG
  dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
  dts: sun8i-h3: add pinmux definitions for I2C0-2
  dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
  dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
  dts: sun8i-h3: add pinmux definitions for UART2-3
  ARM: dts: sun9i: a80-optimus: Disable EHCI1
  ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
  ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
  ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
  ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
  ...

Merge tag 'usb-ci-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-testing

2016-09-15T08:38:30+00:00

Peter writes:

Most of them are refine patches, only new feature is
disable io watchdog for chipidea platform.

Merge tag 'usb-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2016-09-14T18:37:50+00:00

Felipe writes:

usb: patches for v4.9 merge window

This time around we have 92 non-merge commits. Most
of the changes are in drivers/usb/gadget (40.3%)
with drivers/usb/gadget/function being the most
active directory (27.2%).

As for UDC drivers, only dwc3 (26.5%) and dwc2
(12.7%) have really been active.

The most important changes for dwc3 are better
support for scatterlist and, again, throughput
improvements. While on dwc2 got some minor stability
fixes related to soft reset and FIFO usage.

Felipe Tonello has done some good work fixing up our
f_midi gadget and Tal Shorer has implemented a nice
API change for our ULPI bus.

Apart from these, we have our usual set of
non-critical fixes, spelling fixes, build warning
fixes, etc.

usb: dwc2: add support for Meson8b and GXBB SoCs

2016-09-14T18:18:52+00:00

Add compatible strings for amlogic Meson8b and GXBB SoCs with the
corresponding configuration parameters.

Signed-off-by: Jerome Brunet 
Signed-off-by: Martin Blumenstingl 
Acked-by: John Youn 
Signed-off-by: Kevin Hilman

doc: usb: ci-hdrc-usb2: add property over-current-active-high

2016-09-14T02:58:13+00:00

Adding over-current-active-high to indicate the over current flag
is high active as typically we use active low for over current
polarity.

Signed-off-by: Li Jun 
Signed-off-by: Peter Chen 
Acked-by: Rob Herring

doc: usb: usbmisc-imx: add imx7d compatible string

2016-09-14T02:58:13+00:00

Add compatible string for imx7d-usbmisc.

Acked-by: Rob Herring 
Signed-off-by: Li Jun 
Signed-off-by: Peter Chen

usb: dwc3: of-simple: add compatible for Cavium

2016-09-13T06:28:59+00:00

Add necessary compatible flag for Cavium's DWC3 so
dwc3-of-simple will probe.

Tested-by: Steven J. Hill 
Signed-off-by: Felipe Balbi

Documentation: devicetree: dwc2: Deprecate g-tx-fifo-size

2016-09-06T07:47:10+00:00

This property is not needed because the periodic fifos are not
configurable. So it was incorrect to add this property in the first
place.

Acked-by: Rob Herring 
Signed-off-by: John Youn 
Signed-off-by: Felipe Balbi

usb: renesas_usbhs: add a compatible string for r8a7796

2016-08-31T07:05:46+00:00

This patch adds support for r8a7796 (R-Car M3-W).

Acked-by: Geert Uytterhoeven 
Acked-by: Rob Herring 
Signed-off-by: Yoshihiro Shimoda 
Signed-off-by: Felipe Balbi