linux.git/Documentation/devicetree/bindings/usb, branch v4.3 Linux kernel source tree usb: renesas_usbhs: Add support for R-Car H3 2015-09-30T16:21:11+00:00 Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com 2015-09-29T09:21:19+00:00 f5f6afa85aa82a8ee59072f2d09f2b381f24c871 This patch adds a compatible string to support for R-Car H3. Since the HS-USB controller of R-Car H3 is almost the same specification with R-Car Gen2 (these have 16 pipes and usb-dmac), this patch sets the "type" of renesas_usbhs_driver_param to USBHS_TYPE_RCAR_GEN2. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
This patch adds a compatible string to support for R-Car H3.

Since the HS-USB controller of R-Car H3 is almost the same specification
with R-Car Gen2 (these have 16 pipes and usb-dmac), this patch
sets the "type" of renesas_usbhs_driver_param to USBHS_TYPE_RCAR_GEN2.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Documentation: bindings: add doc for zynq USB 2015-09-15T08:08:54+00:00 Nathan Sullivan nathan.sullivan@ni.com 2015-08-31T14:49:52+00:00 c1ceb5fff01c0357de0386f87a620a4636ca68d1 Document the binding for the zynq specific chipidea UDC binding. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> 
Document the binding for the zynq specific chipidea UDC binding.

Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Merge tag 'usb-ci-v4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next 2015-08-14T23:43:09+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2015-08-14T23:43:09+00:00 37a842d36f63a047d94be2603d40d4407c949f1b Peter writes: USB: chipidea updates for v4.3-rc1 The main changes are adding several system interfaces for tuning performance, and each vendors can adjust them according to their design configurations. Others are tiny improvements, like more well siTD supports, USB_DEVICE_A_HNP_SUPPORT supports, etc. 
Peter writes:

USB: chipidea updates for v4.3-rc1

The main changes are adding several system interfaces for
tuning performance, and each vendors can adjust them according
to their design configurations.

Others are tiny improvements, like more well siTD supports,
USB_DEVICE_A_HNP_SUPPORT supports, etc.
Doc: usb: ci-hdrc-usb2: add tx(rx)-burst-config-dword for binding doc 2015-08-14T02:03:57+00:00 Peter Chen peter.chen@freescale.com 2015-08-07T07:08:02+00:00 bd6e9d115df7fc6f11f3021c6fc05e3eaeb04a32 It is used to override the default setting for burst size, changing burst size takes effect only when the SBUSCFG.AHBBRST = 0. Signed-off-by: Peter Chen <peter.chen@freescale.com> 
It is used to override the default setting for burst size, changing
burst size takes effect only when the SBUSCFG.AHBBRST = 0.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Doc: usb: ci-hdrc-usb2: add ahb-burst-config for binding doc 2015-08-14T01:16:47+00:00 Peter Chen peter.chen@freescale.com 2015-07-28T05:33:15+00:00 c6fba7b750efe64a69dd83e0ff7249abd0e783aa It is used to change ahb burst configuration for platforms, it is vendor specific. Signed-off-by: Peter Chen <peter.chen@freescale.com> 
It is used to change ahb burst configuration for platforms, it is
vendor specific.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Doc: usb: ci-hdrc-usb2: add itc-setting at binding doc 2015-08-14T01:13:11+00:00 Peter Chen peter.chen@freescale.com 2015-07-15T05:53:05+00:00 1bd57127d4aaff518cf93f4809ec2f11b2baf865 It is used to configure the ITC (in register USBCMD) value for kinds of applications. Signed-off-by: Peter Chen <peter.chen@freescale.com> 
It is used to configure the ITC (in register USBCMD) value
for kinds of applications.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
usb: phy: msm: Add D+/D- lines route control 2015-07-30T16:43:36+00:00 Ivan T. Ivanov ivan.ivanov@linaro.org 2015-07-28T08:10:22+00:00 6f98f545b0b4effdf67e83e214a4eb13cd41fba2 apq8016-sbc board is using Dual SPDT USB Switch (TC7USB40MU), witch is controlled by GPIO to de/multiplex D+/D- USB lines to USB2513B Hub and uB connector. Add support for this. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com> 
apq8016-sbc board is using Dual SPDT USB Switch (TC7USB40MU),
witch is controlled by GPIO to de/multiplex D+/D- USB lines to
USB2513B Hub and uB connector. Add support for this.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
doc: dt-binding: usb: add otg related properties 2015-07-29T14:59:20+00:00 Li Jun jun.li@freescale.com 2015-07-09T07:18:43+00:00 b5513dede7c90ba2370ab5eb547568a22991907b Add otg version, srp, hnp and adp support for usb OTG port, then those OTG features don't have to be decided by usb gadget drivers. Signed-off-by: Li Jun <jun.li@freescale.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
Add otg version, srp, hnp and adp support for usb OTG port, then those OTG
features don't have to be decided by usb gadget drivers.

Signed-off-by: Li Jun <jun.li@freescale.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: musb: sunxi: Add support for musb controller in A33 SoC 2015-07-29T14:59:20+00:00 Hans de Goede hdegoede@redhat.com 2015-07-08T14:41:40+00:00 d91de093d94eca6e280e50c24b172ed598bb5724 The A33 SoC uses the same musb controller as found on the A31 and later, but allwinner has removed the configdata register, this commit adds special handling for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
The A33 SoC uses the same musb controller as found on the A31 and later,
but allwinner has removed the configdata register, this commit adds special
handling for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: musb: sunxi: Add support for musb controller in A31 SoC 2015-07-29T14:59:20+00:00 Hans de Goede hdegoede@redhat.com 2015-07-08T14:41:39+00:00 132e23775779cc895c37f7883c33a60a1a8a7cdd The A31 SoC uses the same musb controller as found in earlier SoCs, but it is hooked up slightly different. Its SRAM is private and no longer controlled through the SRAM controller, and its reset is controlled via a separate reset controller. This commit adds support for this setup. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
The A31 SoC uses the same musb controller as found in earlier SoCs, but it
is hooked up slightly different. Its SRAM is private and no longer controlled
through the SRAM controller, and its reset is controlled via a separate
reset controller. This commit adds support for this setup.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>