linux.git/Documentation/devicetree/bindings/timer, branch v3.10 Linux kernel source tree Merge tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2013-05-07T18:22:14+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-05-07T18:22:14+00:00 1bf25e78af317e6d5d9b5594dfeb0036e0d589d6 Pull ARM SoC late cleanups from Arnd Bergmann: "These are cleanups and smaller changes that either depend on earlier feature branches or came in late during the development cycle. We normally try to get all cleanups early, so these are the exceptions: - A follow-up on the clocksource reworks, hopefully the last time we need to merge clocksource subsystem changes through arm-soc. A first set of patches was part of the original 3.10 arm-soc cleanup series because of interdependencies with timer drivers now moved out of arch/arm. - Migrating the SPEAr13xx platform away from using auxdata for DMA channel descriptions towards using information in device tree, based on the earlier SPEAr multiplatform series - A few follow-ups on the Atmel SAMA5 support and other changes for Atmel at91 based on the larger at91 reworks. - Moving the armada irqchip implementation to drivers/irqchip - Several OMAP cleanups following up on the larger series already merged in 3.10." * tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: OMAP4: change the device names in usb_bind_phy ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a ARM: SPEAr: conditionalize SMP code ARM: arch_timer: Silence debug preempt warnings ARM: OMAP: remove unused variable serial: amba-pl011: fix !CONFIG_DMA_ENGINE case ata: arasan: remove the need for platform_data ARM: at91/sama5d34ek.dts: remove not needed compatibility string ARM: at91: dts: add MCI DMA support ARM: at91: dts: add i2c dma support ARM: at91: dts: set #dma-cells to the correct value ARM: at91: suspend both memory controllers on at91sam9263 irqchip: armada-370-xp: slightly cleanup irq controller driver irqchip: armada-370-xp: move IRQ handler to avoid forward declaration irqchip: move IRQ driver for Armada 370/XP ARM: mvebu: move L2 cache initialization in init_early() devtree: add binding documentation for sp804 ARM: integrator-cp: convert use CLKSRC_OF for timer init ARM: versatile: use OF init for sp804 timer ARM: versatile: add versatile dtbs to dtbs target ... 
Pull ARM SoC late cleanups from Arnd Bergmann:
 "These are cleanups and smaller changes that either depend on earlier
  feature branches or came in late during the development cycle.  We
  normally try to get all cleanups early, so these are the exceptions:

   - A follow-up on the clocksource reworks, hopefully the last time we
     need to merge clocksource subsystem changes through arm-soc.

     A first set of patches was part of the original 3.10 arm-soc
     cleanup series because of interdependencies with timer drivers now
     moved out of arch/arm.

   - Migrating the SPEAr13xx platform away from using auxdata for DMA
     channel descriptions towards using information in device tree,
     based on the earlier SPEAr multiplatform series

   - A few follow-ups on the Atmel SAMA5 support and other changes for
     Atmel at91 based on the larger at91 reworks.

   - Moving the armada irqchip implementation to drivers/irqchip

   - Several OMAP cleanups following up on the larger series already
     merged in 3.10."

* tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  ARM: OMAP4: change the device names in usb_bind_phy
  ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a
  ARM: SPEAr: conditionalize SMP code
  ARM: arch_timer: Silence debug preempt warnings
  ARM: OMAP: remove unused variable
  serial: amba-pl011: fix !CONFIG_DMA_ENGINE case
  ata: arasan: remove the need for platform_data
  ARM: at91/sama5d34ek.dts: remove not needed compatibility string
  ARM: at91: dts: add MCI DMA support
  ARM: at91: dts: add i2c dma support
  ARM: at91: dts: set #dma-cells to the correct value
  ARM: at91: suspend both memory controllers on at91sam9263
  irqchip: armada-370-xp: slightly cleanup irq controller driver
  irqchip: armada-370-xp: move IRQ handler to avoid forward declaration
  irqchip: move IRQ driver for Armada 370/XP
  ARM: mvebu: move L2 cache initialization in init_early()
  devtree: add binding documentation for sp804
  ARM: integrator-cp: convert use CLKSRC_OF for timer init
  ARM: versatile: use OF init for sp804 timer
  ARM: versatile: add versatile dtbs to dtbs target
  ...
Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2013-05-04T19:31:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-05-04T19:31:18+00:00 6fa52ed33bea997374a88dbacbba5bf8c7ac4fef Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ... 
Pull ARM SoC driver changes from Olof Johansson:
 "This is a rather large set of patches for device drivers that for one
  reason or another the subsystem maintainer preferred to get merged
  through the arm-soc tree.  There are both new drivers as well as
  existing drivers that are getting converted from platform-specific
  code into standalone drivers using the appropriate subsystem specific
  interfaces.

  In particular, we can now have pinctrl, clk, clksource and irqchip
  drivers in one file per driver, without the need to call into platform
  specific interface, or to get called from platform specific code, as
  long as all information about the hardware is provided through a
  device tree.

  Most of the drivers we touch this time are for clocksource.  Since now
  most of them are part of drivers/clocksource, I expect that we won't
  have to touch these again from arm-soc and can let the clocksource
  maintainers take care of these in the future.

  Another larger part of this series is specific to the exynos platform,
  which is seeing some significant effort in upstreaming and
  modernization of its device drivers this time around, which
  unfortunately is also the cause for the churn and a lot of the merge
  conflicts.

  There is one new subsystem that gets merged as part of this series:
  the reset controller interface, which is a very simple interface for
  taking devices on the SoC out of reset or back into reset.  Patches to
  use this interface on i.MX follow later in this merge window, and we
  are going to have other platforms (at least tegra and sirf) get
  converted in 3.11.  This will let us get rid of platform specific
  callbacks in a number of platform independent device drivers."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
  irqchip: s3c24xx: add missing __init annotations
  ARM: dts: Disable the RTC by default on exynos5
  clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
  ARM: exynos: restore mach/regs-clock.h for exynos5
  clocksource: exynos_mct: fix build error on non-DT
  pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
  irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
  reset: NULL deref on allocation failure
  reset: Add reset controller API
  dt: describe base reset signal binding
  ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
  ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
  ARM: EXYNOS: Enable PMUs for exynos4
  irqchip: exynos-combiner: Correct combined IRQs for exynos4
  irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: tegra: fix enum tegra114_clk to match binding
  ...
Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2013-05-02T16:28:03+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-05-02T16:28:03+00:00 dfab34aa61a0f8c14a67d7b4c1dae28e57ba592d Pull ARM SoC device-tree updates from Olof Johansson: "Part 1 of device-tree updates for 3.10. The bulk of the churn in this branch is due to i.MX moving from C-defined pin control over to device tree, which is a one-time conversion that will allow greater flexibility down the road. Besides that, there's PCI-e bindings for Marvell mvebu platforms and a handful of cleanups to tegra due to the new include file functionality of the device tree compiler" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (113 commits) arm: mvebu: PCIe Device Tree informations for Armada XP GP arm: mvebu: PCIe Device Tree informations for Armada 370 DB arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox arm: mvebu: PCIe Device Tree informations for Armada XP DB arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4 arm: mvebu: add PCIe Device Tree informations for Armada XP arm: mvebu: add PCIe Device Tree informations for Armada 370 ARM: sunxi: unify osc24M_fixed and osc24M arm: vt8500: Add SDHC support to WM8505 DT ARM: dts: Add a 64 bits version of the skeleton device tree ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board ARM: mvebu: Add support for NOR flash device on Armada XP-GP board ARM: mvebu: Add Device Bus support for Armada 370/XP SoC ARM: dts: imx6dl-wandboard: Add USB Host support ARM: dts: imx51 cpu node ARM: dts: Add missing imx27-phytec-phycore dtb target ARM: dts: Add NFC support for i.MX27 Phytec PCM038 module ARM: i.MX51: Add PATA support ARM: dts: Add initial support for Wandboard Dual-Lite ... 
Pull ARM SoC device-tree updates from Olof Johansson:
 "Part 1 of device-tree updates for 3.10.  The bulk of the churn in this
  branch is due to i.MX moving from C-defined pin control over to device
  tree, which is a one-time conversion that will allow greater
  flexibility down the road.

  Besides that, there's PCI-e bindings for Marvell mvebu platforms and a
  handful of cleanups to tegra due to the new include file functionality
  of the device tree compiler"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (113 commits)
  arm: mvebu: PCIe Device Tree informations for Armada XP GP
  arm: mvebu: PCIe Device Tree informations for Armada 370 DB
  arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox
  arm: mvebu: PCIe Device Tree informations for Armada XP DB
  arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4
  arm: mvebu: add PCIe Device Tree informations for Armada XP
  arm: mvebu: add PCIe Device Tree informations for Armada 370
  ARM: sunxi: unify osc24M_fixed and osc24M
  arm: vt8500: Add SDHC support to WM8505 DT
  ARM: dts: Add a 64 bits version of the skeleton device tree
  ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig
  ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board
  ARM: mvebu: Add support for NOR flash device on Armada XP-GP board
  ARM: mvebu: Add Device Bus support for Armada 370/XP SoC
  ARM: dts: imx6dl-wandboard: Add USB Host support
  ARM: dts: imx51 cpu node
  ARM: dts: Add missing imx27-phytec-phycore dtb target
  ARM: dts: Add NFC support for i.MX27 Phytec PCM038 module
  ARM: i.MX51: Add PATA support
  ARM: dts: Add initial support for Wandboard Dual-Lite
  ...
Merge tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux into late/clksrc 2013-04-17T17:10:01+00:00 Olof Johansson olof@lixom.net 2013-04-17T17:10:01+00:00 c3e0c873d0653e6e7628b5a8a9fcb3745444ca9e This is the 2nd part of ARM timer clean-ups for 3.10. This series has the following changes: - Add sched_clock selection logic to select the highest frequency clock - Use full 64-bit arch timer counter for sched_clock - Convert arch timer, sp804 and integrator-cp timers to CLKSRC_OF and adapt all users to use clocksource_of_init * tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux: devtree: add binding documentation for sp804 ARM: integrator-cp: convert use CLKSRC_OF for timer init ARM: versatile: use OF init for sp804 timer ARM: versatile: add versatile dtbs to dtbs target ARM: vexpress: remove extra timer-sp control register clearing ARM: dts: vexpress: disable CA9 core tile sp804 timer ARM: vexpress: remove sp804 OF init ARM: highbank: use OF init for sp804 timer ARM: timer-sp: convert to use CLKSRC_OF init OF: add empty of_device_is_available for !OF ARM: convert arm/arm64 arch timer to use CLKSRC_OF init ARM: make machine_desc->init_time default to clocksource_of_init ARM: arch_timer: use full 64-bit counter for sched_clock ARM: make sched_clock just call a function pointer ARM: sched_clock: allow changing to higher frequency counter Signed-off-by: Olof Johansson <olof@lixom.net> This has a nasty set of conflicts with the exynos MCT code, which was moved in a separate branch, and then fixed up when merged in, but still conflicts a bit here. It should have been sorted out by this merge though. 
This is the 2nd part of ARM timer clean-ups for 3.10. This series has
the following changes:

- Add sched_clock selection logic to select the highest frequency clock
- Use full 64-bit arch timer counter for sched_clock
- Convert arch timer, sp804 and integrator-cp timers to CLKSRC_OF and
adapt all users to use clocksource_of_init

* tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux:
  devtree: add binding documentation for sp804
  ARM: integrator-cp: convert use CLKSRC_OF for timer init
  ARM: versatile: use OF init for sp804 timer
  ARM: versatile: add versatile dtbs to dtbs target
  ARM: vexpress: remove extra timer-sp control register clearing
  ARM: dts: vexpress: disable CA9 core tile sp804 timer
  ARM: vexpress: remove sp804 OF init
  ARM: highbank: use OF init for sp804 timer
  ARM: timer-sp: convert to use CLKSRC_OF init
  OF: add empty of_device_is_available for !OF
  ARM: convert arm/arm64 arch timer to use CLKSRC_OF init
  ARM: make machine_desc->init_time default to clocksource_of_init
  ARM: arch_timer: use full 64-bit counter for sched_clock
  ARM: make sched_clock just call a function pointer
  ARM: sched_clock: allow changing to higher frequency counter

Signed-off-by: Olof Johansson <olof@lixom.net>

This has a nasty set of conflicts with the exynos MCT code, which was
moved in a separate branch, and then fixed up when merged in, but still
conflicts a bit here. It should have been sorted out by this merge though.
devtree: add binding documentation for sp804 2013-04-11T20:11:22+00:00 Haojian Zhuang haojian.zhuang@linaro.org 2013-03-13T05:05:34+00:00 69a517b2471bcd1c5a175aad82647c1e2c24f08b The sp804 binding is already in use by several platforms. This adds missing documentation for the binding and also extends the binding to handle some additional possible interrupt configurations. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com> 
The sp804 binding is already in use by several platforms. This adds missing
documentation for the binding and also extends the binding to handle some
additional possible interrupt configurations.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Merge tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers 2013-04-09T20:18:24+00:00 Arnd Bergmann arnd@arndb.de 2013-04-09T20:07:37+00:00 228e3023eb0430b4b9ed0736f8f87c96a6cd9c7a From Kukjin Kim <kgene.kim@samsung.com>: add support exynos mct device tree and move into drivers/clocksource * tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clocksource: mct: Add terminating entry for exynos_mct_ids table clocksource: mct: Add missing semicolons in exynos_mct.c ARM: EXYNOS: move mct driver to drivers/clocksource ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5 ARM: dts: add mct device tree node for all supported Exynos SoC's ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init ARM: EXYNOS: add device tree support for MCT controller driver ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it ARM: EXYNOS: add a register base address variable in mct controller driver Conflicts: drivers/clocksource/Makefile drivers/clocksource/exynos_mct.c [arnd: adapt to CLOCKSOURCE_OF_DECLARE interface change] Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
From Kukjin Kim <kgene.kim@samsung.com>:

add support exynos mct device tree and move into drivers/clocksource

* tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  clocksource: mct: Add terminating entry for exynos_mct_ids table
  clocksource: mct: Add missing semicolons in exynos_mct.c
  ARM: EXYNOS: move mct driver to drivers/clocksource
  ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5
  ARM: dts: add mct device tree node for all supported Exynos SoC's
  ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init
  ARM: EXYNOS: add device tree support for MCT controller driver
  ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it
  ARM: EXYNOS: add a register base address variable in mct controller driver

Conflicts:
	drivers/clocksource/Makefile
	drivers/clocksource/exynos_mct.c

[arnd: adapt to CLOCKSOURCE_OF_DECLARE interface change]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: i.MX: Add GPT devicetree Documentation 2013-04-09T14:52:52+00:00 Sascha Hauer s.hauer@pengutronix.de 2013-03-14T12:08:56+00:00 c21e5ca87400ceed04e7033a1848fda5d7e0e5f2 The GPT binding is already used on i.MX6 and i.MX25, but not yet documented. Add a binding document for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 
The GPT binding is already used on i.MX6 and i.MX25, but not yet
documented. Add a binding document for it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
clocksource: sunxi: Rename sunxi to sun4i 2013-04-08T19:42:11+00:00 Maxime Ripard maxime.ripard@free-electrons.com 2013-03-24T10:49:25+00:00 119fd635e383c1a58990e5805acc29f48ed3e360 During the introduction of the Allwinner SoC platforms, sunxi was initially meant as a generic name for all the variants of the Allwinner SoC. It was ok at the time of the support of only the A10 and A13 that looks pretty much the same, but it's beginning to be troublesome with the future addition of the Allwinner A31 (sun6i) that is quite different, and would introduce some weird logic, where sunxi would actually mean in some case sun4i and sun5i but without sun6i... Moreover, it makes the compatible strings naming scheme not consistent with other architectures, where usually for this kind of compability, we just use the oldest SoC name that has this IP, so let's do just this. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> 
During the introduction of the Allwinner SoC platforms, sunxi was
initially meant as a generic name for all the variants of the Allwinner
SoC.

It was ok at the time of the support of only the A10 and A13 that
looks pretty much the same, but it's beginning to be troublesome with
the future addition of the Allwinner A31 (sun6i) that is quite
different, and would introduce some weird logic, where sunxi would
actually mean in some case sun4i and sun5i but without sun6i...

Moreover, it makes the compatible strings naming scheme not consistent
with other architectures, where usually for this kind of compability, we
just use the oldest SoC name that has this IP, so let's do just this.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
arm: zynq: Move timer to generic location 2013-04-04T07:22:09+00:00 Michal Simek michal.simek@xilinx.com 2013-03-20T09:46:01+00:00 4f0f234fce1d263cc9881456352e8fd56ead0514 Move zynq timer out of mach folder to generic location and enable it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
Move zynq timer out of mach folder to generic location
and enable it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
ARM: EXYNOS: add device tree support for MCT controller driver 2013-03-09T07:01:52+00:00 Thomas Abraham thomas.abraham@linaro.org 2013-03-09T07:01:52+00:00 36ba5d527e9567ed303bad6e86a5f3c2723470f6 Allow the MCT controller base address and interrupts to be obtained from device tree and remove unused static definitions of these. The non-dt support for Exynos5250 is removed but retained for Exynos4210 based platforms. Cc: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 
Allow the MCT controller base address and interrupts to be
obtained from device tree and remove unused static definitions
of these. The non-dt support for Exynos5250 is removed but
retained for Exynos4210 based platforms.

Cc: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>