Pull tty/serial driver fixes from Greg KH:
 "Here are five small serial and tty and vt fixes for 6.16-rc4. Included
  in here are:

   - kerneldoc fixes for recent vt changes

   - imx serial driver fix

   - of_node sysfs fix for a regression

   - vt missing notification fix

   - 8250 dt bindings fix

  All of these have been in linux-next for a while with no reported issues"

* tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  dt-bindings: serial: 8250: Make clocks and clock-frequency exclusive
  serial: imx: Restore original RXTL for console to fix data loss
  serial: core: restore of_node information in sysfs
  vt: fix kernel-doc warnings in ucs_get_fallback()
  vt: add missing notification when switching back to text mode

Pull devicetree fixes from Rob Herring:

 - Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
   applied for nios2, but never sent upstream.

 - Fix extra '/' in fsl,ls1028a-reset '$id' path

 - Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.

* tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: serial: Convert altr,uart-1.0 to DT schema
  dt-bindings: serial: Convert altr,juart-1.0 to DT schema
  dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id
  dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings

The 8250 binding before converting to json-schema states,

  - clock-frequency : the input clock frequency for the UART
  	or
  - clocks phandle to refer to the clk used as per Documentation/devicetree

for clock-related properties, where "or" indicates these properties
shouldn't exist at the same time.

Additionally, the behavior of Linux's driver is strange when both clocks
and clock-frequency are specified: it ignores clocks and obtains the
frequency from clock-frequency, left the specified clocks unclaimed. It
may even be disabled, which is undesired most of the time.

But "anyOf" doesn't prevent these two properties from coexisting, as it
considers the object valid as long as there's at LEAST one match.

Let's switch to "oneOf" and disallows the other property if one exists,
precisely matching the original binding and avoiding future confusion on
the driver's behavior.

Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema")
Cc: stable <stable@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250623093445.62327-1-ziyao@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the Altera JTAG UART binding to DT schema. The "ALTR,uart-1.0"
compatible has long been deprecated, so drop it.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Convert the Altera JTAG UART binding to DT schema. The "ALTR,juart-1.0"
compatible has long been deprecated, so drop it.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Pull tty/serial updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.16-rc1.

  A little more churn than normal in this portion of the kernel for this
  development cycle, Jiri and Nicholas were busy with cleanups and
  reviews and fixes for the vt unicode handling logic which composed
  most of the overall work in here.

  Major changes are:

   - vt unicode changes/reverts/changes from Nicholas. This should help
     out a lot with screen readers and others that rely on vt console
     support

   - lock guard additions to the core tty/serial code to clean up lots
     of error handling logic

   - 8250 driver updates and fixes

   - device tree conversions to yaml

   - sh-sci driver updates

   - other small cleanups and updates for serial drivers and tty core
     portions

  All of these have been in linux-next for 2 weeks with no reported issues"

* tag 'tty-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (105 commits)
  tty: serial: 8250_omap: fix TX with DMA for am33xx
  vt: add VT_GETCONSIZECSRPOS to retrieve console size and cursor position
  vt: bracketed paste support
  vt: remove VT_RESIZE and VT_RESIZEX from vt_compat_ioctl()
  vt: process the full-width ASCII fallback range programmatically
  vt: make use of ucs_get_fallback() when glyph is unavailable
  vt: add ucs_get_fallback()
  vt: create ucs_fallback_table.h_shipped with gen_ucs_fallback_table.py
  vt: introduce gen_ucs_fallback_table.py to create ucs_fallback_table.h
  vt: move glyph determination to a separate function
  vt: make sure displayed double-width characters are remembered as such
  vt: ucs.c: fix misappropriate in_range() usage
  serial: max3100: Replace open-coded parity calculation with parity8()
  dt-bindings: serial: 8250_omap: Drop redundant properties
  dt-bindings: serial: Convert socionext,milbeaut-usio-uart to DT schema
  dt-bindings: serial: Convert microchip,pic32mzda-uart to DT schema
  dt-bindings: serial: Convert arm,sbsa-uart to DT schema
  dt-bindings: serial: Convert snps,arc-uart to DT schema
  dt-bindings: serial: Convert marvell,armada-3700-uart to DT schema
  dt-bindings: serial: Convert lantiq,asc to DT schema
  ...

The binding references in-kernel serial.yaml, so there is no need to
explicitly list its properties.  Note that rts-gpio is also redundant
because DTS should be simply converted to -gpios variants.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250514125127.56149-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the Socionext Milbeaut UART binding to DT schema. It is a
straight-forward conversion.

Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250507154924.1602842-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the Microchip PIC32 UART binding to DT schema. The binding was
unclear there are 3 interrupts. The functions were determined from the
driver. The 'cts-gpios' property is covered by serial.yaml schema.

Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507154937.1603190-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the Arm SBSA UART binding to DT schema. It is a straight-forward
conversion.

Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20250506220016.2545637-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>