linux.git/Documentation/devicetree/bindings/serial, branch v5.17 Linux kernel source tree Merge tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2022-01-13T00:47:05+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-01-13T00:47:05+00:00 4eb766f64d120f0b80ec24282df789b7db2ff838 Pull devicetree updates from Rob Herring: "Bindings: - DT schema conversions for Samsung clocks, RNG bindings, Qcom Command DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl, Tegra I2C and BPMP, pwm-vibrator, Arm DSU, and Cadence macb - DT schema conversions for Broadcom platforms: interrupt controllers, STB GPIO, STB waketimer, STB reset, iProc MDIO mux, iProc PCIe, Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON, SYSTEMPORT, AMAC, Northstar 2 PCIe PHY, GENET, moca PHY, GISB arbiter, and SATA - Add binding schemas for Tegra210 EMC table, TI DC-DC converters, - Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues - More fixes due to 'unevaluatedProperties' enabling - Data type fixes and clean-ups of binding examples found in preparation to move to validating DTB files directly (instead of intermediate YAML representation. - Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus - Add various new compatible strings DT core: - Silence a warning for overlapping reserved memory regions - Reimplement unittest overlay tracking - Fix stack frame size warning in unittest - Clean-ups of early FDT scanning functions - Fix handling of "linux,usable-memory-range" on EFI booted systems - Add support for 'fail' status on CPU nodes - Improve error message in of_phandle_iterator_next() - kbuild: Disable duplicate unit-address warnings for disabled nodes" * tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (114 commits) dt-bindings: net: mdio: Drop resets/reset-names child properties dt-bindings: clock: samsung: convert S5Pv210 to dtschema dt-bindings: clock: samsung: convert Exynos5410 to dtschema dt-bindings: clock: samsung: convert Exynos5260 to dtschema dt-bindings: clock: samsung: extend Exynos7 bindings with UFS dt-bindings: clock: samsung: convert Exynos7 to dtschema dt-bindings: clock: samsung: convert Exynos5433 to dtschema dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712 dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp' dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in example dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in example dt-bindings: clock: imx5: Drop clock consumer node from example dt-bindings: Drop required 'interrupt-parent' dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance' dt-bindings: net: wireless: mt76: Fix 8-bit property sizes dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry dt-bindings: net: stm32-dwmac: Make each example a separate entry dt-bindings: net: Cleanup MDIO node schemas ... 
Pull devicetree updates from Rob Herring:
 "Bindings:

   - DT schema conversions for Samsung clocks, RNG bindings, Qcom
     Command DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl,
     Tegra I2C and BPMP, pwm-vibrator, Arm DSU, and Cadence macb

   - DT schema conversions for Broadcom platforms: interrupt
     controllers, STB GPIO, STB waketimer, STB reset, iProc MDIO mux,
     iProc PCIe, Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON,
     SYSTEMPORT, AMAC, Northstar 2 PCIe PHY, GENET, moca PHY, GISB
     arbiter, and SATA

   - Add binding schemas for Tegra210 EMC table, TI DC-DC converters,

   - Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues

   - More fixes due to 'unevaluatedProperties' enabling

   - Data type fixes and clean-ups of binding examples found in
     preparation to move to validating DTB files directly (instead of
     intermediate YAML representation.

   - Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus

   - Add various new compatible strings

  DT core:

   - Silence a warning for overlapping reserved memory regions

   - Reimplement unittest overlay tracking

   - Fix stack frame size warning in unittest

   - Clean-ups of early FDT scanning functions

   - Fix handling of "linux,usable-memory-range" on EFI booted systems

   - Add support for 'fail' status on CPU nodes

   - Improve error message in of_phandle_iterator_next()

   - kbuild: Disable duplicate unit-address warnings for disabled nodes"

* tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (114 commits)
  dt-bindings: net: mdio: Drop resets/reset-names child properties
  dt-bindings: clock: samsung: convert S5Pv210 to dtschema
  dt-bindings: clock: samsung: convert Exynos5410 to dtschema
  dt-bindings: clock: samsung: convert Exynos5260 to dtschema
  dt-bindings: clock: samsung: extend Exynos7 bindings with UFS
  dt-bindings: clock: samsung: convert Exynos7 to dtschema
  dt-bindings: clock: samsung: convert Exynos5433 to dtschema
  dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
  dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes
  dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp'
  dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in example
  dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in example
  dt-bindings: clock: imx5: Drop clock consumer node from example
  dt-bindings: Drop required 'interrupt-parent'
  dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance'
  dt-bindings: net: wireless: mt76: Fix 8-bit property sizes
  dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema
  dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry
  dt-bindings: net: stm32-dwmac: Make each example a separate entry
  dt-bindings: net: Cleanup MDIO node schemas
  ...
Merge tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2022-01-12T19:21:52+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-01-12T19:21:52+00:00 342465f5337f7bd5b8bd3b6f939ac12b620cbb43 Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver updates for 5.17-rc1. Nothing major in here, just lots of good updates and fixes, including: - more tty core cleanups from Jiri as well as mxser driver cleanups. This is the majority of the core diffstat - tty documentation updates from Jiri - platform_get_irq() updates - various serial driver updates for new features and hardware - fifo usage for 8250 console, reducing cpu load a lot - LED fix for keyboards, long-time bugfix that went through many revisions - minor cleanups All have been in linux-next for a while with no reported problems" * tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits) serial: core: Keep mctrl register state and cached copy in sync serial: stm32: correct loop for dma error handling serial: stm32: fix flow control transfer in DMA mode serial: stm32: rework TX DMA state condition serial: stm32: move tx dma terminate DMA to shutdown serial: pl011: Drop redundant DTR/RTS preservation on close/open serial: pl011: Drop CR register reset on set_termios serial: pl010: Drop CR register reset on set_termios serial: liteuart: fix MODULE_ALIAS serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2" tty: goldfish: Use platform_get_irq() to get the interrupt serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2 tty: serial: meson: Drop the legacy compatible strings and clock code serial: pmac_zilog: Use platform_get_irq() to get the interrupt serial: bcm63xx: Use platform_get_irq() to get the interrupt serial: ar933x: Use platform_get_irq() to get the interrupt serial: vt8500: Use platform_get_irq() to get the interrupt serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt serial: pxa: Use platform_get_irq() to get the interrupt ... 
Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty/serial driver updates for 5.17-rc1.

  Nothing major in here, just lots of good updates and fixes, including:

   - more tty core cleanups from Jiri as well as mxser driver cleanups.
     This is the majority of the core diffstat

   - tty documentation updates from Jiri

   - platform_get_irq() updates

   - various serial driver updates for new features and hardware

   - fifo usage for 8250 console, reducing cpu load a lot

   - LED fix for keyboards, long-time bugfix that went through many
     revisions

   - minor cleanups

  All have been in linux-next for a while with no reported problems"

* tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
  serial: core: Keep mctrl register state and cached copy in sync
  serial: stm32: correct loop for dma error handling
  serial: stm32: fix flow control transfer in DMA mode
  serial: stm32: rework TX DMA state condition
  serial: stm32: move tx dma terminate DMA to shutdown
  serial: pl011: Drop redundant DTR/RTS preservation on close/open
  serial: pl011: Drop CR register reset on set_termios
  serial: pl010: Drop CR register reset on set_termios
  serial: liteuart: fix MODULE_ALIAS
  serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure
  Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2"
  tty: goldfish: Use platform_get_irq() to get the interrupt
  serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2
  tty: serial: meson: Drop the legacy compatible strings and clock code
  serial: pmac_zilog: Use platform_get_irq() to get the interrupt
  serial: bcm63xx: Use platform_get_irq() to get the interrupt
  serial: ar933x: Use platform_get_irq() to get the interrupt
  serial: vt8500: Use platform_get_irq() to get the interrupt
  serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt
  serial: pxa: Use platform_get_irq() to get the interrupt
  ...
Merge tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2022-01-10T16:32:37+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-01-10T16:32:37+00:00 bb4ed26e7e837ca3034d4105491436d54c430038 Pull RISC-V SoC updates from Arnd Bergmann: "Add support for StarFive JH7100 RISC-V SoC This adds support for the StarFive JH7100, including the necessary device drivers and DT files for the BeagleV Starlight prototype board, with additional boards to be added later. This SoC promises to be the first usable low-cost platform for RISC-V. I've taken this through the SoC tree in the anticipation of adding a few other Arm based SoCs as well, but those did not pass the review in time, so it's only this one" * tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: reset: starfive-jh7100: Fix 32bit compilation RISC-V: Add BeagleV Starlight Beta device tree RISC-V: Add initial StarFive JH7100 device tree serial: 8250_dw: Add StarFive JH7100 quirk dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts pinctrl: starfive: Add pinctrl driver for StarFive SoCs dt-bindings: pinctrl: Add StarFive JH7100 bindings dt-bindings: pinctrl: Add StarFive pinctrl definitions reset: starfive-jh7100: Add StarFive JH7100 reset driver dt-bindings: reset: Add Starfive JH7100 reset bindings dt-bindings: reset: Add StarFive JH7100 reset definitions clk: starfive: Add JH7100 clock generator driver dt-bindings: clock: starfive: Add JH7100 bindings dt-bindings: clock: starfive: Add JH7100 clock definitions dt-bindings: interrupt-controller: Add StarFive JH7100 plic dt-bindings: timer: Add StarFive JH7100 clint RISC-V: Add StarFive SoC Kconfig option 
Pull RISC-V SoC updates from Arnd Bergmann:
 "Add support for StarFive JH7100 RISC-V SoC

  This adds support for the StarFive JH7100, including the necessary
  device drivers and DT files for the BeagleV Starlight prototype board,
  with additional boards to be added later. This SoC promises to be the
  first usable low-cost platform for RISC-V.

  I've taken this through the SoC tree in the anticipation of adding a
  few other Arm based SoCs as well, but those did not pass the review in
  time, so it's only this one"

* tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  reset: starfive-jh7100: Fix 32bit compilation
  RISC-V: Add BeagleV Starlight Beta device tree
  RISC-V: Add initial StarFive JH7100 device tree
  serial: 8250_dw: Add StarFive JH7100 quirk
  dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts
  pinctrl: starfive: Add pinctrl driver for StarFive SoCs
  dt-bindings: pinctrl: Add StarFive JH7100 bindings
  dt-bindings: pinctrl: Add StarFive pinctrl definitions
  reset: starfive-jh7100: Add StarFive JH7100 reset driver
  dt-bindings: reset: Add Starfive JH7100 reset bindings
  dt-bindings: reset: Add StarFive JH7100 reset definitions
  clk: starfive: Add JH7100 clock generator driver
  dt-bindings: clock: starfive: Add JH7100 bindings
  dt-bindings: clock: starfive: Add JH7100 clock definitions
  dt-bindings: interrupt-controller: Add StarFive JH7100 plic
  dt-bindings: timer: Add StarFive JH7100 clint
  RISC-V: Add StarFive SoC Kconfig option
dt-bindings: serial: renesas,sci: Document RZ/V2L SoC 2021-12-30T12:26:10+00:00 Biju Das biju.das.jz@bp.renesas.com 2021-12-21T09:47:08+00:00 a359101c7c6404d917a19d52133305ea284a0197 Add SCI binding documentation for Renesas RZ/V2L SoC. No driver changes are required as generic compatible string "renesas,sci" will be used as a fallback. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211221094717.16187-8-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add SCI binding documentation for Renesas RZ/V2L SoC. No driver changes
are required as generic compatible string "renesas,sci" will be used as
a fallback.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211221094717.16187-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dt-bindings: serial: renesas,scif: Document RZ/V2L SoC 2021-12-30T12:25:44+00:00 Biju Das biju.das.jz@bp.renesas.com 2021-12-21T09:47:07+00:00 b0c86a6083229db0518e2754b2b6298e40e8d637 Add SCIF binding documentation for Renesas RZ/V2L SoC. SCIF block on RZ/V2L is identical to one found on the RZ/G2L SoC. No driver changes are required as RZ/G2L compatible string "renesas,scif-r9a07g044" will be used as a fallback. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211221094717.16187-7-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add SCIF binding documentation for Renesas RZ/V2L SoC. SCIF block on RZ/V2L
is identical to one found on the RZ/G2L SoC. No driver changes are required
as RZ/G2L compatible string "renesas,scif-r9a07g044" will be used as a
fallback.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211221094717.16187-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dt-bindings: serial: amlogic, meson-uart: support S4 2021-12-21T08:18:49+00:00 Xianwei Zhao xianwei.zhao@amlogic.com 2021-12-21T03:01:45+00:00 34de6666843d47a4564f540574402f621c689ea0 Add serial bindings support menson S4 SoC family. Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> Link: https://lore.kernel.org/r/20211221030146.522-1-xianwei.zhao@amlogic.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add serial bindings support menson S4 SoC family.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20211221030146.522-1-xianwei.zhao@amlogic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dt-bindings: serial: fsl-lpuart: Fix i.MX 8QM compatible matching 2021-12-17T17:00:55+00:00 Abel Vesa abel.vesa@nxp.com 2021-12-16T18:48:05+00:00 e5ce127e5f7bc0afee21e9363a2aa415c1a32a36 The i.MX 8QM DTS files use two compatibles, so update the binding to fix dtbs_check warnings like: arch/arm64/boot/dts/freescale/imx8qm-mek.dt.yaml: serial@5a060000: compatible: ['fsl,imx8qm-lpuart', 'fsl,imx8qxp-lpuart'] is too long Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1639680494-23183-2-git-send-email-abel.vesa@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The i.MX 8QM DTS files use two compatibles, so update the binding to fix
dtbs_check warnings like:

  arch/arm64/boot/dts/freescale/imx8qm-mek.dt.yaml: serial@5a060000:
    compatible: ['fsl,imx8qm-lpuart', 'fsl,imx8qxp-lpuart'] is too long

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1639680494-23183-2-git-send-email-abel.vesa@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dt-bindings: serial: fsl-lpuart: add i.MXRT1050 compatible 2021-12-17T17:00:05+00:00 Jesse Taube mr.bossman075@gmail.com 2021-12-15T22:05:35+00:00 9629eeb0b191f1b3f9f136f0ececd71994534be0 Add i.MXRT1050 documentation for compatible string. Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Link: https://lore.kernel.org/r/20211215220538.4180616-7-Mr.Bossman075@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add i.MXRT1050 documentation for compatible string.

Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Link: https://lore.kernel.org/r/20211215220538.4180616-7-Mr.Bossman075@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dt-bindings: serial: renesas,scif: Document r8a779f0 bindings 2021-12-17T16:56:03+00:00 Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com 2021-12-09T07:08:16+00:00 6aa7cee60c3e10c77240aad7136629f207005ee2 R-Car S4-8 (R8A779F0) SoC has the R-Car Gen4 compatible SCIF ports, so document the SoC specific bindings. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20211209070817.1223888-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
R-Car S4-8 (R8A779F0) SoC has the R-Car Gen4 compatible SCIF ports,
so document the SoC specific bindings.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20211209070817.1223888-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dt-bindings: serial: Document Tegra234 TCU 2021-12-17T13:58:05+00:00 Thierry Reding treding@nvidia.com 2021-11-19T14:38:39+00:00 cd1fe47862c71994390e810182785a4f4d371875 Add the compatible string for the TCU found on the Tegra234 SoC. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> 
Add the compatible string for the TCU found on the Tegra234 SoC.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>