Pull ARM SoC 64-bit changes from Olof Johansson: "Here's our branch of ARM64 contents for this merge window. Most of this is DT contents for new SoCs (or those who have seen new device support added). Maybe we should stop separating out the arm64 contents here to avoid the kind of internal conflicts as we got this time around, where 32- and 64-bit contents conflicted. Anyhow, on the actual contents: New SoCs: - Broadcom North Star 2 (ns2) - Marvell Berlin4CT - Mediatek MT6795 - Rockchip RK3368 In addition, there are enhancements for the following platforms: - Mediatek MT8173: cpuidle-dt updates, misc other additions - ZyncMP: A bunch of devices added to the existing DTSI - Qualcomm MSM8916 and APQ8016 updates for USB, etc. + a handful of other updates for various platforms" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (47 commits) ARM64: dts: vexpress: Use assigned-clock-parents for sp810 ARM64: dts: mt6795: enable basic SMP bringup for MT6795 arm64: Enable Marvell Berlin SoC family in defconfig arm64: Enable Marvell Berlin SoC family in Kconfig arm64: dts: Add dts files for Marvell Berlin4CT SoC ARM64: zynqmp: Move SPI nodes to the right location ARM64: zynqmp: Move uart and ttcs to the right location ARM64: zynqmp: Enable spi flashes on ep108 ARM64: zynqmp: Add eeprom memories on i2c bus ARM64: zynqmp: Enable sdhci on ep108 ARM64: zynqmp: Enable watchdog on ep108 ARM64: zynqmp: Add DWC3 usb support ARM64: zynqmp: Add SMMU support ARM64: zynqmp: Add CANs node for platform ARM64: zynqmp: Use zynqmp specific compatible string for gpio devicetree: xilinx: zynqmp: add sata node PCI: iproc: Fix BCMA dependency in Kconfig arm64: dts: Add Broadcom North Star 2 support arm64: Add Broadcom iProc family support PCI: iproc: Fix ARM64 dependency in Kconfig ...
Pull ARM DT updates from Olof Johansson: "Ladies and gentlemen, we proudly announce to you the latest branch of ARM device tree contents for the mainline kernel. Come and see, come and see! No less than twentythree thousand lines of additions! Just imagine the joy you will have of using your mainline kernel on newly supported hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or UniPhier hardware! For those of you feeling less adventurous, added hardware support on platforms such as TI DM814x and Gumstix Overo platforms might be more of your liking. We've got something for everyone here! Ahem. Cough. So, anyway... This is the usual large batch of DT updates. Lots and lots of smaller changes, some of the larger ones to point out are: - Rockchip veyron (Chromebook) support, as well as several other new boards - DRM support on Atmel AT91SAM9N12EK - USB additions on some Allwinner platforms - Mediatek MT6580 support - Freescale i.MX6UL support - cleanups for Renesas shmobile platforms - lots of added devices on LPC18xx - lots of added devices and boards on UniPhier There's also some dependent code added here, in particular some branches that are primarily merged through the clock tree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits) ARM: tegra: Add gpio-ranges property ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114 ARM: tegra: Add Tegra124 PMU support ARM: tegra: jetson-tk1: Add GK20A GPU DT node ARM: tegra: venice2: Add GK20A GPU DT node ARM: tegra: Add IOMMU node to GK20A ARM: tegra: Add CPU regulator to the Jetson TK1 device tree ARM: tegra: Add entries for cpufreq on Tegra124 ARM: tegra: Enable the DFLL on the Jetson TK1 ARM: tegra: Add the DFLL to Tegra124 device tree ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller. ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes ARM: dts: rockchip: correct regulator power states for suspend ARM: dts: rockchip: correct regulator PM properties ARM: dts: vexpress: Use assigned-clock-parents for sp810 pinctrl: tegra: Only set the gpio range if needed arm: boot: dts: am4372: add ARM timers and SCU nodes ARM: dts: AM4372: Add the am4372-rtc compatible string ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain ...
In order to use the mctrl_gpio helpers, we change the DT bindings: ri-gpios renamed to rng-gpios. cd-gpios renamed to dcd-gpios. However, no in-tree dts/dtsi specifies these, so no worries. Signed-off-by: Niklas Cassel <nks@flawful.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a new DT property, "atmel,fifo-size", to enable and set the maximum number of data the RX and TX FIFOs can store on FIFO capable USARTs. Please be aware that the VERSION register can not be used to guess the size of FIFOs. Indeed, for a given hardware version, the USARTs can be integrated on Atmel SoCs with different FIFO sizes. Also the "atmel,fifo-size" property is optional as older USARTs don't embed FIFO at all. Besides, the FIFO size can not be read or guessed from other registers: When designing the FIFO feature, no dedicated registers were added to store this size. Unsed spaces in the I/O register range are limited and better reserved for future usages. Instead, the FIFO size of each peripheral is documented in the programmer datasheet. Finally, on a given SoC, there can be several instances of USART with different FIFO sizes. This explain why we'd rather use a dedicated DT property than use the "compatible" property. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to Advisory 21 as documented in AM437x errata document, UART module cannot be disabled once DMA is used. The only workaround is to softreset the module before disabling it. DRA7x UARTs are compatible to AM437x UARTs in terms of this errata and prescribed workaround. Enable usage of workaround for this errata on DRA7x SoCs. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use of of_machine_is_compatible() for handling AM335x specific "DMA kick" quirk in 8250_omap driver makes it ugly to extend the quirk for other platforms. Instead use a new compatible. The new compatible will also make it easier to take care of other quirks on AM335x and like SoCs. In order to not break backward DTB compatibility for users of 8250_omap driver on AM335x based boards, existing use of of_machine_is_compatible() has not been removed. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The compatible "ti,am4372-uart" is used in arch/arm/boot/dts/am4372.dtsi but not documented. Add necessary documentation. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds DT binding documentation for Mediatek MT6795. Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This adds a DT binding documentation for the MT6580 SoC from Mediatek. Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Pull MIPS updates from Ralf Baechle: - Improvements to the tlb_dump code - KVM fixes - Add support for appended DTB - Minor improvements to the R12000 support - Minor improvements to the R12000 support - Various platform improvments for BCM47xx - The usual pile of minor cleanups - A number of BPF fixes and improvments - Some improvments to the support for R3000 and DECstations - Some improvments to the ATH79 platform support - A major patchset for the JZ4740 SOC adding support for the CI20 platform - Add support for the Pistachio SOC - Minor BMIPS/BCM63xx platform support improvments. - Avoid "SYNC 0" as memory barrier when unlocking spinlocks - Add support for the XWR-1750 board. - Paul's __cpuinit/__cpuinitdata cleanups. - New Malta CPU board support large memory so enable ZONE_DMA32. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits) MIPS: spinlock: Adjust arch_spin_lock back-off time MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA MIPS: BCM47xx: Simplify handling SPROM revisions MIPS: Cobalt Don't use module_init in non-modular MTD registration. MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/ MIPS: use for_each_sg() MIPS: BCM47xx: Don't select BCMA_HOST_PCI MIPS: BCM47xx: Add helper variable for storing NVRAM length MIPS: IRQ/IP27: Move IRQ allocation API to platform code. MIPS: Replace smp_mb with release barrier function in unlocks. MIPS: i8259: DT support MIPS: Malta: Basic DT plumbing MIPS: include errno.h for ENODEV in mips-cm.h MIPS: Define GCR_GIC_STATUS register fields MIPS: BPF: Introduce BPF ASM helpers MIPS: BPF: Use BPF register names to describe the ABI MIPS: BPF: Move register definition to the BPF header MIPS: net: BPF: Replace RSIZE with SZREG MIPS: BPF: Free up some callee-saved registers MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers ...