Pull TTY / serial driver updates from Greg KH:
 "Here is the "big" set of tty and serial driver updates for 7.3-rc1.

  Not really all that much happened this development cycle for this
  subsystem, changes in here are:

   - removal of the ipwireless driver as it's no longer used or needed

   - new 8250_mxpcie driver added

   - qcom serial driver updates and additions

   - vt mode validation addition

   - lots of other small serial driver updates and additions

  All of these have been in linux-next for weeks with no reported issues"

* tag 'tty-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (97 commits)
  serial: imx: serialize imx_uart_ports[] lifetime
  tty: clear cdev pointer after cdev_add() failure
  tty: skip cdev_del() when no cdev is registered
  serial: core: clear freed pointers on uart_register_driver() failure
  serial: core: do fallible allocations before the console can be registered
  serial: 8250_mxpcie: implement rx_trig_bytes callbacks via MUEx50 RTL
  serial: 8250_mxpcie: introduce per-port private data structure
  serial: 8250: allow UART drivers to override rx_trig_bytes handling
  serial: 8250_mxpcie: add break support for RS485 using MUEx50 features
  serial: 8250: allow low-level drivers to override break control
  serial: 8250_mxpcie: support serial interface mode switching
  serial: 8250_mxpcie: speed up TX using memory-mapped FIFO window
  serial: 8250_mxpcie: speed up RX using memory-mapped FIFO window
  serial: 8250_mxpcie: add custom handle_irq callback
  serial: 8250_mxpcie: offload XON/XOFF flow control to MUEx50 hardware
  serial: 8250_mxpcie: enable automatic RTS/CTS flow control
  serial: 8250_mxpcie: enable enhanced mode and program FIFO trigger levels
  serial: 8250: add Moxa MUEx50 UART port type
  serial: 8250: split Moxa PCIe serial board support out of 8250_pci
  serial: qcom-geni: Use geni_se_set_perf_level() for baud rate perf level
  ...

The AST2600 and AST2700 VUART controllers are identical to the AST2500
VUART controller.

Add the "aspeed,ast2600-vuart" and "aspeed,ast2700-vuart" compatible
strings and fall back to "aspeed,ast2500-vuart" for compatibility with
the existing driver.

Signed-off-by: Yu-Che Hsieh <yc_hsieh@aspeedtech.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260721-upstream-ast2700-vuart-support-v1-1-b4ed612b1aa2@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Google Tensor G5 SoC (known as "laguna" and canonically written in
code as "lga") has a UART based on Designware IP. The UART appears to
work reasonably well, at least for serial console, with the existing
driver in Linux. Add a compatible for this UART based on the canonical
"lga" name for this SoC with a fallback to the existing
"snps,dw-apb-uart".

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260722-contrib-pg-pixel10-initial-dts-v2-2-3abae9717feb@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the compatible for the UARTs of the Rockchip RV1106, which are
compatible with the Synopsys DesignWare APB UART.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260714132035.v2.1.c1d92213393f49330ec14d0c670a802181b4fcbf@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The MAX310x is a family of one- (max3107, max3108), two- (max3109) and
four-channel (max14830) UARTs. The binding pulls in
/schemas/serial/rs485.yaml at the chip level, describing a single set of
RS-485 properties - enough for the single-channel parts, but a
multi-channel chip can wire RS-485 differently on each channel.

Split the binding per compatible:

 - single-channel parts (max3107, max3108): the chip node is itself the
   serial port and carries the RS-485 properties, as before;

 - multi-channel parts (max3109, max14830): the chip node is only a
   container and is no longer a serial node; each channel is a "serial@N"
   subnode that carries the standard serial.yaml/rs485.yaml properties
   (and may host a serial slave device). max3109 has channels 0-1,
   max14830 has 0-3.

This avoids a chip node that is simultaneously a serial node and the
parent of serial nodes. The driver still reads chip-level RS-485 for
single-channel and legacy device trees, so existing users are unaffected.

Signed-off-by: Tapio Reijonen <tapio.reijonen@vaisala.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260615-b4-max310x-rs485-dt-v3-2-7e79f064bdd7@vaisala.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no use of double colon '::' in YAML. OTOH, the literal style
block, e.g. using '|' treats all characters as content [1] therefore
single use of ':' in descriptions is perfectly fine, whenever '|' is
used.

Cleanup existing code, so the confusing style won't be re-used in new
contributions.

Link: https://yaml.org/spec/1.2.2/#literal-style [1]
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260623054842.21831-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

The plain text binding file was superseded by the YAML schema in
commit d50f974c4f7f ("dt-bindings: serial: Convert rs485 bindings
to json-schema"). The file now contains only a redirect notice.
Remove it, and update references in serial_core.c and
serial-rs485.rst to point to the YAML schema.

Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260521162137.6325-1-akash.sukhavasi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UltraRISC DP1000 integrates a Synopsys DesignWare APB UART, but it does
not provide the standard CPR and UCV registers.

Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260429-ultrarisc-serial-v7-3-e475cce9e274@ultrarisc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Document QUP GENI UART controller on Qualcomm Nord SA8797P SoC which is
compatible with SA8255P controller.

Signed-off-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427010114.230341-1-shengchao.guo@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull tty/serial updates from Greg KH:
 "Here is the set of tty and serial driver changes for 7.1-rc1.

  Not much here this cycle, biggest thing is the removal of an old
  driver that never got any actual hardware support (esp32), and the
  second try to moving the tty ports to their own workqueues (first try
  was in 7.0-rc1 but was reverted due to problems)

  Otherwise it's just a small set of driver updates and some vt modifier
  key enhancements.

  All have been in linux-next for a while with no reported issues"

* tag 'tty-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (35 commits)
  tty: serial: ip22zilog: Fix section mispatch warning
  hvc/xen: Check console connection flag
  serial: sh-sci: Add support for RZ/G3L RSCI
  dt-bindings: serial: renesas,rsci: Document RZ/G3L SoC
  tty: atmel_serial: update outdated reference to atmel_tasklet_func()
  serial: xilinx_uartps: Drop unused include
  serial: qcom-geni: drop stray newline format specifier
  serial: 8250: loongson: Enable building on MIPS Loongson64
  dt-bindings: serial: 8250: Add Loongson 3A4000 uart compatible
  serial: 8250_fintek: Add support for F81214E
  tty: tty_port: add workqueue to flip TTY buffer
  vt: support ITU-T T.416 color subparameters
  serial: qcom-geni: Fix RTS behavior with flow control
  tty: serial: imx: keep dma request disabled before dma transfer setup
  tty: serial: 8250: Add SystemBase Multi I/O cards
  serial: pic32_uart: allow driver to be compiled on all architectures with COMPILE_TEST
  serial: tegra: remove Kconfig dependency on APB DMA controller
  dt-bindings: serial: amlogic,meson-uart: Add compatible string for A9
  dt-bindings: serial: atmel,at91-usart: add microchip,lan9691-usart
  serial: auart: check clk_enable() return in console write
  ...