linux.git/Documentation/devicetree/bindings/rtc, branch v4.8 Linux kernel source tree powerpc: Various typo fixes 2016-06-14T03:58:26+00:00 Michael Ellerman mpe@ellerman.id.au 2016-06-01T06:34:37+00:00 027dfac694fc27ef0273afb810d9b1f9da57d6e1 Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Merge tag 'rtc-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux 2016-05-21T17:42:11+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-05-21T17:42:11+00:00 63d222b9d277c4d7bf08afd1631a7f8e327a825c Pull RTC updates from Alexandre Belloni: "Subsystem wide cleanups: - Use IS_ENABLED() instead of checking for built-in or module - remove useless DRV_VERSION - remove CLK_IS_ROOT - remove UIE signaling Drivers: - ds1302: rewritten to be a proper SPI device driver - m41t80: huge cleanup, alarm, wakelarm ans oscialltor failure detection support - rv3029: switch to regmap to handle rv3049, alarm support, fixes - zynqmp: enable switching to battery power, fixes - small fixes for at91sam9, da9053, ds1307, ds1685, ds3232, r2025, sa1100, snvs, stmp3xxx, tps6586x" * tag 'rtc-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits) rtc: tps6586x: rename so module can be autoloaded rtc: rv3029: hide unused i2c device table rtc: rs5c372: r2025: fix check for 'oscillator halted' condition rtc: rv3029: add alarm IRQ rtc: rv3029: fix set_time function rtc: rv3029: fix alarm support rtc: rv3029: Remove some checks and warnings rtc: rv3029: Add support of RV3049 rtc: rv3029: convert to use regmap rtc: rv3029: remove 'i2c' in functions names rtc: stmp3xxx: print message on error rtc: Use IS_ENABLED() instead of checking for built-in or module rtc: ds3232: fix call trace when rtc->ops_lock is used as NULL rtc: snvs: return error in case enable_irq_wake fails rtc: zynqmp: Update seconds time programming logic rtc: sa1100: DT spelling s/interrupt-name/interrupt-names/ rtc: mc13xxx: remove UIE signaling rtc: mxc: remove UIE signaling rtc: ds1307: Remove CLK_IS_ROOT rtc: hym8563: Remove CLK_IS_ROOT ... 
Pull RTC updates from Alexandre Belloni:
 "Subsystem wide cleanups:
   - Use IS_ENABLED() instead of checking for built-in or module
   - remove useless DRV_VERSION
   - remove CLK_IS_ROOT
   - remove UIE signaling

  Drivers:
   - ds1302: rewritten to be a proper SPI device driver
   - m41t80: huge cleanup, alarm, wakelarm ans oscialltor failure
     detection support
   - rv3029: switch to regmap to handle rv3049, alarm support, fixes
   - zynqmp: enable switching to battery power, fixes
   - small fixes for at91sam9, da9053, ds1307, ds1685, ds3232, r2025,
     sa1100, snvs, stmp3xxx, tps6586x"

* tag 'rtc-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits)
  rtc: tps6586x: rename so module can be autoloaded
  rtc: rv3029: hide unused i2c device table
  rtc: rs5c372: r2025: fix check for 'oscillator halted' condition
  rtc: rv3029: add alarm IRQ
  rtc: rv3029: fix set_time function
  rtc: rv3029: fix alarm support
  rtc: rv3029: Remove some checks and warnings
  rtc: rv3029: Add support of RV3049
  rtc: rv3029: convert to use regmap
  rtc: rv3029: remove 'i2c' in functions names
  rtc: stmp3xxx: print message on error
  rtc: Use IS_ENABLED() instead of checking for built-in or module
  rtc: ds3232: fix call trace when rtc->ops_lock is used as NULL
  rtc: snvs: return error in case enable_irq_wake fails
  rtc: zynqmp: Update seconds time programming logic
  rtc: sa1100: DT spelling s/interrupt-name/interrupt-names/
  rtc: mc13xxx: remove UIE signaling
  rtc: mxc: remove UIE signaling
  rtc: ds1307: Remove CLK_IS_ROOT
  rtc: hym8563: Remove CLK_IS_ROOT
  ...
Merge tag 'devicetree-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2016-05-20T21:51:34+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-05-20T21:51:34+00:00 e7f44b65b532040ac90b73b60ea0b629742ced33 Pull devicetree updates from Rob Herring: - Rewrite of the unflattening code to avoid recursion and lessen the stack usage. - Rewrite of the phandle args parsing code to get rid of the fixed args size. This is needed for IOMMU code. - Sync to latest dtc which adds more dts style checking. These warnings are enabled with "W=1" compiles. - Tegra documentation updates related to the above warnings. - A bunch of spelling and other doc fixes. - Various vendor prefix additions. * tag 'devicetree-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (52 commits) devicetree: Add Creative Technology vendor id gpio: dt-bindings: add ibm,ppc4xx-gpio binding of/unittest: Remove unnecessary module.h header inclusion drivers/of: Fix build warning in populate_node() drivers/of: Fix depth when unflattening devicetree of: dynamic: changeset prop-update revert fix drivers/of: Export of_detach_node() drivers/of: Return allocated memory from of_fdt_unflatten_tree() drivers/of: Specify parent node in of_fdt_unflatten_tree() drivers/of: Rename unflatten_dt_node() drivers/of: Avoid recursively calling unflatten_dt_node() drivers/of: Split unflatten_dt_node() of: include errno.h in of_graph.h of: document refcount incrementation of of_get_cpu_node() Documentation: dt: soc: fix spelling mistakes Documentation: dt: power: fix spelling mistake Documentation: dt: pinctrl: fix spelling mistake Documentation: dt: opp: fix spelling mistake Documentation: dt: net: fix spelling mistakes Documentation: dt: mtd: fix spelling mistake ... 
Pull devicetree updates from Rob Herring:

 - Rewrite of the unflattening code to avoid recursion and lessen the
   stack usage.

 - Rewrite of the phandle args parsing code to get rid of the fixed args
   size.  This is needed for IOMMU code.

 - Sync to latest dtc which adds more dts style checking.  These
   warnings are enabled with "W=1" compiles.

 - Tegra documentation updates related to the above warnings.

 - A bunch of spelling and other doc fixes.

 - Various vendor prefix additions.

* tag 'devicetree-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (52 commits)
  devicetree: Add Creative Technology vendor id
  gpio: dt-bindings: add ibm,ppc4xx-gpio binding
  of/unittest: Remove unnecessary module.h header inclusion
  drivers/of: Fix build warning in populate_node()
  drivers/of: Fix depth when unflattening devicetree
  of: dynamic: changeset prop-update revert fix
  drivers/of: Export of_detach_node()
  drivers/of: Return allocated memory from of_fdt_unflatten_tree()
  drivers/of: Specify parent node in of_fdt_unflatten_tree()
  drivers/of: Rename unflatten_dt_node()
  drivers/of: Avoid recursively calling unflatten_dt_node()
  drivers/of: Split unflatten_dt_node()
  of: include errno.h in of_graph.h
  of: document refcount incrementation of of_get_cpu_node()
  Documentation: dt: soc: fix spelling mistakes
  Documentation: dt: power: fix spelling mistake
  Documentation: dt: pinctrl: fix spelling mistake
  Documentation: dt: opp: fix spelling mistake
  Documentation: dt: net: fix spelling mistakes
  Documentation: dt: mtd: fix spelling mistake
  ...
rtc: sa1100: DT spelling s/interrupt-name/interrupt-names/ 2016-05-20T10:33:51+00:00 Geert Uytterhoeven geert+renesas@glider.be 2016-04-20T15:32:18+00:00 01dc6992b3e888e7bf17691e4e86c9cc33e8f8b5 Fix typo in interrupt-names Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> 
Fix typo in interrupt-names

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
rtc: ds1302: rewrite using SPI 2016-05-20T10:33:51+00:00 Sergey Yanovich ynvich@gmail.com 2016-02-23T10:54:57+00:00 d25a5ed37d5fdd25f3cfbffc2f9a0f62e58f884c DS1302 is an half-duplex SPI device. The driver respects this fact now. Pin configurations should be implemented using SPI subsystem. Signed-off-by: Sergei Ianovich <ynvich@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> 
DS1302 is an half-duplex SPI device. The driver respects this fact now.
Pin configurations should be implemented using SPI subsystem.

Signed-off-by: Sergei Ianovich <ynvich@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Documentation: bindings: fix palmas-rtc documentation 2016-04-25T13:38:45+00:00 Dr. H. Nikolaus Schaller hns@goldelico.com 2016-04-21T16:03:15+00:00 3b56727105a2605240a62acfc4033ee12fb938d8 change 100mA -> 100uA Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Rob Herring <robh@kernel.org> 
change 100mA -> 100uA

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Rob Herring <robh@kernel.org>
rtc: s3c: Document in binding that only s3c6410 needs a src clk 2016-03-28T22:17:31+00:00 Javier Martinez Canillas javier@osg.samsung.com 2016-02-15T14:11:06+00:00 00c9329ebe2d19a13afd86ba75218f868f2788ba The S3C binding doc says that the RTC and RTC source clocks are required but the S3C driver supports different HW IP and only the s3c6410 needs a source clock. Fix the binding explaining that the source clock is only needed for the s3c6410-rtc compatible controller. Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> 
The S3C binding doc says that the RTC and RTC source clocks are required
but the S3C driver supports different HW IP and only the s3c6410 needs a
source clock.

Fix the binding explaining that the source clock is only needed for the
s3c6410-rtc compatible controller.

Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Merge tag 'rtc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux 2016-03-25T05:49:08+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-03-25T05:49:08+00:00 8407ef4685895759f111190d091394ef974f52fb Pull more RTC updates from Alexandre Belloni: "A second pull request for v4.6 with a few fixesi before -rc1. The new features for abx80x actually make the RTC behave correctly. Drivers: - abx80x: handle both XT and RC oscillators, XT failure bit and autocalibration - m41t80: avoid out of range year values - rv8803: workaround an i2c HW issue" * tag 'rtc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: abx80x: handle the oscillator failure bit rtc: abx80x: handle autocalibration rtc: rv8803: workaround i2c HW issue rtc: mcp795: add devicetree support rtc: asm9260: remove incorrect __init/__exit annotations rtc: m41t80: avoid out of range year values rtc: s3c: Don't print an error on probe deferral rtc: rv3029: stop mentioning rv3029c2 
Pull more RTC updates from Alexandre Belloni:
 "A second pull request for v4.6 with a few fixesi before -rc1.  The new
  features for abx80x actually make the RTC behave correctly.

  Drivers:
   - abx80x: handle both XT and RC oscillators, XT failure bit and
     autocalibration
   - m41t80: avoid out of range year values
   - rv8803: workaround an i2c HW issue"

* tag 'rtc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: abx80x: handle the oscillator failure bit
  rtc: abx80x: handle autocalibration
  rtc: rv8803: workaround i2c HW issue
  rtc: mcp795: add devicetree support
  rtc: asm9260: remove incorrect __init/__exit annotations
  rtc: m41t80: avoid out of range year values
  rtc: s3c: Don't print an error on probe deferral
  rtc: rv3029: stop mentioning rv3029c2
rtc: mcp795: add devicetree support 2016-03-21T21:55:29+00:00 Emil Bartczak emilbart@gmail.com 2016-03-21T00:06:10+00:00 7f8a58925b4c0198c12344025b6ffd5dd7d9f1f5 Add device tree support to the rtc-mcp795 driver. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> 
Add device tree support to the rtc-mcp795 driver.

Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Merge tag 'rtc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux 2016-03-16T04:58:58+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-03-16T04:58:58+00:00 13f6f62f61b4d3d5f45bed889128bb7ff3fda5ed Pull RTC updates from Alexandre Belloni: "Core: - New sysfs interface to set and read clock offset - Drivers can now be both I2C and SPI (see pcf2127 and ds3232) New drivers: - Alphascale ASM9260 - Epson RX6110SA - Maxim max20024 and max77620 (in max77686) - Microchip PIC32 - NXP pcf2129 (in pcf2127) Subsystem wide cleanups: - remove IRQF_EARLY_RESUME when unecessary Drivers: - ds1307: clock output, temperature sensor and wakeup-source support - ds1685: actually spin forever in poweroff error path - ds3232: many cleanups - ds3234: merged in ds3232 - hym8563: fix invalid year calculation - max77686: many cleanups - max77802 merged in max77686 - pcf2123: cleanups and offset support - pcf85063: cleanups - pcf8523: propely handle oscillator stop bit - rv3029: many cleanups, trickle charger and temperature sensor support - rv8803: convert spin_lock to mutex_lock - rx8025: many fixes - vr41xx: restore alarm_irq_enable" * tag 'rtc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (86 commits) rtc: pcf2127: add pcf2129 device id rtc: pcf2127: add support for spi interface rtc: pcf2127: convert to use regmap rtc: rv3029: Add thermometer hwmon support rtc: rv3029: Add update_bits helper for eeprom access rtc: ds1685: actually spin forever in poweroff error path rtc: hym8563: fix invalid year calculation rtc: ds3232: use rtc->ops_lock to protect alarm operations rtc: ds3232: fix issue when irq is shared several devices rtc: ds3232: remove unused UIE code rtc: ds3232: add register access error checks rtc: ds3232: fix read on /dev/rtc after RTC_AIE_ON rtc: merge ds3232 and ds3234 rtc: ds3232: convert to use regmap rtc: pxa: fix Kconfig indentation rtc: rv3029: Add device tree property for trickle charger rtc: rv3029: Add functions for EEPROM access rtc: rv3029: Add i2c register update-bits helper rtc: rv3029: Add missing register definitions rtc: rv3029: Add "rv3029" I2C device id ... 
Pull RTC updates from Alexandre Belloni:
 "Core:
   - New sysfs interface to set and read clock offset
   - Drivers can now be both I2C and SPI (see pcf2127 and ds3232)

  New drivers:
   - Alphascale ASM9260
   - Epson RX6110SA
   - Maxim max20024 and max77620 (in max77686)
   - Microchip PIC32
   - NXP pcf2129 (in pcf2127)

  Subsystem wide cleanups:
   - remove IRQF_EARLY_RESUME when unecessary

  Drivers:
   - ds1307: clock output, temperature sensor and wakeup-source support
   - ds1685: actually spin forever in poweroff error path
   - ds3232: many cleanups
   - ds3234: merged in ds3232
   - hym8563: fix invalid year calculation
   - max77686: many cleanups
   - max77802 merged in max77686
   - pcf2123: cleanups and offset support
   - pcf85063: cleanups
   - pcf8523: propely handle oscillator stop bit
   - rv3029: many cleanups, trickle charger and temperature sensor support
   - rv8803: convert spin_lock to mutex_lock
   - rx8025: many fixes
   - vr41xx: restore alarm_irq_enable"

* tag 'rtc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (86 commits)
  rtc: pcf2127: add pcf2129 device id
  rtc: pcf2127: add support for spi interface
  rtc: pcf2127: convert to use regmap
  rtc: rv3029: Add thermometer hwmon support
  rtc: rv3029: Add update_bits helper for eeprom access
  rtc: ds1685: actually spin forever in poweroff error path
  rtc: hym8563: fix invalid year calculation
  rtc: ds3232: use rtc->ops_lock to protect alarm operations
  rtc: ds3232: fix issue when irq is shared several devices
  rtc: ds3232: remove unused UIE code
  rtc: ds3232: add register access error checks
  rtc: ds3232: fix read on /dev/rtc after RTC_AIE_ON
  rtc: merge ds3232 and ds3234
  rtc: ds3232: convert to use regmap
  rtc: pxa: fix Kconfig indentation
  rtc: rv3029: Add device tree property for trickle charger
  rtc: rv3029: Add functions for EEPROM access
  rtc: rv3029: Add i2c register update-bits helper
  rtc: rv3029: Add missing register definitions
  rtc: rv3029: Add "rv3029" I2C device id
  ...