Pull devicetree updates from Rob Herring:

 - Convert various DT (non-binding) doc files to ReST

 - Various improvements to device link code

 - Fix __of_attach_node_sysfs refcounting bug

 - Add support for 'memory-region-names' with reserved-memory binding

 - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check
   Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics,
   Shanghai Awinic Technology Co., MikroTik, Silex Insight

 - A bunch more binding conversions to DT schema. Only 3K to go.

 - Add a minimum version check for schema tools

 - Treewide dropping of 'allOf' usage with schema references. Not needed
   in new json-schema spec.

 - Some formatting clean-ups of schemas

* tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits)
  dt-bindings: clock: Add documentation for X1830 bindings.
  dt-bindings: mailbox: Convert imx mu to json-schema
  dt-bindings: power: Convert imx gpcv2 to json-schema
  dt-bindings: power: Convert imx gpc to json-schema
  dt-bindings: Merge gpio-usb-b-connector with usb-connector
  dt-bindings: timer: renesas: cmt: Convert to json-schema
  dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema
  dt-bindings: timer: Convert i.MX GPT to json-schema
  dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742
  dt-bindings: serial: Add binding for UART pin swap
  dt-bindings: geni-se: Add interconnect binding for GENI QUP
  dt-bindings: geni-se: Convert QUP geni-se bindings to YAML
  dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix
  dt-bindings: input: touchscreen: edt-ft5x06: change reg property
  dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
  dt-bindings: timer: renesas: mtu2: Convert to json-schema
  of/fdt: Remove redundant kbasename function call
  dt-bindings: clock: Convert i.MX1 clock to json-schema
  dt-bindings: clock: Convert i.MX21 clock to json-schema
  dt-bindings: clock: Convert i.MX25 clock to json-schema
  ...

Pull ARM devicetree updates from Arnd Bergmann:
 "This is the set of device tree changes, mostly covering new hardware
  support, with 577 patches touching a little over 500 files.

  There are five new Arm SoCs supported in this release, all of them for
  existing SoC families:

   - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS
     devices and Android Set-top-box designs, along with the
     "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the
     Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4
     single-board computer.

   - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and
     the iW-RainboW-G21D-Qseven-RZG1H board/SoM

   - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO
     Advance game console

  Newly added machines on already supported SoCs are:

   - AMLogic S905D based Smartlabs SML-5442TW TV box

   - AMLogic S905X3 based ODROID-C4 SBC

   - AMLogic S922XH based Beelink GT-King Pro TV box

   - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC

   - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO
     OpenPower P9 "Nicole"

   - Marvell Kirkwood based Check Point L-50 router

   - Mediatek MT8173 based Elm/Hana Chromebook laptops

   - Microchip SAMA5D2 "Industrial Connectivity Platform" reference
     board

   - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit

   - Octavo OSDMP15x based Linux Automation MC-1 development board

   - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone

   - Realtek RTD1295 based Xnano X5 TV Box

   - STMicroelectronics STM32MP1 based Stinger96 single-board computer
     and IoT Box

   - Samsung Exynos4210 based based Samsung Galaxy S2 phone

   - Socionext Uniphier based Akebi96 SBC

   - TI Keystone based K2G Evaluation board

   - TI am5729 based Beaglebone-AI development board

  Include device descriptions for additional hardware support in
  existing SoCs and machines based on all major SoC platforms:

   - AMlogic Meson

   - Allwinner sunxi

   - Arm Juno/VFP/Vexpress/Integrator

   - Broadcom bcm283x/bcm2711

   - Hisilicon hi6220

   - Marvell EBU

   - Mediatek MT27xx, MT76xx, MT81xx and MT67xx

   - Microchip SAMA5D2

   - NXP i.MX6/i.MX7/i.MX8 and Layerscape

   - Nvidia Tegra

   - Qualcomm Snapdragon

   - Renesas r8a77961, r8a7791

   - Rockchips RK32xx/RK33xx

   - ST-Ericsson ux500

   - STMicroelectronics SMT32

   - Samsung Exynos and S5PV210

   - Socionext Uniphier

   - TI OMAP5/DRA7 and Keystone"

* tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits)
  ARM: dts: keystone: Rename "msmram" node to "sram"
  arm: dts: mt2712: add uart APDMA to device tree
  arm64: dts: mt8183: add mmc node
  arm64: dts: mt2712: add ethernet device node
  arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1
  ARM: dts: mmp3: Add the fifth SD HCI
  ARM: dts: berlin*: Fix up the SDHCI node names
  ARM: dts: mmp3: Fix USB & USB PHY node names
  ARM: dts: mmp3: Fix L2 cache controller node name
  ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property
  ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property
  ARM: dts: pxa910: Fix the gpio interrupt cell number
  ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property
  ARM: dts: pxa168: Fix the gpio interrupt cell number
  ARM: dts: pxa168: Add missing address/size cells to i2c nodes
  ARM: dts: dove: Fix interrupt controller node name
  ARM: dts: kirkwood: Fix interrupt controller node name
  arm64: dts: Add SC9863A emmc and sd card nodes
  arm64: dts: Add SC9863A clock nodes
  arm64: dts: mt6358: add PMIC MT6358 related nodes
  ...

The driver now supports i.MX8MP, so update bindings accordingly.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

i.MX8MN can reuse i.MX8MQ's reset driver, update the compatible
property and related info to support i.MX8MN.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.

Scripted with ruamel.yaml with some manual fixups. Some minor whitespace
changes from the script.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clock
Signed-off-by: Rob Herring <robh@kernel.org>

Document bindings for the RZ/G1H (R8A7742) reset module.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1587678050-23468-5-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Fix various inconsistencies in schema indentation. Most of these are
list indentation which should be 2 spaces more than the start of the
enclosing keyword. This doesn't matter functionally, but affects running
scripts which do transforms on the schema files.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull devicetree updates from Rob Herring:

 - Unit test for overlays with GPIO hogs

 - Improve dma-ranges parsing to handle dma-ranges with multiple entries

 - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9

 - Improve overlay error reporting

 - Device link support for power-domains and hwlocks bindings

 - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida,
   PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and
   ITE Tech

 - Add deprecated Marvell vendor prefix 'mrvl'

 - A bunch of binding conversions to DT schema continues. Of note, the
   common serial and USB connector bindings are converted.

 - Add more Arm CPU compatibles

 - Drop Mark Rutland as DT maintainer :(

* tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits)
  MAINTAINERS: drop an old reference to stm32 pwm timers doc
  MAINTAINERS: dt: update etnaviv file reference
  dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb
  dt-bindings: uniphier-system-bus: fix warning in the example
  dt-bindings: display: meson-vpu: fix indentation of reg-names' "items"
  dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints
  dt-bindings: power: Fix example for power-domain
  dt-bindings: arm: Add some constraints for PSCI nodes
  of: some unittest overlays not untracked
  of: gpio unittest kfree() wrong object
  dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml
  dt-bindings: serial: sh-sci: Convert to json-schema
  dt-bindings: serial: Document serialN aliases
  dt-bindings: thermal: tsens: Set 'additionalProperties: false'
  dt-bindings: thermal: tsens: Fix nvmem-cell-names schema
  dt-bindings: vendor-prefixes: Add Beacon vendor prefix
  dt-bindings: vendor-prefixes: Add Topwise
  of: of_private.h: Replace zero-length array with flexible-array member
  docs: dt: fix a broken reference to input.yaml
  docs: dt: fix references to ap806-system-controller.txt
  ...

Setting 'additionalProperties: false' is frequently omitted, but is
important in order to check that there aren't extra undocumented
properties in a binding.

Ideally, we'd just add this automatically and make this the default, but
there's some cases where it doesn't work. For example, if a common
schema is referenced, then properties in the common schema aren't part
of what's considered for 'additionalProperties'. Also, sometimes there
are bus specific properties such as 'spi-max-frequency' that go into
bus child nodes, but aren't defined in the child node's schema.

So let's stick with the json-schema defined default and add
'additionalProperties: false' where needed. This will be a continual
review comment and game of wack-a-mole.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Stephen Boyd <sboyd@kernel.org> # clock
Acked-by: Lee Jones <lee.jones@linaro.org>