Add description of the PMU node for the WCN6750B module.

Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241209103455.9675-2-quic_janathot@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Pull regulator fixes from Mark Brown:
 "A couple of fixes that came in during the merge window, plus
  documetation of a new device ID for the Qualcomm LABIBB driver.

  There's a core fix for the rarely used current constraints and a fix
  for the Qualcomm RPMH driver which had described only one of the two
  voltage ranges that the hardware could control, creating a potential
  incompatibility with the configuration left by firmware"

* tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: Ignore unset max_uA constraints in current limit check
  dt-bindings: regulator: qcom-labibb-regulator: document the pmi8950 labibb regulator
  regulator: qcom-rpmh: Update ranges for FTSMPS525

Pull MFD updates from Lee Jones:

 - Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
   tps65010, have undergone minor code improvements to enhance
   consistency and fix race conditions.

 - The syscon driver now utilizes the regmap max_register_is_0
   capability for consistent register map configuration across syscons
   of all sizes.

 - New device support has been added for QCS8300, qcs615, SA8255p, and
   samsung,s2dos05, expanding the range of compatible hardware.

 - The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
   and avoids loading the charger with UCSI, streamlining functionality.

 - The bd96801 driver now utilizes the more modern maple tree register
   cache, improving performance.

 - The da9052-spi driver has undergone a fix to change the read-mask to
   write-mask, preventing potential issues.

 - Unused declarations in max77693 have been removed, and support for
   samsung,s2dos05 has been added, enhancing code clarity and device
   compatibility.

 - Error handling in cs42l43 has been fixed to avoid unbalanced
   regulator put and ensure proper synchronization during driver
   removal.

 - The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
   MODULE_ALIAS(), improving code consistency.

 - Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
   and reorganized for better clarity and maintainability.

 - The intel_soc_pmic_bxtwc driver has undergone significant
   improvements, including the use of IRQ domains for various devices,
   fixing IRQ domain names duplication, and code refactoring for better
   consistency and maintainability.

 - The ipaq-micro driver has received a fix for a missing break
   statement in the default case, enhancing code robustness.

 - Support for the AXP323 PMIC has been added to the axp20x driver,
   along with ensuring a clear relationship between IDs and model names,
   and allowing multiple regulators, broadening hardware compatibility.

 - The cs42l43 driver now disables IRQs during suspend for improved
   power management.

 - The adp5585 driver has reduced its dependencies by dropping the
   obsolete dependency on COMPILE_TEST.

 - Initial support for the MT6328 PMIC has been added to the mt6397
   driver, expanding the range of supported hardware.

 - The rtc-bd70528 driver has been simplified by dropping the IC name
   from IRQ, improving code readability.

 - Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
   updated to enhance clarity and incorporate new features.

 - The rt5033 driver has received a fix for a missing
   regmap_del_irq_chip() in the error handling path.

 - New device support has been added for MSM8917, and the
   intel_soc_pmic_crc driver now supports non-ACPI instantiated
   i2c_client.

 - The 88pm886 driver has added support for the RTC cell, and the tqmx86
   driver has improved its GPIO IRQ setup and added I2C IRQ support,
   increasing functionality.

 - The sprd,sc2731 DT schema has been updated and converted to YAML
   format for better readability and maintainability.

* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
  dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
  dt-bindings: mfd: sprd,sc2731: Convert to YAML
  mfd: tqmx86: Add I2C IRQ support
  mfd: tqmx86: Make IRQ setup errors non-fatal
  mfd: tqmx86: Refactor GPIO IRQ setup
  mfd: tqmx86: Improve gpio_irq module parameter description
  mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
  mfd: 88pm886: Add the RTC cell
  dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
  mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
  mfd: intel_soc_pmic_*: Consistently use filename as driver name
  dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
  mfd: rt5033: Fix missing regmap_del_irq_chip()
  mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
  dt-bindings: mfd: aspeed: Support for AST2700
  mfd: Switch back to struct platform_driver::remove()
  dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
  mfd: rtc: bd7xxxx Drop IC name from IRQ
  mfd: mt6397: Add initial support for MT6328
  mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
  ...

Document the pmi8950 labibb regulator with the pmi8998 compatible
as fallback since they share the same hardware settings.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241115-topic-sdm450-upstream-lab-ibb-bindings-v1-1-1f4bff4583b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

The PM8550VE has two more supplies (s1-8) than the PM8550VS (s1-6),
so move to a correct if:then: clause to accurately reflect that.

Fixes: 902f8c9830c3 ("regulator: dt-bindings: qcom,rpmh: Correct PM8550 family supplies")
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241112003544.2807368-1-quic_molvera@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Convert the Spreadtrum SC27xx PMIC bindings to DT schema. Adjust the
filename to match the compatible of the only in-tree user, SC2731.
Change #interrupt-cells value to 1, as according to [1] that is the
correct value.
Move partial examples of child nodes in the child node schemas to this new
MFD schema to have one complete example.

[1] https://lore.kernel.org/lkml/b6a32917d1e231277d240a4084bebb6ad91247e3.1550060544.git.baolin.wang@linaro.org/

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Link: https://lore.kernel.org/r/efd200c3b5b75405e4e450d064b026f10ae2f8e0.1730709384.git.stano.jakubek@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>

Document two supplies that are used by this model and the optional
xo-clk signal.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241018-sc8280xp-pwrseq-v6-1-8da8310d9564@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Convert Linear Technology LTC3676 8-output I2C voltage regulator IC
DT bindings to DT schema. Add missing interrupts: property as this
IC does have interrupt line and it is used in existing DTs.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20241016225235.114635-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>

Convert the vctrl-regulator bindings to DT schema.
This resolves a dtbs check warning for the rk3399-gru devices.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240930210424.1994047-1-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support for the swctrl-gpios property which contains the phandle to
the GPIO indicating the clock supply to the BT module.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20240813185827.154779-3-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>