The MT8188 SoC has a more in-depth power-domain tree, and the
CHECK_DTBS=y check could fail because the current MediaTek power
dt-binding is insufficient to cover its CAM_SUBA and CAM_SUBB
sub-domains.

Add one more nested power-domain layer to pass the check.

Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Fei Shao <fshao@chromium.org>
Message-ID: <20241001113052.3124869-2-fshao@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:

   - replace power_supply_register_no_ws() with power_supply_register()
     and a new "no_wakeup_source" field in struct power_supply_config

   - constify battery info tables in the core and all drivers

   - switch back to remove callback for all platform drivers

   - allow power_supply_put() to be called from atomic context

   - mark attribute arrays read-only after init

  Power-supply drivers:

   - new driver for TWL6030 and TWL6032

   - rk817: improve battery capacity calibration

   - misc small cleanups and fixes"

* tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits)
  power: reset: ep93xx: add AUXILIARY_BUS dependency
  dt-bindings: power: reset: Convert mode-.* properties to array
  power: supply: sc27xx: Fix battery detect GPIO probe
  dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio
  reset: keystone-reset: remove unused macros
  power: supply: axp20x_battery: Use scaled iio_read_channel
  power: supply: axp20x_usb_power: Use scaled iio_read_channel
  power: supply: generic-adc-battery: change my gmail
  power: supply: pmu_battery: Set power supply type to BATTERY
  power: Switch back to struct platform_driver::remove()
  power: supply: hwmon: move interface to private header
  power: supply: rk817: Update battery capacity calibration
  power: supply: rk817: stop updating info in suspend
  power: supply: rt9471: Use IC status regfield to report real charger status
  power: supply: rt9471: Fix wrong WDT function regfield declaration
  dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example
  power: supply: core: mark attribute arrays as ro_after_init
  power: supply: core: unexport power_supply_property_is_writeable()
  power: supply: core: use device mutex wrappers
  power: supply: bq27xxx: Fix registers of bq27426
  ...

Pull MFD updates from Lee Jones:

 - Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
   tps65010, have undergone minor code improvements to enhance
   consistency and fix race conditions.

 - The syscon driver now utilizes the regmap max_register_is_0
   capability for consistent register map configuration across syscons
   of all sizes.

 - New device support has been added for QCS8300, qcs615, SA8255p, and
   samsung,s2dos05, expanding the range of compatible hardware.

 - The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
   and avoids loading the charger with UCSI, streamlining functionality.

 - The bd96801 driver now utilizes the more modern maple tree register
   cache, improving performance.

 - The da9052-spi driver has undergone a fix to change the read-mask to
   write-mask, preventing potential issues.

 - Unused declarations in max77693 have been removed, and support for
   samsung,s2dos05 has been added, enhancing code clarity and device
   compatibility.

 - Error handling in cs42l43 has been fixed to avoid unbalanced
   regulator put and ensure proper synchronization during driver
   removal.

 - The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
   MODULE_ALIAS(), improving code consistency.

 - Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
   and reorganized for better clarity and maintainability.

 - The intel_soc_pmic_bxtwc driver has undergone significant
   improvements, including the use of IRQ domains for various devices,
   fixing IRQ domain names duplication, and code refactoring for better
   consistency and maintainability.

 - The ipaq-micro driver has received a fix for a missing break
   statement in the default case, enhancing code robustness.

 - Support for the AXP323 PMIC has been added to the axp20x driver,
   along with ensuring a clear relationship between IDs and model names,
   and allowing multiple regulators, broadening hardware compatibility.

 - The cs42l43 driver now disables IRQs during suspend for improved
   power management.

 - The adp5585 driver has reduced its dependencies by dropping the
   obsolete dependency on COMPILE_TEST.

 - Initial support for the MT6328 PMIC has been added to the mt6397
   driver, expanding the range of supported hardware.

 - The rtc-bd70528 driver has been simplified by dropping the IC name
   from IRQ, improving code readability.

 - Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
   updated to enhance clarity and incorporate new features.

 - The rt5033 driver has received a fix for a missing
   regmap_del_irq_chip() in the error handling path.

 - New device support has been added for MSM8917, and the
   intel_soc_pmic_crc driver now supports non-ACPI instantiated
   i2c_client.

 - The 88pm886 driver has added support for the RTC cell, and the tqmx86
   driver has improved its GPIO IRQ setup and added I2C IRQ support,
   increasing functionality.

 - The sprd,sc2731 DT schema has been updated and converted to YAML
   format for better readability and maintainability.

* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
  dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
  dt-bindings: mfd: sprd,sc2731: Convert to YAML
  mfd: tqmx86: Add I2C IRQ support
  mfd: tqmx86: Make IRQ setup errors non-fatal
  mfd: tqmx86: Refactor GPIO IRQ setup
  mfd: tqmx86: Improve gpio_irq module parameter description
  mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
  mfd: 88pm886: Add the RTC cell
  dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
  mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
  mfd: intel_soc_pmic_*: Consistently use filename as driver name
  dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
  mfd: rt5033: Fix missing regmap_del_irq_chip()
  mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
  dt-bindings: mfd: aspeed: Support for AST2700
  mfd: Switch back to struct platform_driver::remove()
  dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
  mfd: rtc: bd7xxxx Drop IC name from IRQ
  mfd: mt6397: Add initial support for MT6328
  mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
  ...

Pull SoC devicetree updates from Arnd Bergmann:
 "This release adds the devicetree files for an impressive number of new
  SoC variants, though as expected these are all related to others we
  already support:

   - The microchip sam9x7 devicetree is now added, after the device
     driver and platform code has already made it in. This is likely the
     last ARMv5 (!) platform to ever get added, updating the 20+ year
     old at91/sam9 platform with DDR3 memory and gigabit ethernet.

   - On the Apple platform, there are now devicetree files for a number
     of A-series SoCs in addition to the M-series ones, these are used
     primarily in phones and tablets, but are closely related to the
     already supported chips.

   - Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in
     older Samsung Galaxy phones.

   - Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely
     related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end
     laptops.

   - Rockchip RK3528 and RK3576 are new variants of their TV box and
     Tablet chips, still using the older ARMv8.0 cores from
     RK3328/RK3399 but with a newer process and other improvements from
     the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also
     added, these are just lower-cost versions of their normal
     counterparts.

   - TI J742S2 is a feature-reduced version of the J784s4
     industrial/automotive SoC, with fewer CPU cores.

   - Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
     (Cortex-A53) core, at this point support is only added for running
     on the RISC-V side on the LicheeRV Nano board.

  A total of 92 new .dts files describing individual machines is added,
  which must be a new record. The majority of these is for the newly
  added chips above, notably all the Apple phones and tablets. The other
  new machines include nine industrial/embedded boards with NXP i.MX6 or
  i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for
  Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm
  qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110.

  As usual there are also many newly added features in existing boards
  as well as cleanups and minor bugfixes"

* tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits)
  arm64: dts: apm: Remove unused and undocumented "bus_num" property
  arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property
  arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property
  arm64: dts: lg131x: Update spi clock properties
  arm64: dts: seattle: Update spi clock properties
  arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25
  arm64: dts: rockchip: add Radxa ROCK 5C
  dt-bindings: arm: rockchip: add Radxa ROCK 5C
  arm64: dts: rockchip: orangepi-5-plus: Enable GPU
  arm64: dts: rockchip: enable USB3 on NanoPC-T6
  arm64: dts: rockchip: adapt regulator nodenames to preferred form
  arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook
  arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B
  arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB
  arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S
  arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
  arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2
  arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5
  arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
  arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
  ...

Document the RPMh Power Domains on the SM8750 Platform.

Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Message-ID: <20241112002444.2802092-2-quic_molvera@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Convert the Spreadtrum SC27xx PMIC bindings to DT schema. Adjust the
filename to match the compatible of the only in-tree user, SC2731.
Change #interrupt-cells value to 1, as according to [1] that is the
correct value.
Move partial examples of child nodes in the child node schemas to this new
MFD schema to have one complete example.

[1] https://lore.kernel.org/lkml/b6a32917d1e231277d240a4084bebb6ad91247e3.1550060544.git.baolin.wang@linaro.org/

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Link: https://lore.kernel.org/r/efd200c3b5b75405e4e450d064b026f10ae2f8e0.1730709384.git.stano.jakubek@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>

PSCI reboot mode will map a mode name to multiple magic values instead
of just one. Convert the mode-.* property to an array. Users of the
reboot-mode schema will need to specify the maxItems of the mode-.*
properties. Existing users will all be 1.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20241107-arm-psci-system_reset2-vendor-reboots-v8-1-e8715fa65cb5@quicinc.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

While the bindings have always used the correct 'battery-detect-gpios'
property, the DTS and the Linux driver have been using the incorrect
'bat-detect-gpio' property. Document this property and mark it
as deprecated.

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://lore.kernel.org/r/f334c973dd4e6390a0cd51dbde358277a07604d7.1730720720.git.stano.jakubek@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Document the existing fsl,imx6sll-gpc compatible used with fsl,imx6q-gpc
fallback.

This fixes the following dt-schema warning:

['fsl,imx6sll-gpc', 'fsl,imx6q-gpc'] is too long

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add DT binding for MediaTek MT6735 SCPSYS power controller.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogiaocchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241017085136.68053-2-y.oudjana@protonmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>