While my email address has changed for a while, all the schemas I
contributed still have the old one unfortunately. Update it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull Devicetree updates from Rob Herring:

 - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
   syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
   Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
   panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
   Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404
   interconnect, Unisoc/Spreadtrum SoCs and UART

 - Convert a bunch of Samsung bindings to DT schema

 - Convert a bunch of ST stm32 bindings to DT schema

 - Realtek and Exynos additions to Arm Mali bindings

 - Fix schema errors in RiscV CPU schema

 - Various schema fixes from improved meta-schema checks

 - Improve the handling of 'dma-ranges' and in particular fix DMA mask
   setup on PCI bridges

 - Fix a memory leak in add_changeset_property() and DT unit tests.

 - Several documentation improvements for schema validation

 - Rework build rules to improve schema validation errors

 - Color output for dtx_diff

* tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits)
  libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
  dt-bindings: arm: Remove leftover axentia.txt
  of: unittest: fix memory leak in attach_node_and_children
  of: overlay: add_changeset_property() memory leak
  dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes
  dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems
  dt-bindings: power: Rename back power_domain.txt bindings to fix references
  dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml
  dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema
  dt-bindings: remoteproc: convert stm32-rproc to json-schema
  dt-bindings: mailbox: convert stm32-ipcc to json-schema
  dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
  dt-bindings: interrupt-controller: Convert stm32-exti to json-schema
  dt-bindings: crypto: Convert stm32 HASH bindings to json-schema
  dt-bindings: rng: Convert stm32 RNG bindings to json-schema
  dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
  dt-bindings: pwm: Convert PWM bindings to json-schema
  dt-bindings: serial: Add a new compatible string for SC9863A
  dt-bindings: serial: Convert sprd-uart to json-schema
  dt-bindings: arm: Add bindings for Unisoc SC9863A
  ...

Add dt bindings document for pinmux & GPIO controller driver of
Intel Lightning Mountain SoC.

Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Link: https://lore.kernel.org/r/b59afc497e41404fea06aa48d633cba183ee944d.1573797249.git.rahul.tanwar@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Linux 5.4-rc5

As pinctrl bindings have a flexible structure and no standard child node
naming convention, creating a single pinctrl schema doesn't work. Instead,
create schemas for the pin mux and config nodes which device pinctrl schema
can reference.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191107224254.15712-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Document the bindings for PM8950 and PMI8950 PMIC MPPs.

Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20191031103507.30678-5-kholk11@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Document the bindings for PM8950 and PMI8950 PMIC GPIOs.

Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20191031103507.30678-3-kholk11@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The Allwinner SoCs have a pin controller supported in Linux, with a
matching Device Tree binding.

Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20191022160806.42971-1-mripard@kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add new compatible name for Amlogic's Meson-A1 pin controller
add a dt-binding header file which document the detail pin names.
Note that A1 doesn't need DS bank reg any more, use gpio reg as
base.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Link: https://lore.kernel.org/r/1572004167-24150-2-git-send-email-qianggui.song@amlogic.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: sh-pfc: Updates for v5.5 (take two)

  - Add support for the new R-Car M3-W+ (r8a77961) SoC,
  - Small fixes and cleanups.