Rename:
	pinctrl-binding.txt -> pinctrl-bindings.txt

In order to match the current name of this file.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for v4.18.

  No core changes this time! Just a calm all-over-the-place drivers,
  updates and fixes cycle as it seems.

  New drivers/subdrivers:

   - Actions Semiconductor S900 driver with more Actions variants for
     S700, S500 in the pipe. Also generic GPIO support on top of the
     same driver and IRQ support is in the pipe.

   - Renesas r8a77470 PFC support.

   - Renesas r8a77990 PFC support.

   - Allwinner Sunxi H6 R_PIO support.

   - Rockchip PX30 support.

   - Meson Meson8m2 support.

   - Remove support for the ill-fated Samsung Exynos 5440 SoC.

  Improvements:

   - Context save/restore support in pinctrl-single.

   - External interrupt support for the Mediatek MT7622.

   - Qualcomm ACPI HID QCOM8002 supported.

  Fixes:

   - Fix up suspend/resume support for Exynos 5433.

   - Fix Strago DMI fixes on the Intel Cherryview"

* tag 'pinctrl-v4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
  pinctrl: cherryview: limit Strago DMI workarounds to version 1.0
  pinctrl: at91-pio4: add missing of_node_put
  pinctrl: armada-37xx: Fix spurious irq management
  gpiolib: discourage gpiochip_add_pin[group]_range for DT pinctrls
  pinctrl: msm: fix gpio-hog related boot issues
  MAINTAINERS: update entry for Mediatek pin controller
  pinctrl: mediatek: remove unused fields in struct mtk_eint_hw
  pinctrl: mediatek: use generic EINT register maps for each SoC
  pinctrl: mediatek: add EINT support to MT7622 SoC
  pinctrl: mediatek: refactor EINT related code for all MediaTek pinctrl can fit
  dt-bindings: pinctrl: add external interrupt support to MT7622 pinctrl
  pinctrl: freescale: Switch to SPDX identifier
  pinctrl: samsung: Fix suspend/resume for Exynos5433 GPF1..5 banks
  pinctrl: sh-pfc: rcar-gen3: Fix grammar in static pin comments
  pinctrl: sh-pfc: r8a77965: Add I2C pin support
  pinctrl: sh-pfc: r8a77990: Add EthernetAVB pins, groups and functions
  pinctrl: sh-pfc: r8a77990: Add I2C{1,2,4,5,6,7} pins, groups and functions
  pinctrl: sh-pfc: r8a77990: Add SCIF pins, groups and functions
  pinctrl: sh-pfc: r8a77990: Add bias pinconf support
  pinctrl: sh-pfc: Initial R8A77990 PFC support
  ...

Extend the capability of MT7622 pinctrl with adding EINT so that each
GPIO can be used to notify CPU when a signal state is changing on the
line as an external interrupt.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: sh-pfc: Updates for v4.18 (take two)

  - Add support for the new R-Car E3 SoC,
  - Add I2C pin groups on R-Car M3-N,
  - Small fixes and cleanups.

This patch adds initial pinctrl driver to support for the R8A77990 SoC.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

There are 4 banks (GPIO0 ~ GPIO3), bank0 is in PD_PMU
subsystem, bank1/bank2/bank3 are in PD_BUS subsystem.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add gpio bindings for Actions Semi S900 SoC.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Allwinner H6 SoC has a R_PIO pin controller like other Allwinner SoCs,
which controls the PL and PM pin banks.

Add support for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Document PFC support for the R8A77470 SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The Meson8m2 SoC is a variant of Meson8 with some updates from Meson8b
(such as the Gigabit capable DesignWare MAC).
It is mostly pin compatible with Meson8, only 10 (existing) CBUS pins
get an additional function (four of these are Ethernet RXD2, RXD3, TXD2
and TXD3 which are required when the board uses an RGMII PHY).
The AOBUS pins seem to be identical on Meson8 and Meson8m2.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>