linux.git/Documentation/devicetree/bindings/pinctrl, branch v3.17

pinctrl: qcom: apq8064: Correct interrupts in example

2014-08-21T12:28:24+00:00

The example in the binding document indicates that interrupt 32 is used
for the TLMM summary IRQ. Correct this to reduce the confusion.

Signed-off-by: Bjorn Andersson 
Signed-off-by: Linus Walleij

Merge tag 'dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-08-08T18:16:58+00:00

Pull ARM SoC device-tree changes from Olof Johansson:
 "Unlike the board branch, this keeps having large sets of changes for
  every release, but that's quite expected and is so far working well.

  Most of this is plumbing for various device bindings and new
  platforms, but there's also a bit of cleanup and code removal for
  things that are moved from platform code to DT contents (some OMAP
  clock code in particular).

  There's also a pinctrl driver for tegra here (appropriately acked),
  that's introduced this way to make it more bisectable.

  I'm happy to say that there were no conflicts at all with this branch
  this release, which means that changes are flowing through our tree as
  expected instead of merged through driver maintainers (or at least not
  done with conflicts).

  There are several new boards added, and a couple of SoCs.  In no
  particular order:

   - Rockchip RK3288 SoC support, including DTS for a dev board that
     they have seeded with some community developers.
   - Better support for Hardkernel Exynos4-based ODROID boards.
   - CCF conversions (and dtsi contents) for several Renesas platforms.
   - Gumstix Pepper (TI AM335x) board support
   - TI eval board support for AM437x
   - Allwinner A23 SoC, very similar to existing ones which mostly has
     resulted in DT changes for support.  Also includes support for an
     Ippo tablet with the chipset.
   - Allwinner A31 Hummingbird board support, not to be confused with
     the SolidRun i.MX-based Hummingboard.
   - Tegra30 Apalis board support"

* tag 'dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (334 commits)
  ARM: dts: Enable USB host0 (EHCI) on rk3288-evb
  ARM: dts: add rk3288 ehci usb devices
  ARM: dts: Turn on USB host vbus on rk3288-evb
  ARM: tegra: apalis t30: fix device tree compatible node
  ARM: tegra: paz00: Fix some indentation inconsistencies
  ARM: zynq: DT: Clarify Xilinx Zynq platform
  ARM: dts: rockchip: add watchdog node
  ARM: dts: rockchip: remove pinctrl setting from radxarock uart2
  ARM: dts: Add missing pinctrl for uart0/1 for exynos3250
  ARM: dts: Remove duplicate 'interrput-parent' property for exynos3250
  ARM: dts: Add TMU dt node to monitor the temperature for exynos3250
  ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250
  ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only
  ARM: dts: max77686 is exynos5250-snow only
  ARM: zynq: DT: Remove DMA from board DTs
  ARM: zynq: DT: Add CAN node
  ARM: EXYNOS: Add exynos5260 PMU compatible string to DT match table
  ARM: dts: Add PMU DT node for exynos5260 SoC
  ARM: EXYNOS: Add support for Exynos5410 PMU
  ARM: dts: Add PMU to exynos5410
  ...

pinctrl: qcom: Make muxing of gpio function explicit

2014-07-22T14:31:58+00:00

Instead of relying on pinmux->disable(), make the gpio function an
explicit function for all pins that supports it.

Signed-off-by: Bjorn Andersson 
Signed-off-by: Linus Walleij

of: Add NVIDIA Tegra XUSB pad controller binding

2014-07-11T12:40:41+00:00

This patch adds the device tree binding documentation for the XUSB pad
controller found on NVIDIA Tegra SoCs. It exposes both pinmuxing and PHY
capabilities.

Tested-by: Mikko Perttunen 
Acked-by: Linus Walleij 
Signed-off-by: Thierry Reding

sh-pfc: Add renesas,pfc-r8a7791 to binding documentation

2014-07-11T12:08:39+00:00

The driver already supports the r8a7791 SoC, and "renesas,pfc-r8a7791"
is already in use.

Signed-off-by: Geert Uytterhoeven 
Acked-by: Laurent Pinchart 
Signed-off-by: Linus Walleij

pinctrl: msm: Add msm8960 definitions

2014-07-11T12:08:38+00:00

Signed-off-by: Bjorn Andersson 
Signed-off-by: Linus Walleij

pinctrl: samsung: Allow pin value to be initialized using pinfunc

2014-07-11T12:08:38+00:00

This patch extends the range of settings configurable via pinfunc API
to cover pin value as well. This allows configuration of default values
of pins, which is useful for pins that are not supposed to be used by
any dedicated driver, but need certain board-specific setting.

Signed-off-by: Tomasz Figa 
Acked-by: Kyungmin Park 
Signed-off-by: Linus Walleij

pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes

2014-07-11T12:08:37+00:00

One of remaining limitations of current pinctrl-samsung driver was
the inability to parse multiple pinmux/pinconf group nodes grouped
inside a single device tree node. It made defining groups of pins for
single purpose, but with different parameters very inconvenient.

This patch implements Tegra-like support for grouping multiple pinctrl
groups inside one device tree node, by completely changing the way
pin groups and functions are parsed from device tree. The code creating
pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while
the initial creation of groups and functions has been completely
rewritten with following assumptions:
 - each group consists of just one pin and does not depend on data
   from device tree,
 - each function is represented by a device tree child node of the
   pin controller, which in turn can contain multiple child nodes
   for pins that need to have different configuration values.

Device Tree bindings are fully backwards compatible. New functionality
can be used by defining a new pinctrl group consisting of several child
nodes, as on following example:

	sd4_bus8: sd4-bus-width8 {
		part-1 {
			samsung,pins = "gpk0-3", "gpk0-4",
					"gpk0-5", "gpk0-6";
			samsung,pin-function = <3>;
			samsung,pin-pud = <3>;
			samsung,pin-drv = <3>;
		};
		part-2 {
			samsung,pins = "gpk1-3", "gpk1-4",
					"gpk1-5", "gpk1-6";
			samsung,pin-function = <4>;
			samsung,pin-pud = <4>;
			samsung,pin-drv = <3>;
		};
	};

Tested on Exynos4210-Trats board and a custom Exynos4212-based one.

Signed-off-by: Tomasz Figa 
Acked-by: Kyungmin Park 
Reviewed-by: Stephen Warren 
Cc: devicetree@vger.kernel.org
Cc: Rob Herring 
Cc: Mark Rutland 
Signed-off-by: Linus Walleij

pinctrl: sunxi: Add A23 R_PIO controller support

2014-07-11T12:08:30+00:00

The A23 has a R_PIO pin controller, similar to the one found on the A31 SoC.
Add support for the pins controlled by the R_PIO controller.

Signed-off-by: Chen-Yu Tsai 
Acked-by: Maxime Ripard 
Signed-off-by: Linus Walleij

pinctrl: sunxi: Add A23 PIO controller support

2014-07-11T12:08:30+00:00

The A23 uses the same pin controller as previous SoC's from Allwinner.
Add support for the pins controlled by the main PIO controller.

Signed-off-by: Chen-Yu Tsai 
Acked-by: Maxime Ripard 
Signed-off-by: Linus Walleij