Fix the 'reg is too long' warning caused by me adding 64-bit address and
size to the example, while default being 32-bit (cell size equal to 1).
Reported-by: Rob Herring <robh+dt@kernel.org>
Fixes: 505fb2541678 ("dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230823181728.3082946-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull phy updates from Vinod Koul: "As usual a couple of new drivers, a bunch of new device support and few updates to existing drivers New Support: - Starfive dphy rx, JH7110 usb and pcie support - Rockchip rv1126 inno-dsi phy, rk3588 usb and pcie support - Qualcomm sa8775p PCIe support, M31 USB PHY driver - Samsung Exynos850 usb support Updates: - Mediatek dsi driver clock updates - Qualcomm sm8150 combo phy with reworking of qmp pcie driver - Xilinx zynqmp runtime PM support" * tag 'phy-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (83 commits) phy: exynos5-usbdrd: Add Exynos850 support phy: exynos5-usbdrd: Add 26MHz ref clk support phy: exynos5-usbdrd: Make it possible to pass custom phy ops dt-bindings: phy: samsung,usb3-drd-phy: Add Exynos850 support phy: qcom-qmp-combo: fix clock probing phy: qcom-qmp-pcie: support SM8150 PCIe QMP PHYs phy: qcom-qmp-pcie: populate offsets configuration phy: qcom-qmp-pcie: simplify clock handling phy: qcom-qmp-pcie: keep offset tables sorted phy: qcom-qmp-pcie: drop ln_shrd from v5_20 config dt-bindings: phy: qcom,qmp-pcie: describe SM8150 PCIe PHYs dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed phy: qcom: Introduce M31 USB PHY driver dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy phy: rockchip: inno-dsidphy: Add rv1126 support dt-bindings: phy: rockchip-inno-dsidphy: Document rv1126 dt-bindings: phy: mediatek,tphy: allow simple nodename pattern phy: amlogic: meson-g12a-usb2: fix Wvoid-pointer-to-enum-cast warning phy: marvell pxa-usb: fix Wvoid-pointer-to-enum-cast warning ...
Pull USB / Thunderbolt / PHY driver updates from Greg KH:
"Here is the big set of USB, Thunderbolt, and PHY driver updates for
6.6-rc1. Included in here are:
- PHY driver additions and cleanups
- Thunderbolt minor additions and fixes
- USB MIDI 2 gadget support added
- dwc3 driver updates and additions
- Removal of some old USB wireless code that was missed when that
codebase was originally removed a few years ago, cleaning up some
core USB code paths
- USB core potential use-after-free fixes that syzbot from different
people/groups keeps tripping over
- typec updates and additions
- gadget fixes and cleanups
- loads of smaller USB core and driver cleanups all over the place
Full details are in the shortlog. All of these have been in linux-next
for a while with no reported problems"
* tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
platform/chrome: cros_ec_typec: Configure Retimer cable type
tcpm: Avoid soft reset when partner does not support get_status
usb: typec: tcpm: reset counter when enter into unattached state after try role
usb: typec: tcpm: set initial svdm version based on pd revision
USB: serial: option: add FOXCONN T99W368/T99W373 product
USB: serial: option: add Quectel EM05G variant (0x030e)
usb: dwc2: add pci_device_id driver_data parse support
usb: gadget: remove max support speed info in bind operation
usb: gadget: composite: cleanup function config_ep_by_speed_and_alt()
usb: gadget: config: remove max speed check in usb_assign_descriptors()
usb: gadget: unconditionally allocate hs/ss descriptor in bind operation
usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()
usb: gadget: add a inline function gether_bitrate()
usb: gadget: use working speed to calcaulate network bitrate and qlen
dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support
usb: dwc3: exynos: Add support for Exynos850 variant
usb: gadget: udc-xilinx: fix incorrect type in assignment warning
usb: gadget: udc-xilinx: fix cast from restricted __le16 warning
usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning
USB: dwc2: hande irq on dead controller correctly
...
Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Correct also the format // -> .* in few Allwinner binding headers as pointed out by checkpatch: WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
Document Exynos850 compatible. USB 2.0 DRD PHY on Exynos850 has two clocks (ref and phy), which is already described in bindings. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230819031731.22618-3-semen.protsenko@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
Descrbie two PCIe PHYs found on the Qualcomm SM8150 platform, single lane and two lanes Gen3 PHYs. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230820142035.89903-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
Migrate legacy bindings (described in qcom,ipq8074-qmp-pcie-phy.yaml) to qcom,sc8280xp-qmp-pcie-phy.yaml. This removes a need to declare the child PHY node or split resource regions. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230820142035.89903-2-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the M31 USB2 phy present in IPQ5332. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Co-developed-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/44a31cf0361df8db527684c7fb3b38e6ece950c1.1691999761.git.quic_varada@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document a compatible string for the rv1126 dsi-dphy. Signed-off-by: Jagan Teki <jagan@edgeble.ai> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230731110012.2913742-4-jagan@edgeble.ai Signed-off-by: Vinod Koul <vkoul@kernel.org>
The pattern for the nodename only allows t-phy@... , however, for the case
when the t-phy has no `reg` and only `ranges` (basically when the t-phy
is just a parent node), dtc will throw this warning:
Warning (unit_address_vs_reg): /t-phy@1a243000: node has a unit name, but no reg or ranges property
For a node like this:
sata_phy: t-phy@1a243000 {
ranges;
sata_port: sata-phy@1a243000 {
reg = <0 0x1a243000 0 0x0100>;
};
};
it is normal that the parent node 't-phy' would be without any address, as in:
sata_phy: t-phy {
ranges;
sata_port: sata-phy@1a243000 {
reg = <0 0x1a243000 0 0x0100>;
};
};
because being just a holder it does not have its own reg.
However the binding does not allow such a name for the t-phy, so with this
patch, making the `@[0-9a-f]+` part optional, such node is possible.
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230814093931.9298-1-eugen.hristev@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>