The examples template is a 'simple-bus' with a size of 1 cell for
had between 2 and 4 cells which really only errors on I2C or SPI type
devices with a single cell.

The easiest fix in most cases is to change the 'reg' property to 1 cell
for address and size.

Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: linux-rockchip@lists.infradead.org
Cc: linux-media@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: netdev@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

The QCom QMP PHY bindings have child nodes with translatable (MMIO)
addresses, so a 'ranges' property is required in the parent node.
Additionally, the examples default to 1 address and size cell, so let's
fix that, too.

Fixes: ccf51c1cedfd ("dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml")
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

Another round of 'allOf' removals that came in this cycle.

json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.

Signed-off-by: Rob Herring <robh@kernel.org>

Pull USB/PHY driver updates from Greg KH:
 "Here are the large set of USB and PHY driver updates for 5.8-rc1.

  Nothing huge, just lots of little things:

   - USB gadget fixes and additions all over the place

   - new PHY drivers

   - PHY driver fixes and updates

   - XHCI driver updates

   - musb driver updates

   - more USB-serial driver ids added

   - various USB quirks added

   - thunderbolt minor updates and fixes

   - typec updates and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits)
  usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
  usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
  Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings"
  Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180"
  Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver"
  USB: serial: ch341: fix lockup of devices with limited prescaler
  USB: serial: ch341: add basis for quirk detection
  CDC-ACM: heed quirk also in error handling
  USB: serial: option: add Telit LE910C1-EUX compositions
  usb: musb: Fix runtime PM imbalance on error
  usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
  usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
  usb: musb: use true for 'use_dma'
  usb: musb: start session in resume for host port
  usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  USB: serial: qcserial: add DW5816e QDL support
  thunderbolt: Add trivial .shutdown
  usb: dwc3: keystone: Turn on USB3 PHY before controller
  dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
  dt-bindings: usb: convert keystone-usb.txt to YAML
  ...

Pull devicetree updates from Rob Herring:

 - Convert various DT (non-binding) doc files to ReST

 - Various improvements to device link code

 - Fix __of_attach_node_sysfs refcounting bug

 - Add support for 'memory-region-names' with reserved-memory binding

 - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check
   Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics,
   Shanghai Awinic Technology Co., MikroTik, Silex Insight

 - A bunch more binding conversions to DT schema. Only 3K to go.

 - Add a minimum version check for schema tools

 - Treewide dropping of 'allOf' usage with schema references. Not needed
   in new json-schema spec.

 - Some formatting clean-ups of schemas

* tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits)
  dt-bindings: clock: Add documentation for X1830 bindings.
  dt-bindings: mailbox: Convert imx mu to json-schema
  dt-bindings: power: Convert imx gpcv2 to json-schema
  dt-bindings: power: Convert imx gpc to json-schema
  dt-bindings: Merge gpio-usb-b-connector with usb-connector
  dt-bindings: timer: renesas: cmt: Convert to json-schema
  dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema
  dt-bindings: timer: Convert i.MX GPT to json-schema
  dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742
  dt-bindings: serial: Add binding for UART pin swap
  dt-bindings: geni-se: Add interconnect binding for GENI QUP
  dt-bindings: geni-se: Convert QUP geni-se bindings to YAML
  dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix
  dt-bindings: input: touchscreen: edt-ft5x06: change reg property
  dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
  dt-bindings: timer: renesas: mtu2: Convert to json-schema
  of/fdt: Remove redundant kbasename function call
  dt-bindings: clock: Convert i.MX1 clock to json-schema
  dt-bindings: clock: Convert i.MX21 clock to json-schema
  dt-bindings: clock: Convert i.MX25 clock to json-schema
  ...

Pull media updates from Mauro Carvalho Chehab:

 - Media documentation is now split into admin-guide, driver-api and
   userspace-api books (a longstanding request from Jon);

 - The media Kconfig was reorganized, in order to make easier to select
   drivers and their dependencies;

 - The testing drivers now has a separate directory;

 - added a new driver for Rockchip Video Decoder IP;

 - The atomisp staging driver was resurrected. It is meant to work with
   4 generations of cameras on Atom-based laptops, tablets and cell
   phones. So, it seems worth investing time to cleanup this driver and
   making it in good shape.

 - Added some V4L2 core ancillary routines to help with h264 codecs;

 - Added an ov2740 image sensor driver;

 - The si2157 gained support for Analog TV, which, in turn, added
   support for some cx231xx and cx23885 boards to also support analog
   standards;

 - Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and
   V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera
   is located at the device;

 - VIDIOC_ENUM_FMT was extended to support MC-centric devices;

 - Lots of drivers improvements and cleanups.

* tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits)
  media: Documentation: media: Refer to mbus format documentation from CSI-2 docs
  media: s5k5baf: Replace zero-length array with flexible-array
  media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h>
  media: i2c: Add ov2740 image sensor driver
  media: ov8856: Implement sensor module revision identification
  media: ov8856: Add devicetree support
  media: dt-bindings: ov8856: Document YAML bindings
  media: dvb-usb: Add Cinergy S2 PCIe Dual Port support
  media: dvbdev: Fix tuner->demod media controller link
  media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging
  media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property
  media: atomisp: unify the version for isp2401 a0 and b0 versions
  media: atomisp: update TODO with the current data
  media: atomisp: adjust some code at sh_css that could be broken
  media: atomisp: don't produce errs for ignored IRQs
  media: atomisp: print IRQ when debugging
  media: atomisp: isp_mmu: don't use kmem_cache
  media: atomisp: add a notice about possible leak resources
  media: atomisp: disable the dynamic and reserved pools
  media: atomisp: turn on camera before setting it
  ...

Add USB PHY support for r8a7742 SoC. Renesas RZ/G1H (R8A7742)
USB PHY is identical to the R-Car Gen2 family.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

Felipe writes:

USB: changes for v5.8 merge window

Rather busy cycle. We have a total 99 non-merge commits going into v5.8
merge window. The majority of the changes are in dwc3 this around (31.7%
of all changes). It's composed mostly Thinh's recent updates to get dwc3
to behave correctly with stream transfers. We have also have Roger's for
Keystone platforms and Neil's updates for the meson glue layer.

Apart from those, we have the usual set of non-critical fixes, new
device IDs, spelling fixes all over the place.

Signed-off-by: Felipe Balbi <balbi@kernel.org>

* tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (99 commits)
  usb: dwc3: keystone: Turn on USB3 PHY before controller
  dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
  dt-bindings: usb: convert keystone-usb.txt to YAML
  usb: dwc3: gadget: Check for prepared TRBs
  usb: gadget: Fix issue with config_ep_by_speed function
  usb: cdns3: ep0: delete the redundant status stage
  usb: dwc2: Update Core Reset programming flow.
  usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe()
  usb: gadget: fix potential double-free in m66592_probe.
  usb: cdns3: Fix runtime PM imbalance on error
  usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check
  usb: dwc3: Increase timeout for CmdAct cleared by device controller
  USB: dummy-hcd: use configurable endpoint naming scheme
  usb: cdns3: gadget: assign interrupt number to USB gadget structure
  usb: gadget: core: sync interrupt before unbind the udc
  arm64: dts: qcom: sc7180: Add interconnect properties for USB
  arm64: dts: qcom: sdm845: Add interconnect properties for USB
  dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
  ARM: dts: at91: Remove the USB EP child node
  dt-bindings: usb: atmel: Mark EP child node as deprecated
  ...

The registers which are managed by the meson-gxl-usb3 PHY driver are
actually "USB control" registers (which are "glue" registers which
manage OTG detection and routing of the OTG capable port between the
DWC2 peripheral-only controller and the DWC3 host-only controller).

Drop the meson-gxl-usb3 PHY driver now that the dwc3-meson-g12a-usb
driver supports the USB control registers on GXL and GXM SoCs (these
were previously managed by the meson-gxl-usb3 PHY driver).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

Kishon writes:

phy: for 5.8

*) Add new PHY driver to support Cadence SALVO PHY which supports USB3 & USB2
*) Add new PHY driver to support Intel ComboPhy which supports PCIe, SATA and
   EMAC
*) Add new PHY driver for Qualcomm IPQ40xx USB PHY
*) Add new PHY driver for Synopsys FemtoPHY V2 driver used in Qualcomm SOCs
*) Add support for Qualcomm SM8250 UFS PHY and SM8150 QMP USB3 PHY in
   qcom-qmp-phy driver
*) Add support for Amlogic USB2 PHY on Meson8m2 in phy-meson8b-usb2 driver
*) Add DisplayPort mode support in Wiz (TI Cadence PHY wrapper), to enable eDP
   in TI's J721E SoC
*) Add support for super speed USB PHY in TI's AM654 SoC
*) Add fix in Broadcom Stingray USB PHY to get USB PHY PLL lock reliably
*) Add fix in Samsung phy-s5pv210-usb2 to get USB working on s5pv210
*) Add fix in Amlogic phy-meson8b-usb2 to get host only mode working on Meson8
*) Add fix in Cadence phy-cadence-sierra to get USB3 device disconnect issue
*) Convert meson8b-usb2-phy, qcom-qmp-phy, rcar-gen3-phy-usb2 and
   rcar-gen3-phy-usb3 device tree binding to YAML schema
*) Minor fixes and cleanups in phy-cpcap-usb, j721e-wiz, omap-usb2,
   phy-bcm-sr-usb, phy-brcm-usb PHY driver

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits)
  phy: intel: Add driver support for ComboPhy
  dt-bindings: phy: Add YAML schemas for Intel ComboPhy
  dt-bindings: phy: Add PHY_TYPE_XPCS definition
  phy: qcom-qmp: Add QMP V3 USB3 PHY support for SC7180
  dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SC7180
  dt-bindings: phy: qcom,qmp-usb3-dp: Add dt bindings for USB3 DP PHY
  dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml
  phy: cadence: sierra: Fix for USB3 U1/U2 state
  phy: ti: am654: add support for USB super-speed
  phy: ti: am654: show up in regmap debugfs
  drivers: phy: sr-usb: do not use internal fsm for USB2 phy init
  dt-bindings: phy: renesas: usb3-phy: add r8a77961 support
  dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
  dt-bindings: phy: renesas: usb2-phy: add r8a77961 support
  dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
  phy: qcom-qmp: Ensure register indirection arrays initialized
  phy: omap-usb2: Clean up exported header
  phy: phy-bcm-ns2-usbdrd: Constify phy_ops
  phy: phy-brcm-usb: Constify static structs
  phy: sr-usb: Constify phy_ops
  ...