linux.git/Documentation/devicetree/bindings/net, branch v6.5 Linux kernel source tree dt-bindings: net: mediatek,net: fixup MAC binding 2023-07-31T08:16:04+00:00 Rafał Miłecki rafal@milecki.pl 2023-07-29T11:10:45+00:00 8469c7f5472fe5f77fc31c8f10f23d5aad987231 1. Use unevaluatedProperties It's needed to allow ethernet-controller.yaml properties work correctly. 2. Drop unneeded phy-handle/phy-mode 3. Don't require phy-handle Some SoCs may use fixed link. For in-kernel MT7621 DTS files this fixes following errors: arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@0: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@0: 'phy-handle' is a required property From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@1: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@1: 'phy-handle' is a required property From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
1. Use unevaluatedProperties
It's needed to allow ethernet-controller.yaml properties work correctly.

2. Drop unneeded phy-handle/phy-mode

3. Don't require phy-handle
Some SoCs may use fixed link.

For in-kernel MT7621 DTS files this fixes following errors:
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@0: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@0: 'phy-handle' is a required property
        From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@1: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@1: 'phy-handle' is a required property
        From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
dt-bindings: net: rockchip-dwmac: fix {tx|rx}-delay defaults/range in schema 2023-07-28T09:56:40+00:00 Eugen Hristev eugen.hristev@collabora.com 2023-07-26T07:06:15+00:00 5416d7925e6ee72bf1d35cad1957c9a194554da4 The range and the defaults are specified in the description instead of being specified in the schema. Fix it by adding the default value in the `default` field and specifying the range as `minimum` and `maximum`. Fixes: b331b8ef86f0 ("dt-bindings: net: convert rockchip-dwmac to json-schema") Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The range and the defaults are specified in the description instead of
being specified in the schema.
Fix it by adding the default value in the `default` field and specifying
the range as `minimum` and `maximum`.

Fixes: b331b8ef86f0 ("dt-bindings: net: convert rockchip-dwmac to json-schema")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'devicetree-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2023-07-05T19:50:27+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-07-05T19:50:27+00:00 b9861581641225262b836508ec2980e1c4fd0c91 Pull more devicetree updates from Rob Herring: - Whitespace clean-ups in binding examples - Restrict node name suffixes to "-[0-9]+" for cases of multiple instances which don't have unit-addresses - Convert brcm,kona-wdt and cdns,wdt-r1p2 watchdog bindings to DT schema * tag 'devicetree-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: soc: qcom: stats: Update maintainer email dt-bindings: cleanup DTS example whitespaces dt-bindings: timestamp: restrict node name suffixes dt-bindings: slimbus: restrict node name suffixes dt-bindings: watchdog: restrict node name suffixes dt-bindings: watchdog: brcm,kona-wdt: convert txt file to yaml dt-bindings: watchdog: cdns,wdt-r1p2: Convert cadence watchdog to yaml 
Pull more devicetree updates from Rob Herring:

 - Whitespace clean-ups in binding examples

 - Restrict node name suffixes to "-[0-9]+" for cases of multiple
   instances which don't have unit-addresses

 - Convert brcm,kona-wdt and cdns,wdt-r1p2 watchdog bindings to DT
   schema

* tag 'devicetree-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: soc: qcom: stats: Update maintainer email
  dt-bindings: cleanup DTS example whitespaces
  dt-bindings: timestamp: restrict node name suffixes
  dt-bindings: slimbus: restrict node name suffixes
  dt-bindings: watchdog: restrict node name suffixes
  dt-bindings: watchdog: brcm,kona-wdt: convert txt file to yaml
  dt-bindings: watchdog: cdns,wdt-r1p2: Convert cadence watchdog to yaml
dt-bindings: cleanup DTS example whitespaces 2023-07-05T15:53:52+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2023-07-02T18:23:08+00:00 ad5d960168303a172b69bdf3708fecffb0810948 The DTS code coding style expects spaces around '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #display/msm Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20230702182308.7583-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> 
The DTS code coding style expects spaces around '=' sign.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #display/msm
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230702182308.7583-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2023-06-29T22:07:06+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-06-29T22:07:06+00:00 6c1561fb900524c5bceb924071b3e9b8a67ff3da Pull ARM SoC devicetree updates from Arnd Bergmann: "The biggest change this time is for the 32-bit devicetree files, which are all moved to a new location, using separate subdirectories for each SoC vendor, following the same scheme that is used on arm64, mips and riscv. This has been discussed for many years, but so far we never did this as there was a plan to move the files out of the kernel entirely, which has never happened. The impact of this will be that all external patches no longer apply, and anything depending on the location of the dtb files in the build directory will have to change. The installed files after 'make dtbs_install' keep the current location. There are six added SoCs here that are largely variants of previously added chips. Two other chips are added in a separate branch along with their device drivers. - The Samsung Exynos 4212 makes its return after the Samsung Galaxy Express phone is addded at last. The SoC support was originally added in 2012 but removed again in 2017 as it was unused at the time. - Amlogic C3 is a Cortex-A35 based smart IP camera chip - Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of the still common MSM8916 (Snapdragon 410) phone chip that has been supported for a long time. - Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end laptop chips, used in the Lenovo Flex 5G, which is added along with the reference board. - Qualcomm SDX75 is the latest generation modem chip that is used as a peripherial in phones but can also run a standalone Linux. Unlike the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55. - Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie C910 core, a step up from all previously added rv64 chips. All of the above come with reference board implementations, those included there are 39 new board files, but only five more 32-bit this time, probably a new low: - Marantec Maveo board based on dhcor imx6ull module - Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip - Epson Moverio BT-200 AR glasses based on TI OMAP4 - PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM - ICnova ADB4006 board based on Allwinner A20 On the 64-bit side, there are also fewer addded machines than we had in the recent releases: - Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device. - NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234 - Qualcomm gains support for 6 reference boards on various members of their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top of the various reference platforms for their new chips. - Rockchips support for several newer boards: Indiedroid Nova (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S (rk3568) - TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin family with AM62 COM, carrier and dev boards Other changes to existing boards contain the usual minor improvements along with - continued updates to clean up dts files based on dtc warnings and binding checks, in particular cache properties and node names - support for devicetree overlays on at91, bcm283x - significant additions to existing SoC support on mediatek, qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1 As usual, a lot more detail is available in the individual merge commits" * tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits) ARM: mvebu: fix unit address on armada-390-db flash ARM: dts: Move .dts files to vendor sub-directories kbuild: Support flat DTBs install ARM: dts: Add .dts files missing from the build ARM: dts: allwinner: Use quoted #include ARM: dts: lan966x: kontron-d10: add PHY interrupts ARM: dts: lan966x: kontron-d10: fix SPI CS ARM: dts: lan966x: kontron-d10: fix board reset ARM: dts: at91: Enable device-tree overlay support for AT91 boards arm: dts: Enable device-tree overlay support for AT91 boards arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller ARM: dts: at91: use generic name for shutdown controller ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML riscv: dts: sort makefile entries by directory riscv: defconfig: enable T-HEAD SoC MAINTAINERS: add entry for T-HEAD RISC-V SoC riscv: dts: thead: add sipeed Lichee Pi 4A board device tree riscv: dts: add initial T-HEAD TH1520 SoC device tree riscv: Add the T-HEAD SoC family Kconfig option ... 
Pull ARM SoC devicetree updates from Arnd Bergmann:
 "The biggest change this time is for the 32-bit devicetree files, which
  are all moved to a new location, using separate subdirectories for
  each SoC vendor, following the same scheme that is used on arm64, mips
  and riscv. This has been discussed for many years, but so far we never
  did this as there was a plan to move the files out of the kernel
  entirely, which has never happened.

  The impact of this will be that all external patches no longer apply,
  and anything depending on the location of the dtb files in the build
  directory will have to change. The installed files after 'make
  dtbs_install' keep the current location.

  There are six added SoCs here that are largely variants of previously
  added chips. Two other chips are added in a separate branch along with
  their device drivers.

   - The Samsung Exynos 4212 makes its return after the Samsung Galaxy
     Express phone is addded at last. The SoC support was originally
     added in 2012 but removed again in 2017 as it was unused at the
     time.

   - Amlogic C3 is a Cortex-A35 based smart IP camera chip

   - Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
     the still common MSM8916 (Snapdragon 410) phone chip that has been
     supported for a long time.

   - Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
     laptop chips, used in the Lenovo Flex 5G, which is added along with
     the reference board.

   - Qualcomm SDX75 is the latest generation modem chip that is used as
     a peripherial in phones but can also run a standalone Linux. Unlike
     the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.

   - Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
     Xuantie C910 core, a step up from all previously added rv64 chips.

  All of the above come with reference board implementations, those
  included there are 39 new board files, but only five more 32-bit this
  time, probably a new low:

   - Marantec Maveo board based on dhcor imx6ull module

   - Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip

   - Epson Moverio BT-200 AR glasses based on TI OMAP4

   - PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM

   - ICnova ADB4006 board based on Allwinner A20

  On the 64-bit side, there are also fewer addded machines than we had
  in the recent releases:

   - Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
     EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.

   - NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234

   - Qualcomm gains support for 6 reference boards on various members of
     their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
     phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
     of the various reference platforms for their new chips.

   - Rockchips support for several newer boards: Indiedroid Nova
     (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
     NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
     Fastrhino R66S/R68S (rk3568)

   - TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
     Verdin family with AM62 COM, carrier and dev boards

  Other changes to existing boards contain the usual minor improvements
  along with

   - continued updates to clean up dts files based on dtc warnings and
     binding checks, in particular cache properties and node names

   - support for devicetree overlays on at91, bcm283x

   - significant additions to existing SoC support on mediatek,
     qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
     STM32MP1

  As usual, a lot more detail is available in the individual merge
  commits"

* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
  ARM: mvebu: fix unit address on armada-390-db flash
  ARM: dts: Move .dts files to vendor sub-directories
  kbuild: Support flat DTBs install
  ARM: dts: Add .dts files missing from the build
  ARM: dts: allwinner: Use quoted #include
  ARM: dts: lan966x: kontron-d10: add PHY interrupts
  ARM: dts: lan966x: kontron-d10: fix SPI CS
  ARM: dts: lan966x: kontron-d10: fix board reset
  ARM: dts: at91: Enable device-tree overlay support for AT91 boards
  arm: dts: Enable device-tree overlay support for AT91 boards
  arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
  ARM: dts: at91: use generic name for shutdown controller
  ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
  dt-bindings: firmware: brcm,kona-smc: convert to YAML
  riscv: dts: sort makefile entries by directory
  riscv: defconfig: enable T-HEAD SoC
  MAINTAINERS: add entry for T-HEAD RISC-V SoC
  riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
  riscv: dts: add initial T-HEAD TH1520 SoC device tree
  riscv: Add the T-HEAD SoC family Kconfig option
  ...
Merge tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2023-06-29T21:58:26+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-06-29T21:58:26+00:00 18f38fedfa71b5b7e954fc8f1e31bda75d8f1d7c Pull devicetree updates from Rob Herring: "Bindings: - Add some missing type definitions to properties - Drop unneeded quotes and use absolute paths in bindings - Remove redundant "binding" or "schema" in binding titles - Add bindings for Ralink SoCs interrupt controller, QCA2066 Bluetooth, infineon,irps5401, new NXP i.MX GPT variants, shineworld lh133k MIPI SPI panel, Socionext Synquacer platforms, RK3588 PCIe, ST M95640 EEPROM, and FSL DCP crypto variants, and Arm Cortex-R52 DT core: - Improve the reserved-memory range allocation to maximize contiguous space - Use device_set_node() helper in place of open coding" * tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits) dt-bindings: interrupt-controller: add Ralink SoCs interrupt controller dt-bindings: PCI: dwc: rockchip: Update for RK3588 dt-bindings: auxdisplay: holtek: Add missing type for "linux,no-autorepeat" dt-bindings: input: mediatek,pmic-keys: Fix typo in "linux,keycodes" property name dt-bindings: pwm: drop unneeded quotes dt-bindings: crypto: drop unneeded quotes dt-bindings: arm: socionext: add Synquacer platforms dt-bindings: connector: usb: allow a single HS port dt-bindings: bus: ti-sysc: fix typo of: reserved_mem: Use stable allocation order of: reserved_mem: Try to keep range allocations contiguous dt-bindings: arm: drop unneeded quotes and use absolute /schemas path dt-bindings: firmware: arm,scmi: drop unneeded quotes and use absolute /schemas path dt-bindings: dvfs: drop unneeded quotes dt-bindings: gpu: drop unneeded quotes dt-bindings: i3c: silvaco,i3c-master: drop unneeded quotes dt-bindings: rockchip: grf: drop unneeded quotes dt-bindings: spmi: mtk,spmi-mtk-pmif: drop unneeded quotes dt-bindings: Remove last usage of "binding" or "schema" in titles dt-bindings: display: panel: mipi-dbi-spi: add spi-3wire property ... 
Pull devicetree updates from Rob Herring:
 "Bindings:

   - Add some missing type definitions to properties

   - Drop unneeded quotes and use absolute paths in bindings

   - Remove redundant "binding" or "schema" in binding titles

   - Add bindings for Ralink SoCs interrupt controller, QCA2066
     Bluetooth, infineon,irps5401, new NXP i.MX GPT variants, shineworld
     lh133k MIPI SPI panel, Socionext Synquacer platforms, RK3588 PCIe,
     ST M95640 EEPROM, and FSL DCP crypto variants, and Arm Cortex-R52

  DT core:

   - Improve the reserved-memory range allocation to maximize contiguous
     space

   - Use device_set_node() helper in place of open coding"

* tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits)
  dt-bindings: interrupt-controller: add Ralink SoCs interrupt controller
  dt-bindings: PCI: dwc: rockchip: Update for RK3588
  dt-bindings: auxdisplay: holtek: Add missing type for "linux,no-autorepeat"
  dt-bindings: input: mediatek,pmic-keys: Fix typo in "linux,keycodes" property name
  dt-bindings: pwm: drop unneeded quotes
  dt-bindings: crypto: drop unneeded quotes
  dt-bindings: arm: socionext: add Synquacer platforms
  dt-bindings: connector: usb: allow a single HS port
  dt-bindings: bus: ti-sysc: fix typo
  of: reserved_mem: Use stable allocation order
  of: reserved_mem: Try to keep range allocations contiguous
  dt-bindings: arm: drop unneeded quotes and use absolute /schemas path
  dt-bindings: firmware: arm,scmi: drop unneeded quotes and use absolute /schemas path
  dt-bindings: dvfs: drop unneeded quotes
  dt-bindings: gpu: drop unneeded quotes
  dt-bindings: i3c: silvaco,i3c-master: drop unneeded quotes
  dt-bindings: rockchip: grf: drop unneeded quotes
  dt-bindings: spmi: mtk,spmi-mtk-pmif: drop unneeded quotes
  dt-bindings: Remove last usage of "binding" or "schema" in titles
  dt-bindings: display: panel: mipi-dbi-spi: add spi-3wire property
  ...
dt-bindings: net: altr,tse: Fix error in "compatible" conditional schema 2023-06-23T10:49:11+00:00 Rob Herring robh@kernel.org 2023-06-21T23:10:12+00:00 faaa5fd30344f9a7b3816ae7a6b58ccd5a34998f The conditional if/then schema has an error as the "enum" values have "const" in them. Drop the "const". Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230621231012.3816139-1-robh@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
The conditional if/then schema has an error as the "enum" values have
"const" in them. Drop the "const".

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230621231012.3816139-1-robh@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next 2023-06-23T03:09:13+00:00 Jakub Kicinski kuba@kernel.org 2023-06-23T03:09:13+00:00 e6988447c15d622d11c68250a33f47b3cacb66eb Johannes Berg says: ==================== Notable changes this time around: MAINTAINERS - add missing driver git trees ath11k - factory test mode support iwlwifi - config rework to drop test devices and split the different families - major update for new firmware and MLO stack - initial multi-link reconfiguration suppor - multi-BSSID and MLO improvements other - fix the last few W=1 warnings from GCC 13 - merged wireless tree to avoid conflicts * tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (245 commits) wifi: ieee80211: fix erroneous NSTR bitmap size checks wifi: rtlwifi: cleanup USB interface wifi: rtlwifi: simplify LED management wifi: ath10k: improve structure padding wifi: ath9k: convert msecs to jiffies where needed wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow wifi: iwlwifi: mvm: update two most recent GTKs on D3 resume flow wifi: iwlwifi: mvm: Refactor security key update after D3 wifi: mac80211: mark keys as uploaded when added by the driver wifi: iwlwifi: remove support of A0 version of FM RF wifi: iwlwifi: cfg: clean up Bz module firmware lines wifi: iwlwifi: pcie: add device id 51F1 for killer 1675 wifi: iwlwifi: bump FW API to 83 for AX/BZ/SC devices wifi: iwlwifi: cfg: remove trailing dash from FW_PRE constants wifi: iwlwifi: also unify Ma device configurations wifi: iwlwifi: also unify Sc device configurations wifi: iwlwifi: unify Bz/Gl device configurations wifi: iwlwifi: pcie: also drop jacket from info macro wifi: iwlwifi: remove support for *nJ devices wifi: iwlwifi: don't load old firmware for 22000 ... ==================== Link: https://lore.kernel.org/r/20230622185602.147650-2-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Johannes Berg says:

====================
Notable changes this time around:

MAINTAINERS
 - add missing driver git trees

ath11k
 - factory test mode support

iwlwifi
 - config rework to drop test devices and
   split the different families
 - major update for new firmware and MLO

stack
 - initial multi-link reconfiguration suppor
 - multi-BSSID and MLO improvements

other
 - fix the last few W=1 warnings from GCC 13
 - merged wireless tree to avoid conflicts

* tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (245 commits)
  wifi: ieee80211: fix erroneous NSTR bitmap size checks
  wifi: rtlwifi: cleanup USB interface
  wifi: rtlwifi: simplify LED management
  wifi: ath10k: improve structure padding
  wifi: ath9k: convert msecs to jiffies where needed
  wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow
  wifi: iwlwifi: mvm: update two most recent GTKs on D3 resume flow
  wifi: iwlwifi: mvm: Refactor security key update after D3
  wifi: mac80211: mark keys as uploaded when added by the driver
  wifi: iwlwifi: remove support of A0 version of FM RF
  wifi: iwlwifi: cfg: clean up Bz module firmware lines
  wifi: iwlwifi: pcie: add device id 51F1 for killer 1675
  wifi: iwlwifi: bump FW API to 83 for AX/BZ/SC devices
  wifi: iwlwifi: cfg: remove trailing dash from FW_PRE constants
  wifi: iwlwifi: also unify Ma device configurations
  wifi: iwlwifi: also unify Sc device configurations
  wifi: iwlwifi: unify Bz/Gl device configurations
  wifi: iwlwifi: pcie: also drop jacket from info macro
  wifi: iwlwifi: remove support for *nJ devices
  wifi: iwlwifi: don't load old firmware for 22000
  ...
====================

Link: https://lore.kernel.org/r/20230622185602.147650-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dt-bindings: net: micrel,ks8851: allow SPI device properties 2023-06-21T23:55:44+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2023-06-19T17:01:34+00:00 1ca09f5746edd5e483d144118497f622af9dbe60 The Micrel KS8851 can be attached to SPI or parallel bus and the difference is expressed in compatibles. Allow common SPI properties when this is a SPI variant and narrow the parallel memory bus properties to the second case. This fixes dtbs_check warning: qcom-msm8960-cdp.dtb: ethernet@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230619170134.65395-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
The Micrel KS8851 can be attached to SPI or parallel bus and the
difference is expressed in compatibles.  Allow common SPI properties
when this is a SPI variant and narrow the parallel memory bus properties
to the second case.

This fixes dtbs_check warning:

  qcom-msm8960-cdp.dtb: ethernet@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230619170134.65395-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dt-bindings: net: bluetooth: qualcomm: document VDD_CH1 2023-06-21T23:55:01+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2023-06-17T16:57:16+00:00 6a0a6dd8df9b6e9c0ed8d99bbfb4e5e2f8c9834f WCN3990 comes with two chains - CH0 and CH1 - where each takes VDD regulator. It seems VDD_CH1 is optional (Linux driver does not care about it), so document it to fix dtbs_check warnings like: sdm850-lenovo-yoga-c630.dtb: bluetooth: 'vddch1-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230617165716.279857-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
WCN3990 comes with two chains - CH0 and CH1 - where each takes VDD
regulator.  It seems VDD_CH1 is optional (Linux driver does not care
about it), so document it to fix dtbs_check warnings like:

  sdm850-lenovo-yoga-c630.dtb: bluetooth: 'vddch1-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230617165716.279857-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>