It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP.

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As per the discussion with Nicolas Ferre[0], rename the compatible property
to a more appropriate and specific string.

[0] https://lore.kernel.org/netdev/CAJ2_jOFEVZQat0Yprg4hem4jRrqkB72FKSeQj4p8P5KA-+rgww@mail.gmail.com/

Signed-off-by: Yash Shah <yash.shah@sifive.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

fec's gpio phy reset properties have been deprecated.
Update the dt-bindings documentation to explicitly mark
them as such, and provide a short description of the
recommended alternative.

Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The path in the schema '$id' values are wrong. Fix them.

Signed-off-by: Rob Herring <robh@kernel.org>

Pull ARM Devicetree updates from Olof Johansson:
 "We continue to see a lot of new material. I've highlighted some of it
  below, but there's been more beyond that as well.

  One of the sweeping changes is that many boards have seen their ARM
  Mali GPU devices added to device trees, since the DRM drivers have now
  been merged.

  So, with the caveat that I have surely missed several great
  contributions, here's a collection of the material this time around:

  New SoCs:

   - Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)

   - TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)

   - Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)

  New Boards / platforms:

   - Aspeed BMC support for a number of new server platforms

   - Kontron SMARC SoM (several i.MX6 versions)

   - Novtech's Meerkat96 (i.MX7)

   - ST Micro Avenger96 board

   - Hardkernel ODROID-N2 (Amlogic G12B)

   - Purism Librem5 devkit (i.MX8MQ)

   - Google Cheza (Qualcomm SDM845)

   - Qualcomm Dragonboard 845c (Qualcomm SDM845)

   - Hugsun X99 TV Box (Rockchip RK3399)

   - Khadas Edge/Edge-V/Captain (Rockchip RK3399)

  Updated / expanded boards and platforms:

   - Renesas r7s9210 has a lot of new peripherals added

   - Fixes and polish for Rockchip-based Chromebooks

   - Amlogic G12A has a lot of peripherals added

   - Nvidia Jetson Nano sees various fixes and improvements, and is now
     at feature parity with TX1"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits)
  ARM: dts: gemini: Set DIR-685 SPI CS as active low
  ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa
  ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family
  ARM: dts: exynos: Move Mali400 GPU node to "/soc"
  ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210
  arm64: dts: qcom: qcs404: Add missing space for cooling-cells property
  arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire
  arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs
  arm64: dts: rockchip: enable rk3328 watchdog clock
  ARM: dts: rockchip: add display nodes for rk322x
  ARM: dts: rockchip: fix vop iommu-cells on rk322x
  arm64: dts: rockchip: Add support for Hugsun X99 TV Box
  arm64: dts: rockchip: Define values for the IPA governor for rock960
  arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi
  arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs
  arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance.
  Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie"
  ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron
  arm64: dts: qcom: sdm845-cheza: add initial cheza dt
  ARM: dts: msm8974-FP2: Add vibration motor
  ...

Pull Devicetree updates from Rob Herring:

 - DT binding schema examples are now validated against the schemas.
   Various examples are fixed due to that.

 - Sync dtc with upstream version v1.5.0-30-g702c1b6c0e73

 - Initial schemas for networking bindings. This includes ethernet, phy
   and mdio common bindings with several Allwinner and stmmac converted
   to the schema.

 - Conversion of more Arm top-level SoC/board bindings to DT schema

 - Conversion of PSCI binding to DT schema

 - Rework Arm CPU schema to coexist with other CPU schemas

 - Add a bunch of missing vendor prefixes and new ones for SoChip,
   Sipeed, Kontron, B&R Industrial Automation GmbH, and Espressif

 - Add Mediatek UART RX wakeup support to binding

 - Add reset to ST UART binding

 - Remove some Linuxisms from the endianness common-properties.txt
   binding

 - Make the flattened DT read-only after init

 - Ignore disabled reserved memory nodes

 - Clean-up some dead code in FDT functions

* tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
  dt-bindings: vendor-prefixes: add Sipeed
  dt-bindings: vendor-prefixes: add SoChip
  dt-bindings: 83xx-512x-pci: Drop cell-index property
  dt-bindings: serial: add documentation for Rx in-band wakeup support
  dt-bindings: arm: Convert RDA Micro board/soc bindings to json-schema
  of: unittest: simplify getting the adapter of a client
  of/fdt: pass early_init_dt_reserve_memory_arch() with bool type nomap
  of/platform: Drop superfluous cast in of_device_make_bus_id()
  dt-bindings: usb: ehci: Fix example warnings
  dt-bindings: net: Use phy-mode instead of phy-connection-type
  dt-bindings: simple-framebuffer: Add requirement for pipelines
  dt-bindings: display: Fix simple-framebuffer example
  dt-bindings: net: mdio: Add child nodes
  dt-bindings: net: mdio: Add address and size cells
  dt-bindings: net: mdio: Add a nodename pattern
  dt-bindings: mtd: sunxi-nand: Drop 'maxItems' from child 'reg' property
  dt-bindings: arm: Limit cpus schema to only check Arm 'cpu' nodes
  dt-bindings: backlight: lm3630a: correct schema validation
  dt-bindings: net: dwmac: Deprecate the PHY reset properties
  dt-bindings: net: sun8i-emac: Convert the binding to a schemas
  ...

Pull networking updates from David Miller:
 "Some highlights from this development cycle:

   1) Big refactoring of ipv6 route and neigh handling to support
      nexthop objects configurable as units from userspace. From David
      Ahern.

   2) Convert explored_states in BPF verifier into a hash table,
      significantly decreased state held for programs with bpf2bpf
      calls, from Alexei Starovoitov.

   3) Implement bpf_send_signal() helper, from Yonghong Song.

   4) Various classifier enhancements to mvpp2 driver, from Maxime
      Chevallier.

   5) Add aRFS support to hns3 driver, from Jian Shen.

   6) Fix use after free in inet frags by allocating fqdirs dynamically
      and reworking how rhashtable dismantle occurs, from Eric Dumazet.

   7) Add act_ctinfo packet classifier action, from Kevin
      Darbyshire-Bryant.

   8) Add TFO key backup infrastructure, from Jason Baron.

   9) Remove several old and unused ISDN drivers, from Arnd Bergmann.

  10) Add devlink notifications for flash update status to mlxsw driver,
      from Jiri Pirko.

  11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.

  12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.

  13) Various enhancements to ipv6 flow label handling, from Eric
      Dumazet and Willem de Bruijn.

  14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
      der Merwe, and others.

  15) Various improvements to axienet driver including converting it to
      phylink, from Robert Hancock.

  16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.

  17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
      Radulescu.

  18) Add devlink health reporting to mlx5, from Moshe Shemesh.

  19) Convert stmmac over to phylink, from Jose Abreu.

  20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
      Shalom Toledo.

  21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.

  22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.

  23) Track spill/fill of constants in BPF verifier, from Alexei
      Starovoitov.

  24) Support bounded loops in BPF, from Alexei Starovoitov.

  25) Various page_pool API fixes and improvements, from Jesper Dangaard
      Brouer.

  26) Just like ipv4, support ref-countless ipv6 route handling. From
      Wei Wang.

  27) Support VLAN offloading in aquantia driver, from Igor Russkikh.

  28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.

  29) Add flower GRE encap/decap support to nfp driver, from Pieter
      Jansen van Vuuren.

  30) Protect against stack overflow when using act_mirred, from John
      Hurley.

  31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.

  32) Use page_pool API in netsec driver, Ilias Apalodimas.

  33) Add Google gve network driver, from Catherine Sullivan.

  34) More indirect call avoidance, from Paolo Abeni.

  35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.

  36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.

  37) Add MPLS manipulation actions to TC, from John Hurley.

  38) Add sending a packet to connection tracking from TC actions, and
      then allow flower classifier matching on conntrack state. From
      Paul Blakey.

  39) Netfilter hw offload support, from Pablo Neira Ayuso"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
  net/mlx5e: Return in default case statement in tx_post_resync_params
  mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
  net: dsa: add support for BRIDGE_MROUTER attribute
  pkt_sched: Include const.h
  net: netsec: remove static declaration for netsec_set_tx_de()
  net: netsec: remove superfluous if statement
  netfilter: nf_tables: add hardware offload support
  net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
  net: flow_offload: add flow_block_cb_is_busy() and use it
  net: sched: remove tcf block API
  drivers: net: use flow block API
  net: sched: use flow block API
  net: flow_offload: add flow_block_cb_{priv, incref, decref}()
  net: flow_offload: add list handling functions
  net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
  net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
  net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
  net: flow_offload: add flow_block_cb_setup_simple()
  net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
  net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
  ...

In general, group is the same as the port, but some
boards specify a special group for better load
balancing of each processing unit.

Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Armada 8040 needs four clocks to be enabled for MDIO accesses to work.
Update the binding to allow the extra clock to be specified.

Cc: stable@vger.kernel.org
Fixes: 6d6a331f44a1 ("dt-bindings: allow up to three clocks for orion-mdio")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull Documentation updates from Jonathan Corbet:
 "It's been a relatively busy cycle for docs:

   - A fair pile of RST conversions, many from Mauro. These create more
     than the usual number of simple but annoying merge conflicts with
     other trees, unfortunately. He has a lot more of these waiting on
     the wings that, I think, will go to you directly later on.

   - A new document on how to use merges and rebases in kernel repos,
     and one on Spectre vulnerabilities.

   - Various improvements to the build system, including automatic
     markup of function() references because some people, for reasons I
     will never understand, were of the opinion that
     :c:func:``function()`` is unattractive and not fun to type.

   - We now recommend using sphinx 1.7, but still support back to 1.4.

   - Lots of smaller improvements, warning fixes, typo fixes, etc"

* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
  docs: automarkup.py: ignore exceptions when seeking for xrefs
  docs: Move binderfs to admin-guide
  Disable Sphinx SmartyPants in HTML output
  doc: RCU callback locks need only _bh, not necessarily _irq
  docs: format kernel-parameters -- as code
  Doc : doc-guide : Fix a typo
  platform: x86: get rid of a non-existent document
  Add the RCU docs to the core-api manual
  Documentation: RCU: Add TOC tree hooks
  Documentation: RCU: Rename txt files to rst
  Documentation: RCU: Convert RCU UP systems to reST
  Documentation: RCU: Convert RCU linked list to reST
  Documentation: RCU: Convert RCU basic concepts to reST
  docs: filesystems: Remove uneeded .rst extension on toctables
  scripts/sphinx-pre-install: fix out-of-tree build
  docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
  Documentation: PGP: update for newer HW devices
  Documentation: Add section about CPU vulnerabilities for Spectre
  Documentation: platform: Delete x86-laptop-drivers.txt
  docs: Note that :c:func: should no longer be used
  ...