<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/Documentation/devicetree/bindings/net, branch v5.11</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>Merge tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux</title>
<updated>2021-01-30T19:53:14+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2021-01-30T19:53:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=8c947645151cc2c279c75c7f640dd8f0fc0b9aa2'/>
<id>8c947645151cc2c279c75c7f640dd8f0fc0b9aa2</id>
<content type='text'>
Pull devicetree fixes from Rob Herring:

 - Cleanups on properties with standard unit suffixes

 - Fix overwriting dma_range_map if there's no 'dma-ranges' property

 - Fix a bug when creating a /chosen node from ARM ATAGs

 - Add missing properties for TI j721e USB binding

 - Several doc reference updates due to DT schema conversions

* tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Cleanup standard unit properties
  of/device: Update dma_range_map only when dev has valid dma-ranges
  ARM: zImage: atags_to_fdt: Fix node names on added root nodes
  dt-bindings: usb: j721e: add ranges and dma-coherent props
  dt-bindings:iio:adc: update adc.yaml reference
  dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references
  dt-bindings: display: mediatek: update mediatek,dpi.yaml reference
  ASoC: audio-graph-card: update audio-graph-card.yaml reference
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull devicetree fixes from Rob Herring:

 - Cleanups on properties with standard unit suffixes

 - Fix overwriting dma_range_map if there's no 'dma-ranges' property

 - Fix a bug when creating a /chosen node from ARM ATAGs

 - Add missing properties for TI j721e USB binding

 - Several doc reference updates due to DT schema conversions

* tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Cleanup standard unit properties
  of/device: Update dma_range_map only when dev has valid dma-ranges
  ARM: zImage: atags_to_fdt: Fix node names on added root nodes
  dt-bindings: usb: j721e: add ranges and dma-coherent props
  dt-bindings:iio:adc: update adc.yaml reference
  dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references
  dt-bindings: display: mediatek: update mediatek,dpi.yaml reference
  ASoC: audio-graph-card: update audio-graph-card.yaml reference
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: Cleanup standard unit properties</title>
<updated>2021-01-29T22:36:06+00:00</updated>
<author>
<name>Rob Herring</name>
<email>robh@kernel.org</email>
</author>
<published>2021-01-28T19:45:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=32ada6b0980d86133d080d62371a5787ea2ec5ed'/>
<id>32ada6b0980d86133d080d62371a5787ea2ec5ed</id>
<content type='text'>
Properties with standard unit suffixes already have a type and don't need
type definitions. They also default to a single entry, so 'maxItems: 1'
can be dropped.

adi,ad5758 is an oddball which defined an enum of arrays. While a valid
schema, it is simpler as a whole to only define scalar constraints.

Cc: Jean Delvare &lt;jdelvare@suse.com&gt;
Cc: Lars-Peter Clausen &lt;lars@metafoo.de&gt;
Cc: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Cc: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
Cc: "David S. Miller" &lt;davem@davemloft.net&gt;
Cc: Jakub Kicinski &lt;kuba@kernel.org&gt;
Cc: Serge Semin &lt;fancer.lancer@gmail.com&gt;
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-input@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring &lt;robh@kernel.org&gt;
Acked-by: Guenter Roeck &lt;linux@roeck-us.net&gt;
Acked-by: Mark Brown &lt;broonie@kernel.org&gt;
Acked-by: Wolfram Sang &lt;wsa@kernel.org&gt; # for I2C
Acked-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Acked-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Acked-by: Sebastian Reichel &lt;sre@kernel.org&gt; # for power-supply
Acked-by: Jonathan Cameron &lt;Jonathan.Cameron@huawei.com&gt; #for-iio
Acked-by: Alexandre TORGUE &lt;alexandre.torgue@foss.st.com&gt;
Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Properties with standard unit suffixes already have a type and don't need
type definitions. They also default to a single entry, so 'maxItems: 1'
can be dropped.

adi,ad5758 is an oddball which defined an enum of arrays. While a valid
schema, it is simpler as a whole to only define scalar constraints.

Cc: Jean Delvare &lt;jdelvare@suse.com&gt;
Cc: Lars-Peter Clausen &lt;lars@metafoo.de&gt;
Cc: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Cc: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
Cc: "David S. Miller" &lt;davem@davemloft.net&gt;
Cc: Jakub Kicinski &lt;kuba@kernel.org&gt;
Cc: Serge Semin &lt;fancer.lancer@gmail.com&gt;
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-input@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring &lt;robh@kernel.org&gt;
Acked-by: Guenter Roeck &lt;linux@roeck-us.net&gt;
Acked-by: Mark Brown &lt;broonie@kernel.org&gt;
Acked-by: Wolfram Sang &lt;wsa@kernel.org&gt; # for I2C
Acked-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Acked-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Acked-by: Sebastian Reichel &lt;sre@kernel.org&gt; # for power-supply
Acked-by: Jonathan Cameron &lt;Jonathan.Cameron@huawei.com&gt; #for-iio
Acked-by: Alexandre TORGUE &lt;alexandre.torgue@foss.st.com&gt;
Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: net: dwmac: fix queue priority documentation</title>
<updated>2021-01-11T23:18:47+00:00</updated>
<author>
<name>Seb Laveze</name>
<email>sebastien.laveze@nxp.com</email>
</author>
<published>2021-01-11T08:14:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=938288349ca8a9d4b936bf5d2f6dd4526a598974'/>
<id>938288349ca8a9d4b936bf5d2f6dd4526a598974</id>
<content type='text'>
The priority field is not the queue priority (queue priority is fixed)
but a bitmask of priorities assigned to this queue.

In receive, priorities relate to tagged frames priorities.

In transmit, priorities relate to PFC frames.

Signed-off-by: Seb Laveze &lt;sebastien.laveze@nxp.com&gt;
Link: https://lore.kernel.org/r/20210111081406.1348622-1-sebastien.laveze@oss.nxp.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The priority field is not the queue priority (queue priority is fixed)
but a bitmask of priorities assigned to this queue.

In receive, priorities relate to tagged frames priorities.

In transmit, priorities relate to PFC frames.

Signed-off-by: Seb Laveze &lt;sebastien.laveze@nxp.com&gt;
Link: https://lore.kernel.org/r/20210111081406.1348622-1-sebastien.laveze@oss.nxp.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: net: renesas,etheravb: RZ/G2H needs tx-internal-delay-ps</title>
<updated>2021-01-10T03:12:21+00:00</updated>
<author>
<name>Geert Uytterhoeven</name>
<email>geert+renesas@glider.be</email>
</author>
<published>2021-01-05T15:15:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=f97844f9c518172f813b7ece18a9956b1f70c1bb'/>
<id>f97844f9c518172f813b7ece18a9956b1f70c1bb</id>
<content type='text'>
The merge resolution of the interaction of commits 307eea32b202864c
("dt-bindings: net: renesas,ravb: Add support for r8a774e1 SoC") and
d7adf6331189cbe9 ("dt-bindings: net: renesas,etheravb: Convert to
json-schema") missed that "tx-internal-delay-ps" should be a required
property on RZ/G2H.

Fixes: 8b0308fe319b8002 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Geert Uytterhoeven &lt;geert+renesas@glider.be&gt;
Link: https://lore.kernel.org/r/20210105151516.1540653-1-geert+renesas@glider.be
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The merge resolution of the interaction of commits 307eea32b202864c
("dt-bindings: net: renesas,ravb: Add support for r8a774e1 SoC") and
d7adf6331189cbe9 ("dt-bindings: net: renesas,etheravb: Convert to
json-schema") missed that "tx-internal-delay-ps" should be a required
property on RZ/G2H.

Fixes: 8b0308fe319b8002 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Geert Uytterhoeven &lt;geert+renesas@glider.be&gt;
Link: https://lore.kernel.org/r/20210105151516.1540653-1-geert+renesas@glider.be
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: net: qcom,ipa: Drop unnecessary type ref on 'memory-region'</title>
<updated>2020-12-23T01:58:23+00:00</updated>
<author>
<name>Rob Herring</name>
<email>robh@kernel.org</email>
</author>
<published>2020-12-22T04:01:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=246eedd70da91d57bf485bd558c50f7b2286c462'/>
<id>246eedd70da91d57bf485bd558c50f7b2286c462</id>
<content type='text'>
'memory-region' is a common property, so it doesn't need a type ref here.

Cc: "David S. Miller" &lt;davem@davemloft.net&gt;
Cc: Jakub Kicinski &lt;kuba@kernel.org&gt;
Cc: Alex Elder &lt;elder@kernel.org&gt;
Cc: netdev@vger.kernel.org
Acked-by: Alex Elder &lt;elder@linaro.org&gt;
Link: https://lore.kernel.org/r/20201222040121.1314370-1-robh@kernel.org
Signed-off-by: Rob Herring &lt;robh@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
'memory-region' is a common property, so it doesn't need a type ref here.

Cc: "David S. Miller" &lt;davem@davemloft.net&gt;
Cc: Jakub Kicinski &lt;kuba@kernel.org&gt;
Cc: Alex Elder &lt;elder@kernel.org&gt;
Cc: netdev@vger.kernel.org
Acked-by: Alex Elder &lt;elder@linaro.org&gt;
Link: https://lore.kernel.org/r/20201222040121.1314370-1-robh@kernel.org
Signed-off-by: Rob Herring &lt;robh@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: Fix JSON pointers</title>
<updated>2020-12-18T21:14:44+00:00</updated>
<author>
<name>Rob Herring</name>
<email>robh@kernel.org</email>
</author>
<published>2020-12-17T22:34:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=d69c6ddd019f31081cc0232fa8ad8ea1cabdf22c'/>
<id>d69c6ddd019f31081cc0232fa8ad8ea1cabdf22c</id>
<content type='text'>
The correct syntax for JSON pointers begins with a '/' after the '#'.
Without a '/', the string should be interpreted as a subschema
identifier. The jsonschema module currently doesn't handle subschema
identifiers and incorrectly allows JSON pointers to begin without a '/'.
Let's fix this before it becomes a problem when jsonschema module is
fixed.

Converted with:
perl -p -i -e 's/yaml#definitions/yaml#\/definitions/g' `find Documentation/devicetree/bindings/ -name "*.yaml"`

Cc: Maxime Ripard &lt;mripard@kernel.org&gt;
Cc: Jonathan Cameron &lt;jic23@kernel.org&gt;
Cc: Lars-Peter Clausen &lt;lars@metafoo.de&gt;
Cc: Daniel Thompson &lt;daniel.thompson@linaro.org&gt;
Cc: Jingoo Han &lt;jingoohan1@gmail.com&gt;
Cc: Pavel Machek &lt;pavel@ucw.cz&gt;
Cc: "David S. Miller" &lt;davem@davemloft.net&gt;
Cc: Jakub Kicinski &lt;kuba@kernel.org&gt;
Cc: Andrew Lunn &lt;andrew@lunn.ch&gt;
Cc: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Cc: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Cc: Mark Brown &lt;broonie@kernel.org&gt;
Cc: netdev@vger.kernel.org
Acked-By: Vinod Koul &lt;vkoul@kernel.org&gt;
Acked-by: Lee Jones &lt;lee.jones@linaro.org&gt;
Acked-by: Guenter Roeck &lt;linux@roeck-us.net&gt;
Acked-by: Sebastian Reichel &lt;sre@kernel.org&gt;
Acked-by: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Acked-by: Mark Brown &lt;broonie@kernel.org&gt;
Acked-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Link: https://lore.kernel.org/r/20201217223429.354283-1-robh@kernel.org
Signed-off-by: Rob Herring &lt;robh@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The correct syntax for JSON pointers begins with a '/' after the '#'.
Without a '/', the string should be interpreted as a subschema
identifier. The jsonschema module currently doesn't handle subschema
identifiers and incorrectly allows JSON pointers to begin without a '/'.
Let's fix this before it becomes a problem when jsonschema module is
fixed.

Converted with:
perl -p -i -e 's/yaml#definitions/yaml#\/definitions/g' `find Documentation/devicetree/bindings/ -name "*.yaml"`

Cc: Maxime Ripard &lt;mripard@kernel.org&gt;
Cc: Jonathan Cameron &lt;jic23@kernel.org&gt;
Cc: Lars-Peter Clausen &lt;lars@metafoo.de&gt;
Cc: Daniel Thompson &lt;daniel.thompson@linaro.org&gt;
Cc: Jingoo Han &lt;jingoohan1@gmail.com&gt;
Cc: Pavel Machek &lt;pavel@ucw.cz&gt;
Cc: "David S. Miller" &lt;davem@davemloft.net&gt;
Cc: Jakub Kicinski &lt;kuba@kernel.org&gt;
Cc: Andrew Lunn &lt;andrew@lunn.ch&gt;
Cc: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Cc: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Cc: Mark Brown &lt;broonie@kernel.org&gt;
Cc: netdev@vger.kernel.org
Acked-By: Vinod Koul &lt;vkoul@kernel.org&gt;
Acked-by: Lee Jones &lt;lee.jones@linaro.org&gt;
Acked-by: Guenter Roeck &lt;linux@roeck-us.net&gt;
Acked-by: Sebastian Reichel &lt;sre@kernel.org&gt;
Acked-by: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Acked-by: Mark Brown &lt;broonie@kernel.org&gt;
Acked-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Link: https://lore.kernel.org/r/20201217223429.354283-1-robh@kernel.org
Signed-off-by: Rob Herring &lt;robh@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc</title>
<updated>2020-12-17T00:27:35+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2020-12-17T00:27:35+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=9805529ec544ea7a82d891d5239a8ebd3dbb2a3e'/>
<id>9805529ec544ea7a82d891d5239a8ebd3dbb2a3e</id>
<content type='text'>
Pull ARM device tree updates from Arnd Bergmann:
 "Across all platforms, there is a continued move towards DT schema for
  validating the dts files. As a result there are bug fixes for mistakes
  that are found using these schema, in addition to warnings from the
  dtc compiler.

  As usual, many changes are for adding support for additional on-chip
  and on-board components in the machines we already support.

  The newly supported SoCs for this release are:

   - MStar Infinity2M, a low-end IP camera chip based on a dual-core
     Cortex-A7, otherwise similar to the Infinity chip we already
     support. This is also known as the SigmaStar SSD202D, and we add
     support for the Honestar ssd201htv2 development kit.

   - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
     (BMC), in the same family as the NPCM750. This gets used in the
     Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
     which are added as well.

   - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
     Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
     GT-AC5300 high-end WiFi router based on this chip.

   - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
     meant for faster Chromebooks and tablets. It gets added along with
     its reference design.

   - Mediatek MT6779 (Helio P90) is a high-end phone chip from last
     year's generation, also added along with its reference board. This
     one is still based on Cortex-A75/A55.

   - Mediatek MT8167 is a version of the already supported MT8516 chip,
     both based on Cortex-A35. It gets added along with the "Pumpkin"
     single board computer, but is likely to also make its way into
     low-end tablets in the future.

  For the already supported chips, there are a number of new boards.
  Interestingly there are more 32-bit machines added this time than
  64-bit. Here is a brief list of the new boards:

   - Three new Mikrotik router variants based on Marvell Prestera
     98DX3236, a close relative of the more common Armada XP

   - A reference board for the Marvell Armada 382

   - Three new servers using ASpeed baseboard management controllers,
     the actual machines being from Bytedance, Facebook and IBM, and one
     machine using the Nuvoton NPCM750 BMC.

   - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.

   - The usual set of 32-bit i.MX industrial/embedded hardware:
       * Protonic WD3 (tractor e-cockpit)
       * Kamstrup OMNIA Flex Concentrator (smart grid platform)
       * Van der Laan LANMCU (food storage)
       * Altesco I6P (vehicle inspection stations)
       * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard

   - DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
     aleady supported DHCOM module

   - Three new Allwinner SoC based single-board computers:
       * NanoPi R1 (H3 based)
       * FriendlyArm ZeroPi (H3 based)
       * Elimo Initium SBC (S3 based)

   - Ouya Game Console based on Nvidia Tegra 3

   - Version 5 of the already supported Zynq Z-Turn MYIR Board

   - LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
     is a repackaged 16-core LX2160A

   - A series of Kontron i.MX8M Mini baseboard/SoM versions

   - Espressobin Ultra, a new variant of the popular Armada 3700 based
     board,

   - IEI Puzzle-M801, a rackmount network appliance based on Marvell
     Armada 8040

   - Microsoft Lumia 950 XL, a phone

   - HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
     sm8150, respectively

   - Three new board variants of the "Trogdor" Chromebook (sc7180)

   - New board variants of the Renesas based "Kingfisher" and "HiHope"
     reference boards

   - Kobol Helios64, an open source NAS appliance based on Rockchips
     RK3399

   - Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
     carrier boards"

* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
  arm64: dts: sparx5: Add SGPIO devices
  arm64: dts: sparx5: Add reset support
  dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
  ARM: mstar: SMP support
  ARM: mstar: Wire up smpctrl for SSD201/SSD202D
  ARM: mstar: Add smp ctrl registers to infinity2m dtsi
  ARM: mstar: Add dts for Honestar ssd201htv2
  ARM: mstar: Add chip level dtsi for SSD202D
  ARM: mstar: Add common dtsi for SSD201/SSD202D
  ARM: mstar: Add infinity2m support
  dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
  dt-bindings: vendor-prefixes: Add honestar vendor prefix
  dt-bindings: mstar: Add binding details for mstar,smpctrl
  ARM: mstar: Fill in GPIO controller properties for infinity
  ARM: mstar: Add gpio controller to MStar base dtsi
  ARM: zynq: Fix incorrect reference to XM013 instead of XM011
  ARM: zynq: Convert at25 binding to new description on zc770-xm013
  ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
  ARM: zynq: Fix leds subnode name for zc702/zybo-z7
  ARM: zynq: Rename bus to be align with simple-bus yaml
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull ARM device tree updates from Arnd Bergmann:
 "Across all platforms, there is a continued move towards DT schema for
  validating the dts files. As a result there are bug fixes for mistakes
  that are found using these schema, in addition to warnings from the
  dtc compiler.

  As usual, many changes are for adding support for additional on-chip
  and on-board components in the machines we already support.

  The newly supported SoCs for this release are:

   - MStar Infinity2M, a low-end IP camera chip based on a dual-core
     Cortex-A7, otherwise similar to the Infinity chip we already
     support. This is also known as the SigmaStar SSD202D, and we add
     support for the Honestar ssd201htv2 development kit.

   - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
     (BMC), in the same family as the NPCM750. This gets used in the
     Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
     which are added as well.

   - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
     Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
     GT-AC5300 high-end WiFi router based on this chip.

   - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
     meant for faster Chromebooks and tablets. It gets added along with
     its reference design.

   - Mediatek MT6779 (Helio P90) is a high-end phone chip from last
     year's generation, also added along with its reference board. This
     one is still based on Cortex-A75/A55.

   - Mediatek MT8167 is a version of the already supported MT8516 chip,
     both based on Cortex-A35. It gets added along with the "Pumpkin"
     single board computer, but is likely to also make its way into
     low-end tablets in the future.

  For the already supported chips, there are a number of new boards.
  Interestingly there are more 32-bit machines added this time than
  64-bit. Here is a brief list of the new boards:

   - Three new Mikrotik router variants based on Marvell Prestera
     98DX3236, a close relative of the more common Armada XP

   - A reference board for the Marvell Armada 382

   - Three new servers using ASpeed baseboard management controllers,
     the actual machines being from Bytedance, Facebook and IBM, and one
     machine using the Nuvoton NPCM750 BMC.

   - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.

   - The usual set of 32-bit i.MX industrial/embedded hardware:
       * Protonic WD3 (tractor e-cockpit)
       * Kamstrup OMNIA Flex Concentrator (smart grid platform)
       * Van der Laan LANMCU (food storage)
       * Altesco I6P (vehicle inspection stations)
       * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard

   - DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
     aleady supported DHCOM module

   - Three new Allwinner SoC based single-board computers:
       * NanoPi R1 (H3 based)
       * FriendlyArm ZeroPi (H3 based)
       * Elimo Initium SBC (S3 based)

   - Ouya Game Console based on Nvidia Tegra 3

   - Version 5 of the already supported Zynq Z-Turn MYIR Board

   - LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
     is a repackaged 16-core LX2160A

   - A series of Kontron i.MX8M Mini baseboard/SoM versions

   - Espressobin Ultra, a new variant of the popular Armada 3700 based
     board,

   - IEI Puzzle-M801, a rackmount network appliance based on Marvell
     Armada 8040

   - Microsoft Lumia 950 XL, a phone

   - HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
     sm8150, respectively

   - Three new board variants of the "Trogdor" Chromebook (sc7180)

   - New board variants of the Renesas based "Kingfisher" and "HiHope"
     reference boards

   - Kobol Helios64, an open source NAS appliance based on Rockchips
     RK3399

   - Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
     carrier boards"

* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
  arm64: dts: sparx5: Add SGPIO devices
  arm64: dts: sparx5: Add reset support
  dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
  ARM: mstar: SMP support
  ARM: mstar: Wire up smpctrl for SSD201/SSD202D
  ARM: mstar: Add smp ctrl registers to infinity2m dtsi
  ARM: mstar: Add dts for Honestar ssd201htv2
  ARM: mstar: Add chip level dtsi for SSD202D
  ARM: mstar: Add common dtsi for SSD201/SSD202D
  ARM: mstar: Add infinity2m support
  dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
  dt-bindings: vendor-prefixes: Add honestar vendor prefix
  dt-bindings: mstar: Add binding details for mstar,smpctrl
  ARM: mstar: Fill in GPIO controller properties for infinity
  ARM: mstar: Add gpio controller to MStar base dtsi
  ARM: zynq: Fix incorrect reference to XM013 instead of XM011
  ARM: zynq: Convert at25 binding to new description on zc770-xm013
  ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
  ARM: zynq: Fix leds subnode name for zc702/zybo-z7
  ARM: zynq: Rename bus to be align with simple-bus yaml
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'devicetree-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux</title>
<updated>2020-12-16T23:08:28+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2020-12-16T23:08:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=62746f92b10a4add6a7db87ff59b901276746b11'/>
<id>62746f92b10a4add6a7db87ff59b901276746b11</id>
<content type='text'>
Pull devicetree updates from Rob Herring:

 - Add vendor prefixes for bm, gpio-key, mentor, FII, and Ampere

 - Add ADP5585/ADP5589 and delta,q54sj108a2 to trivial-devices.yaml

 - Convert fixed-partitions, i2c-gate and fsl,dpaa2-console bindings to
   schemas

 - Drop PicoXcell bindings

 - Drop unused and undocumented 'pnx,timeout' property from LPC32xx

 - Add 'dynamic-power-coefficient' to Mali GPU bindings

 - Make 'make dt_binding_check' not error out on warnings

 - Various minor binding fixes

* tag 'devicetree-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (22 commits)
  dt-bindings: mali-bifrost: Add dynamic-power-coefficient
  dt-bindings: mali-midgard: Add dynamic-power-coefficient
  dt-bindings: i2c: dw: cancel mandatory requirements for "#address-cells" and "#size-cells"
  dt-bindings: Remove PicoXcell bindings
  ARM: dts: lpc32xx: Remove unused and undocumented 'pnx,timeout'
  dt-bindings: mtd: convert "fixed-partitions" to the json-schema
  dt-bindings: vendor-prefixes: Add undocumented bm, gpio-key, and mentor prefixes
  dt-bindings: pci: rcar-pci-ep: Document missing interrupts property
  dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com
  dt-bindings: vendor-prefixes: correct the spelling of TQ-Systems GmbH
  dt-bindings: mfd: fix stm32 timers example
  dt-bindings: trivial-devices: Add delta,q54sj108a2
  dt-bindings:i2c:i2c-gate: txt to yaml conversion
  dt-bindings: add ADP5585/ADP5589 entries to trivial-devices
  dt-bindings: Correct GV11B GPU register sizes
  dt-bindings: vendor-prefixes: Add FII
  dt-bindings: Fix typo on the DesignWare IP reset bindings documentation
  dt-bindings: Fix error in 'make dtbs_check' when using DT_SCHEMA_FILES
  dt-bindings: arm: vt8500: remove redundant white-spaces
  dt-bindings: fsl-imx-drm: fix example compatible string
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull devicetree updates from Rob Herring:

 - Add vendor prefixes for bm, gpio-key, mentor, FII, and Ampere

 - Add ADP5585/ADP5589 and delta,q54sj108a2 to trivial-devices.yaml

 - Convert fixed-partitions, i2c-gate and fsl,dpaa2-console bindings to
   schemas

 - Drop PicoXcell bindings

 - Drop unused and undocumented 'pnx,timeout' property from LPC32xx

 - Add 'dynamic-power-coefficient' to Mali GPU bindings

 - Make 'make dt_binding_check' not error out on warnings

 - Various minor binding fixes

* tag 'devicetree-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (22 commits)
  dt-bindings: mali-bifrost: Add dynamic-power-coefficient
  dt-bindings: mali-midgard: Add dynamic-power-coefficient
  dt-bindings: i2c: dw: cancel mandatory requirements for "#address-cells" and "#size-cells"
  dt-bindings: Remove PicoXcell bindings
  ARM: dts: lpc32xx: Remove unused and undocumented 'pnx,timeout'
  dt-bindings: mtd: convert "fixed-partitions" to the json-schema
  dt-bindings: vendor-prefixes: Add undocumented bm, gpio-key, and mentor prefixes
  dt-bindings: pci: rcar-pci-ep: Document missing interrupts property
  dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com
  dt-bindings: vendor-prefixes: correct the spelling of TQ-Systems GmbH
  dt-bindings: mfd: fix stm32 timers example
  dt-bindings: trivial-devices: Add delta,q54sj108a2
  dt-bindings:i2c:i2c-gate: txt to yaml conversion
  dt-bindings: add ADP5585/ADP5589 entries to trivial-devices
  dt-bindings: Correct GV11B GPU register sizes
  dt-bindings: vendor-prefixes: Add FII
  dt-bindings: Fix typo on the DesignWare IP reset bindings documentation
  dt-bindings: Fix error in 'make dtbs_check' when using DT_SCHEMA_FILES
  dt-bindings: arm: vt8500: remove redundant white-spaces
  dt-bindings: fsl-imx-drm: fix example compatible string
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: Remove PicoXcell bindings</title>
<updated>2020-12-14T14:34:58+00:00</updated>
<author>
<name>Rob Herring</name>
<email>robh@kernel.org</email>
</author>
<published>2020-12-10T20:03:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=a217d8711da5c87fd2862fc36759b6fafa1c4905'/>
<id>a217d8711da5c87fd2862fc36759b6fafa1c4905</id>
<content type='text'>
PicoXcell has had nothing but treewide cleanups for at least the last 8
years and no signs of activity. The most recent activity is a yocto vendor
kernel based on v3.0 in 2015.

Cc: linux-crypto@vger.kernel.org
Acked-by: Jamie Iles &lt;jamie@jamieiles.com&gt;
Link: https://lore.kernel.org/r/20201210200315.2965567-5-robh@kernel.org
Signed-off-by: Rob Herring &lt;robh@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
PicoXcell has had nothing but treewide cleanups for at least the last 8
years and no signs of activity. The most recent activity is a yocto vendor
kernel based on v3.0 in 2015.

Cc: linux-crypto@vger.kernel.org
Acked-by: Jamie Iles &lt;jamie@jamieiles.com&gt;
Link: https://lore.kernel.org/r/20201210200315.2965567-5-robh@kernel.org
Signed-off-by: Rob Herring &lt;robh@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger type</title>
<updated>2020-12-10T00:49:46+00:00</updated>
<author>
<name>Bongsu Jeon</name>
<email>bongsu.jeon@samsung.com</email>
</author>
<published>2020-12-08T14:10:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=b783ff46ef4c80c666ed2186f471b7173db63976'/>
<id>b783ff46ef4c80c666ed2186f471b7173db63976</id>
<content type='text'>
Change interrupt trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING
 for stable NFC I2C interrupt handling.
Samsung's NFC Firmware sends an i2c frame as below.
1. NFC Firmware sets the GPIO(interrupt pin) high when there is an i2c
 frame to send.
2. If the CPU's I2C master has received the i2c frame, NFC F/W sets the
GPIO low.
NFC driver's i2c interrupt handler would be called in the abnormal case
as the NFC FW task of number 2 is delayed because of other high priority
tasks.
In that case, NFC driver will try to receive the i2c frame but there isn't
 any i2c frame to send in NFC.
It would cause an I2C communication problem. This case would hardly happen.
But, I changed the interrupt as a defense code.
If Driver uses the TRIGGER_RISING instead of the LEVEL trigger,
there would be no problem even if the NFC FW task is delayed.

Signed-off-by: Bongsu Jeon &lt;bongsu.jeon@samsung.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Change interrupt trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING
 for stable NFC I2C interrupt handling.
Samsung's NFC Firmware sends an i2c frame as below.
1. NFC Firmware sets the GPIO(interrupt pin) high when there is an i2c
 frame to send.
2. If the CPU's I2C master has received the i2c frame, NFC F/W sets the
GPIO low.
NFC driver's i2c interrupt handler would be called in the abnormal case
as the NFC FW task of number 2 is delayed because of other high priority
tasks.
In that case, NFC driver will try to receive the i2c frame but there isn't
 any i2c frame to send in NFC.
It would cause an I2C communication problem. This case would hardly happen.
But, I changed the interrupt as a defense code.
If Driver uses the TRIGGER_RISING instead of the LEVEL trigger,
there would be no problem even if the NFC FW task is delayed.

Signed-off-by: Bongsu Jeon &lt;bongsu.jeon@samsung.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
</feed>
