linux.git/Documentation/devicetree/bindings/net, branch v4.16

net: dsa: mv88e6xxx: Fix binding documentation for MDIO busses

2018-03-16T19:01:34+00:00

The MDIO busses are switch properties and so should be inside the
switch node. Fix the examples in the binding document.

Reported-by: 尤晓杰 
Signed-off-by: Andrew Lunn 
Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Signed-off-by: David S. Miller

dt-bindings: net: renesas-ravb: Make stream buffer optional

2018-03-07T15:22:38+00:00

The Stream Buffer for EtherAVB-IF (STBE) is an optional component, and
is not present on all SoCs.

Document this in the DT bindings, including a list of SoCs that do have
it.

Fixes: 785ec87483d1e24a ("ravb: document R8A77970 bindings")
Fixes: f231c4178a655b09 ("dt-bindings: net: renesas-ravb: Add support for R8A77995 RAVB")
Signed-off-by: Geert Uytterhoeven 
Reviewed-by: Simon Horman 
Acked-by: Sergei Shtylyov 
Reviewed-by: Rob Herring 
Signed-off-by: David S. Miller

DT: net: renesas,ravb: document R8A77980 bindings

2018-02-26T20:10:31+00:00

Renesas R-Car V3H (R8A77980) SoC has the R-Car gen3 compatible EtherAVB
device, so document the SoC specific bindings.

Signed-off-by: Sergei Shtylyov 
Reviewed-by: Geert Uytterhoeven 
Reviewed-by: Simon Horman 
Reviewed-by: Rob Herring 
Signed-off-by: David S. Miller

Merge tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2018-02-01T18:57:45+00:00

Pull DeviceTree updates from Rob Herring:

 - Convert to use memblock_virt_alloc in DT code which supports
   bootmem arches. With this we can remove the arch specific
   early_init_dt_alloc_memory_arch() functions.

 - Enable running the DT unittests on UML

 - Use SPDX license tags on DT files

 - Fix early FDT kconfig ifdef logic

 - Clean-up unittest Makefile

 - Fix function comment for of_irq_parse_raw

 - Add missing documentation for linux,initrd-{start,end} properties

 - Clean-up of binding examples using uppercase hex

 - Add trivial devices W83773G and Infineon TLV493D-A1B6

 - Add missing STM32 SoC bindings

 - Various small binding doc fixes

* tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits)
  xtensa: remove arch specific early DT functions
  x86: remove arch specific early_init_dt_alloc_memory_arch
  nios2: remove arch specific early_init_dt_alloc_memory_arch
  mips: remove arch specific early_init_dt_alloc_memory_arch
  metag: remove arch specific early DT functions
  cris: remove arch specific early DT functions
  libfdt: remove unnecessary include directive from 
  of: unittest: refactor Makefile
  of/fdt: use memblock_virt_alloc for early alloc
  of: Use SPDX license tag for DT files
  of/fdt: Fix #ifdef dependency of early flattree declarations
  dt-bindings: h8300 clocksource: correct spelling of pulse
  dt-bindings: imx6q-pcie: Add required property for i.MX6SX
  mmc: Don't reference Linux-specific OF_GPIO_ACTIVE_LOW flag in DT binding
  dt-bindings: Use lower case hex in unit-addresses
  dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000
  dt-bindings: Add Infineon TLV493D-A1B6
  dt-bindings: mailbox: ti,message-manager: Fix interrupt name error
  dt-bindings: chosen: Document linux,initrd-{start,end}
  dt-bindings: arm: document supported STM32 SoC family
  ...

dt-bindings: can: rcar_can: document r8a774[35] can support

2018-01-26T09:47:17+00:00

Document "renesas,can-r8a7743" and "renesas,can-r8a7745" compatible
strings. Since the fallback compatible string ("renesas,rcar-gen2-can")
activates the right code in the driver, no driver change is needed.

Signed-off-by: Fabrizio Castro 
Reviewed-by: Biju Das 
Signed-off-by: Marc Kleine-Budde

dt-bindings: can: m_can: Document new can transceiver binding

2018-01-16T14:11:32+00:00

Add information regarding can-transceiver binding. This is especially
important for MCAN since the IP allows CAN FD mode to run significantly
faster than what most transceivers are capable of.

Signed-off-by: Franklin S Cooper Jr 
Signed-off-by: Sekhar Nori 
Acked-by: Rob Herring 
Signed-off-by: Faiz Abbas 
Signed-off-by: Marc Kleine-Budde

dt-bindings: can: can-transceiver: Document new binding

2018-01-16T14:11:31+00:00

Add documentation to describe usage of the new can-transceiver binding.
This new binding is applicable for any CAN device therefore it exists as
its own document.

Signed-off-by: Franklin S Cooper Jr 
Signed-off-by: Sekhar Nori 
Acked-by: Rob Herring 
Signed-off-by: Faiz Abbas 
Signed-off-by: Marc Kleine-Budde

net: ethernet: Add DT bindings for the Gemini ethernet

2018-01-15T19:38:55+00:00

This adds the device tree bindings for the Gemini ethernet
controller. It is pretty straight-forward, using standard
bindings and modelling the two child ports as child devices
under the parent ethernet controller device.

Cc: devicetree@vger.kernel.org
Cc: Tobias Waldvogel 
Cc: Michał Mirosław 
Reviewed-by: Rob Herring 
Signed-off-by: Linus Walleij 
Signed-off-by: David S. Miller

dt-bindings: net: Add DT bindings for Socionext Netsec

2018-01-10T19:50:29+00:00

This patch adds documentation for Device-Tree bindings for the
Socionext NetSec Controller driver.

Reviewed-by: Rob Herring 
Signed-off-by: Jassi Brar 
Signed-off-by: Ard Biesheuvel 
Signed-off-by: David S. Miller

dt-bindings: net: add DT bindings for Socionext UniPhier AVE

2017-12-28T17:10:39+00:00

DT bindings for the AVE ethernet controller found on Socionext's
UniPhier platforms.

Signed-off-by: Kunihiko Hayashi 
Signed-off-by: Jassi Brar 
Acked-by: Rob Herring 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller