Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ARM DT updates from Olof Johansson:
 "As always, this tends to be one of our bigger branches.  There are
  lots of updates this release, but not that many jumps out as something
  that needs more detailed coverage.  Some of the highlights are:

   - DTs for the new Annapurna Labs Alpine platform

   - more graphics DT pieces falling into place on Exynos, bridges,
     clocks.

   - plenty of DT updates for Qualcomm platforms for various IP blocks

   - some churn on Tegra due to switch-over to tool-generated pinctrl
     data

   - misc fixes and updates for Atmel at91 platforms

   - various DT updates to add IP block support on Broadcom's Cygnus
     platforms

   - more updates for Renesas platforms as DT support is added for
     various IP blocks (IPMMU, display, audio, etc)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits)
  ARM: dts: alpine: add internal pci
  Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135."
  ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB
  ARM: dts: qcom: Add idle state device nodes for 8064
  ARM: dts: qcom: Add idle states device nodes for 8084
  ARM: dts: qcom: Add idle states device nodes for 8974/8074
  ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs
  ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs
  ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs
  devicetree: bindings: Document qcom,idle-states
  devicetree: bindings: Update qcom,saw2 node bindings
  dt-bindings: Add #defines for MSM8916 clocks and resets
  arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree
  arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes
  arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes
  arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974
  arm: dts: qcom: Add LCC nodes
  arm: dts: qcom: Add TCSR support for MSM8960
  arm: dts: qcom: Add TCSR support for MSM8660
  arm: dts: qcom: Add TCSR support for IPQ8064
  ...

Pull devicetree changes from Grant Likely:
 "Here are the devicetree changes queued up for v4.1.  Nothing really
  exciting here.  Rob has another few commits for big-endian attached
  UARTs, but those will be sent in a separate merge request since they
  haven't been as thoroughly tested as this batch.

  Here are the highlights:

   - lots of unittest cleanup from Frank Rowand

   - bugfixes and updates to the of_graph code

   - tighten up of_get_mac_address() code

   - documentation updates"

* tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux:
  of/unittest: Fix of_platform_depopulate test case
  of/unittest: early return from test skips tests
  of/unittest: breadcrumbs to reduce pain of future maintainers
  of/unittest: reduce checkpatch noise - line after declarations
  of/unittest: typo in error string
  of/unittest: add const where needed
  of_net: factor out repetitive code from of_get_mac_address()
  drivers/of: Add empty ranges quirk for PA-Semi
  of: Allow selection of OF_DYNAMIC and OF_OVERLAY if OF_UNITTEST
  of: Empty node & property flag accessors when !OF
  of: Explicitly include linux/types.h in of_graph.h
  dt-bindings: brcm: rationalize Broadcom documentation naming
  of/unittest: replace 'selftest' with 'unittest'
  Documentation: rename of_selftest.txt to of_unittest.txt
  Documentation: update the of_selftest.txt
  dt: OF_UNITTEST make dependency broken
  MAINTAINERS: Pantelis Antoniou device tree overlay maintainer
  of: Add of_graph_get_port_by_id function
  of: Add for_each_endpoint_of_node helper macro
  of: Decrement refcount of previous endpoint in of_graph_get_next_endpoint

The Synopsys stmmac fifo sizes are configurable, and need to be known
in order to configure certain controller features. This patch adds
tx-fifo-depth and rx-fifo-depth properties to the stmmac document
file.

Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Samuel Ortiz says:

====================
NFC: 4.1 pull request

This is the NFC pull request for 4.1.

This is a shorter one than usual, as the Intel Field Peak NFC
driver could not make it in time.

We have:

- A new driver for NXP NCI based chipsets, like e.g. the NPC100 or
  the PN7150. It currently only supports an i2c physical layer, but
  could easily be extended to work on top of e.g. SPI.
  This driver also includes support for user space triggered firmware
  updates.

- A few minor st21nfc[ab] fixes, cleanups, and comments improvements.

- A pn533 error return fix.

- A few NFC related logs formatting cleanups.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The DWMAC block on certain SoCs (such as IMG Pistachio) have a second
clock which must be enabled in order to access the peripheral's
register interface, so add support for requesting and enabling an
optional "pclk".

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/ethernet/mellanox/mlx4/cmd.c
	net/core/fib_rules.c
	net/ipv4/fib_frontend.c

The fib_rules.c and fib_frontend.c conflicts were locking adjustments
in 'net' overlapping addition and removal of code in 'net-next'.

The mlx4 conflict was a bug fix in 'net' happening in the same
place a constant was being replaced with a more suitable macro.

Signed-off-by: David S. Miller <davem@davemloft.net>

According to description in 'include/net/dsa.h', in cascade switches
configurations where there are more than one interconnected devices,
'rtable' array in 'dsa_chip_data' structure is used to indicate which
port on this switch should be used to send packets to that are destined
for corresponding switch.

However, dsa_of_setup_routing_table() fills 'rtable' with port numbers
of the _target_ switch, but not current one.

This commit removes redundant devicetree parsing and adds needed port
number as a function argument. So dsa_of_setup_routing_table() now just
looks for target switch number by parsing parent of 'link' device node.

To remove possible misunderstandings with the way of determining target
switch number, a corresponding comment was added to the source code and
to the DSA device tree bindings documentation file.

This was tested on a custom board with two Marvell 88E6095 switches with
following corresponding routing tables: { -1, 10 } and { 8, -1 }.

Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patchset attempts to standardize the naming of dt-bindings
documents based on the Broadcom vendor prefix of brcm.

Although there are no guidelines currently present for how to name
the dt-bindings document the "vendor,binding.txt" style is in use by
some of the other vendors.

Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Rob Herring <robh@kernel.org>