Pull networking updates from Jakub Kicinski:
 "One of the 'small improvements all over the place' releases for us.

  It's hard to draw any direct comparisons because summer vacations
  disrupted our patch processing (and presumably - generation) quite a
  bit.

  Quick and dirty count suggests we (Paolo and I) merged a very similar
  number of net (632) and net-next (648) patches. This is not telling
  the full story either because 1/3 to 1/2 of the net-next patches also
  *seem* like AI-driven low priority fixes, cleanups and clarifications.

  We are completely overwhelmed, of course. The glimmer of hope is that
  we secured sufficient LLM budget and access (thank you Meta!) to run
  reviews with multiple frontier models on each patch. This eliminates
  some hallucinations. That said, in terms of review, the LLMs can only
  do so much.

  The sad truth is that our APIs (especially for rare events like PCIe
  errors, timeouts etc) have always been racy, and now LLMs don't let us
  ignore that. I expect our direction for the next release will be to
  tweak the reviews a little bit more, but start shifting focus to
  letting the LLMs take care of the busy work - managing patchwork,
  automating common process complaints, editing commit messages, and
  maybe applying patches which already got "reviewed-by" tags from
  people we trust...

  Core & protocols:

   - A few steps lowering rtnl_lock dependence:
      - per-netns netdev unregistration for select SW drivers (e.g.
        veth, ipvlan, tunnels)
      - rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
      - prepare software drivers and TC qdiscs for rtnl_lock-less GET

   - Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)

   - Support buffers larger than PAGE_SIZE in devmem zero-copy API

   - Improve MPTCP handling of extreme memory pressure handling, when
     out-of-order queue had to be pruned

   - Report the per-group user count via RTM_GETMULTICAST

   - Expose the route deletion reason in RTM_DELROUTE

   - Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
     useful handling of LSM denials when receiving SCM_RIGHTS messages:
     instead of truncating the message at the first blocked fd, keep
     every fd slot and store the LSM errno in the blocked slot

   - IPv6 Segment Routing - support looking up the post-encap SID
     (address) in a different/specified routing table

   - Support PRP RedBox (interlink) creation

   - Support per-nexthop UDP dst port in VXLAN

   - Continue converting getsockopt callbacks in a number of protocols
     to iov_iter

  Ethernet:

   - Merge initial CXL support for AMD/Solarflare NICs (shared branch
     with the CXL tree)

   - New drivers:
      - ADIN1140 10BASE-T1S MACPHY
      - Initial skeleton of Intel iXD and ZTE Dinghai drivers

   - High-speed NICs:
      - AMD/Pensando:
         - support firmware flashing
      - Cisco (enic):
         - SR-IOV V2 admin channel and MBOX protocol
      - Huawei (hns3):
         - support for ethtool pfc_prevention_tout
      - nVidia/Mellanox:
         - support sharing bandwidth control across interfaces
           of the same device
      - Marvell (octeontx2-pf):
         - link RQ page pools to netdev for Netlink stats
      - Google vNIC:
         - XDP metadata support for DQ RDA
      - Microsoft vNIC:
         - support forcing full-page RX buffers

   - Other NICs:
      - Synopsys IP:
         - eic7700: support for eth1
      - Microchip (lan743x):
         - support for RMII interface
      - Wangxun:
         - support for ethtool -G and -C for VFs
         - add Tx timeout and PCIe error handling
      - Intel (igb/igc):
         - RSS key get/set support
         - support for forcing link speed without auto-negotiation

   - Switches:
      - NXP (dpaa2):
         - support bonding/LAG offload
      - Mediatek:
         - mt7530: EN7528 support
         - initial support for MT7628
      - Micrel (ksz8/9):
         - refactoring work to move towards library model
         - PTP support for KSZ8463
      - nVidia/Mellanox:
         - support rtnl-lock-less ethtool callbacks
      - Realtek:
         - rtl8366rb: use generic RTL83xx code
         - support SGMII and HSGMII for RTL8367S

   - PHYs:
      - Airoha:
         - EcoNet EN7528 PHY support
      - DAPU Telecom
         - DAPU Telecom DAP8211R(I) Gigabit PHY support
      - Realtek:
         - support RTL8261C_CG
         - support RTL8261D

  Wireless:

   - nl80211: per-link statistics support for multi-link operation

   - mac80211: AQL/airtime-fairness support for multicast

   - Merge Peripheral Authentication Service (PAS) / TEE support for
     ath12k (shared branch with the firmware/qcom tree)

   - New drivers:
      - mm81x for Morse Micro Long-Range S1G devices
      - nxpwifi for NXP devices (mostly forked off from mwifiex)

   - Driver changes:
      - Broadcom (brcmfmac):
         - DPP support, some Cypress part update
      - MediaTek (mt76):
         - mt7928 support
         - mt7925 NAN support
         - mt7996 AP powersave improvements
      - Qualcomm (ath12k):
         - much kernel infrastructure integration work
         - AHB platform MultiPD support
      - Realtek (rt89):
         - LED support
         - RTL8922DE support
         - dual-BT coex for RTL8922D
      - Intel:
         - new FW version support

  Bluetooth:

   - HCI: add support for Shorter Connection Interval (SCI) feature

   - af_bluetooth: add minimal context analysis annotations

   - Driver changes:
      - Intel:
         - add Bluetooth SAR revision 2 support
         - add vendor_reset PCI sysfs for PLDR
      - Mediatek:
         - add USB IDs for MT7902 and MT7922 devices
      - Realtek:
         - add USB IDs for 8761CU and 8852BE devices
      - NXP:
         - add M.2 Bluetooth device support using pwrseq

  Misc:

   - DPLL support for manual/numerical oscillator control (NCO)
     (implement in zl3073x)

   - MCTP support for MCTP over USB v1.1 (DMTF DSP0283)

   - Power-over-Ethernet: support Realtek PSE controllers

   - Remove the IBM EHEA driver

   - Remove tulip/xircom_cb driver"

* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
  net/mlx5e: do not HW-GRO coalesce small frames
  net: openvswitch: fix nf_connlabels leak in ovs_ct_init
  net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
  net: openvswitch: fix flow mask use-after-free on flow deletion
  sctp: stop processing a packet once its association is deleted
  dpll: zl3073x: add PTP clock support
  dpll: zl3073x: add channel ToD, phase step and TIE operations
  dpll: zl3073x: scale poll interval proportionally to timeout
  ptp: vmclock: prevent read-only mappings from becoming writable
  ipv4: reject undersized MTUs in ip_do_fragment()
  bonding: initialize err for empty target lists
  net: dsa: initial support for MT7628 embedded switch
  net: dsa: initial MT7628 tagging driver
  net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
  dt-bindings: net: dsa: add MT7628 ESW
  net: pse-pd: realtek-pse-mcu: add UART transport
  net: pse-pd: realtek-pse-mcu: add I2C transport
  net: pse-pd: add Realtek PSE MCU core
  dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
  vsock: use sock_error() to consume sk_err after a failed connect
  ...

Pull devicetree updates from Rob Herring:

 - Add a DT maintainer profile document

 - Various dt-check-style improvements

 - Add a devres managed reserved memory region init function

 - Print node name on any skipped reserved memory regions

 - Correctly handle optional argument in
   of_parse_phandle_with_args_map()

 - Convert ti,keystone-reset, ti,da850-vpif, TI L4 interconnect, TI
   SmartReflex, microchip,pic32mzda-dmt, microchip,pic32mzda-wdt, TI
   DA8XX MSTPRI bus, and Xen VM bindings to DT schema format

 - Add bindings for StarFive JHB100 plic, Allwinner A733 NMI controller,
   MediaTek MT8173 GPU, QCom Shikra, Eliza, and Maili cpu-bwmon, and
   QCom Shikra SCM firmware

 - A couple of syntax fixes found using PoC Rust implementation of
   dtschema tools

 - Clean-ups for typos, brackets, incorrect "::" usages, and
   white-space style

* tag 'devicetree-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits)
  dt-bindings: interconnect: qcom-bwmon: Add Maili cpu-bwmon compatible
  dtc: dt-check-style: Simplify setting depth of DtsLine
  dtc: dt-check-style: Add missing /dts-v1/ to few test cases
  dt-bindings: power: reset: ti,keystone-reset: Convert to DT schema
  media: dt-bindings: ti,da850-vpif: Convert to dt-schema
  dt-bindings: devfreq: samsung,exynos-ppmu: Use standard regex syntax
  dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop invalid JSON pointer
  dt-bindings: arm: omap: Convert L4 interconnect to DT schema
  dt-bindings: power: Convert TI SmartReflex to DT schema
  of: reserved_mem: Introduce devres-managed initialization function
  dt-bindings: interrupt-controller: Add StarFive JHB100 plic
  dt-bindings: irq: sun7i-nmi: Document the Allwinner A733 NMI controller
  dt-bindings: Correct white-space style
  dt-bindings: fix typos and brackets
  docs: dt: submitting-patches: Mention expectation about dt-check-style
  docs: dt: maintainer: Add Devicetree and OF maintainer profile document
  docs: dt: writing-schema: Extend expectations about example part of binding
  dt-bindings: gpu: powervr-rogue: Add MediaTek MT8173 GPU
  of: base: Handle optional argument in of_parse_phandle_with_args_map()
  dt-bindings: update Sudeep Holla's email address
  ...

Marc Kleine-Budde says:

====================
pull-request: can-next 2026-08-18

The first patch is by Sean Nyekjaer, targets the tcan4x5x driver and
puts the device into sleep mode before removing the driver.

Pavel Pisa's patch fixes the colors in the documentation of the TX
buffer FSM of CTU CAN FD driver.

2 patches by Cunhao Lu add support for the rockchip 3588 SoC to the
rockchip CAN-FD driver.

Kuniyuki Iwashima contributes per-netns device unregistration for the
vxcan driver.

Eduard Bostina converts the TI HECC DT bindings doc to DT schema.

Harini T contributes 2 patches to the xilinx_can driver to document
phys and update maintainer.

A patch by bui duc phuc converts the m_can driver to use
of_property_present() for wakeup-source.

Fanbo He's patch fixes a typo in the gs_usb driver.

The last patch is by Markus Schneider-Pargmann and removed not needed
driver_data from the m_can PCI driver.

* tag 'linux-can-next-for-7.3-20260818' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
  can: m_can: pci: Remove driver_data
  drivers: gs_usb: gs_usb_probe(): fix typo in error message
  can: m_can: Use of_property_present() for wakeup-source
  dt-bindings: can: xilinx_can: Document phys property
  dt-bindings: net: can: Convert TI HECC to DT schema
  MAINTAINERS: Replace maintainer for Xilinx CAN driver
  can: vxcan: support per-netns device unregistration.
  docs: ctucanfd: fix swapped colors in legend for TX buffer FSM of CTU CAN FD
  can: rockchip: add RK3588 CAN support
  dt-bindings: can: rockchip: add rk3588 CAN-FD compatible
  can: tcan4x5x: put tcan into sleep when removing driver
====================

Link: https://patch.msgid.link/20260817233420.2068204-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add device tree bindings for the MediaTek MT7628 embedded Ethernet
Switch.

The Switch provides 5 external user ports and 1 internal CPU port, with
integrated 10/100 PHYs and fixed port to PHY mapping.

The CPU port is internally connected and uses port index 6.

Signed-off-by: Joris Vaisvila <joey@tinyisr.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260813190241.789323-2-joey@tinyisr.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add a binding for the microcontroller (MCU) that fronts the PSE silicon
on a range of managed Realtek-based switches. The host talks only to the
MCU, over I2C/SMBus or UART, using a fixed message-based protocol; the
PSE chips behind it never appear on the bus.

The device is the MCU together with its Realtek firmware: the firmware
and its host protocol are what the binding describes, not the
general-purpose microcontroller they run on. The PSE silicon behind the
MCU (Realtek or Broadcom) is reported by the MCU and detected at runtime,
so it is not described here - hence the 'realtek' vendor prefix.

Two protocol generations exist, both Realtek's, selected by the
compatible: gen1 on older boards (fronting Broadcom PSE silicon) and gen2,
the altered protocol used with Realtek's own PSE silicon. On an I2C
attachment the framing the MCU firmware expects is part of the compatible
as well - '-smbus' or raw '-i2c'; a UART attachment carries no framing
suffix, as the transport is given by the parent serial node.

Each board additionally carries a device-specific compatible that falls
back to one of the protocol compatibles above. Drivers bind on the
protocol compatible; the device-specific string identifies the board and
reserves a place for a future per-board quirk without having to retrofit
device trees already in the field.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260813222036.873930-2-jelonek.jonas@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Matthew Gerlach is no longer at Altera, so remove his entry as a
maintainer for the SoCFPGA DWMAC ethernet glue layer and the GMII/SGMII
dt-bindings files.

Maxime Chevallier has volunteered to maintain the dt-bindings YAML files
as well.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260813005536.2068392-1-dinguyen@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The Xilinx CAN and CANFD controllers can be connected to an external
CAN transceiver on the board. That connection is described with the
standard "phys" property on the controller node, pointing to a CAN
transceiver PHY node which models the transceiver and its control
lines (for example the standby/enable signals).

Describe the optional "phys" property (a single transceiver PHY) so
the on-board CAN transceiver can be described in the device tree.

Signed-off-by: Harini T <harini.t@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260717021415.2234865-3-harini.t@amd.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Replace Appana Durga Kedareswara rao with Harini T as the maintainer
of the Xilinx CAN driver. Kedar is no longer maintaining it.

Signed-off-by: Harini T <harini.t@amd.com>
Acked-by: Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260717021415.2234865-2-harini.t@amd.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Convert the Texas Instruments High End CAN Controller (HECC) bindings
to DT schema.

Signed-off-by: Eduard Bostina <egbostina@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260719140127.3558941-1-egbostina@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

RK3588 integrates a Rockchip CAN-FD controller variant that is not
fully compatible with RK3568v2. The RX FIFO count register field is
encoded in bits 7:5 on RK3588, while RK3568v2 uses bits 6:4.

Add a dedicated rockchip,rk3588-canfd compatible to describe this
variant. Do not use rockchip,rk3568v2-canfd as a fallback, because that
would describe a register layout that does not match the hardware.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Cunhao Lu <1579567540@qq.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/tencent_AE1A1199FC8C9ADC680C6458134A46B40309@qq.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>