linux.git/Documentation/devicetree/bindings/mtd, branch v5.5 Linux kernel source tree dt-bindings: Change maintainer address 2019-12-13T00:38:10+00:00 Maxime Ripard maxime@cerno.tech 2019-12-09T09:32:48+00:00 5c7404bb30bc5877e578336c58998a999c410622 While my email address has changed for a while, all the schemas I contributed still have the old one unfortunately. Update it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org> 
While my email address has changed for a while, all the schemas I
contributed still have the old one unfortunately. Update it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
Merge tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2019-12-02T19:41:35+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-12-02T19:41:35+00:00 2c97b5ae83dca56718774e7b4bf9640f05d11867 Pull Devicetree updates from Rob Herring: - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot, syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar, Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue, Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404 interconnect, Unisoc/Spreadtrum SoCs and UART - Convert a bunch of Samsung bindings to DT schema - Convert a bunch of ST stm32 bindings to DT schema - Realtek and Exynos additions to Arm Mali bindings - Fix schema errors in RiscV CPU schema - Various schema fixes from improved meta-schema checks - Improve the handling of 'dma-ranges' and in particular fix DMA mask setup on PCI bridges - Fix a memory leak in add_changeset_property() and DT unit tests. - Several documentation improvements for schema validation - Rework build rules to improve schema validation errors - Color output for dtx_diff * tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits) libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h dt-bindings: arm: Remove leftover axentia.txt of: unittest: fix memory leak in attach_node_and_children of: overlay: add_changeset_property() memory leak dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems dt-bindings: power: Rename back power_domain.txt bindings to fix references dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema dt-bindings: remoteproc: convert stm32-rproc to json-schema dt-bindings: mailbox: convert stm32-ipcc to json-schema dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema dt-bindings: interrupt-controller: Convert stm32-exti to json-schema dt-bindings: crypto: Convert stm32 HASH bindings to json-schema dt-bindings: rng: Convert stm32 RNG bindings to json-schema dt-bindings: pwm: Convert Samsung PWM bindings to json-schema dt-bindings: pwm: Convert PWM bindings to json-schema dt-bindings: serial: Add a new compatible string for SC9863A dt-bindings: serial: Convert sprd-uart to json-schema dt-bindings: arm: Add bindings for Unisoc SC9863A ... 
Pull Devicetree updates from Rob Herring:

 - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
   syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
   Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
   panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
   Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404
   interconnect, Unisoc/Spreadtrum SoCs and UART

 - Convert a bunch of Samsung bindings to DT schema

 - Convert a bunch of ST stm32 bindings to DT schema

 - Realtek and Exynos additions to Arm Mali bindings

 - Fix schema errors in RiscV CPU schema

 - Various schema fixes from improved meta-schema checks

 - Improve the handling of 'dma-ranges' and in particular fix DMA mask
   setup on PCI bridges

 - Fix a memory leak in add_changeset_property() and DT unit tests.

 - Several documentation improvements for schema validation

 - Rework build rules to improve schema validation errors

 - Color output for dtx_diff

* tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits)
  libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
  dt-bindings: arm: Remove leftover axentia.txt
  of: unittest: fix memory leak in attach_node_and_children
  of: overlay: add_changeset_property() memory leak
  dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes
  dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems
  dt-bindings: power: Rename back power_domain.txt bindings to fix references
  dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml
  dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema
  dt-bindings: remoteproc: convert stm32-rproc to json-schema
  dt-bindings: mailbox: convert stm32-ipcc to json-schema
  dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
  dt-bindings: interrupt-controller: Convert stm32-exti to json-schema
  dt-bindings: crypto: Convert stm32 HASH bindings to json-schema
  dt-bindings: rng: Convert stm32 RNG bindings to json-schema
  dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
  dt-bindings: pwm: Convert PWM bindings to json-schema
  dt-bindings: serial: Add a new compatible string for SC9863A
  dt-bindings: serial: Convert sprd-uart to json-schema
  dt-bindings: arm: Add bindings for Unisoc SC9863A
  ...
dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema 2019-11-21T19:56:18+00:00 Benjamin Gaignard benjamin.gaignard@st.com 2019-11-21T13:06:15+00:00 1e25c5f5333a9ca482312c8a4c33e251887d2d82 Convert the STM32 fmc2-nand binding to DT schema format using json-schema Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> CC: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Rob Herring <robh@kernel.org> 
Convert the STM32 fmc2-nand binding to DT schema format using json-schema

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
CC: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Merge tag 'nand/for-5.5' into mtd/next 2019-11-17T17:34:25+00:00 Miquel Raynal miquel.raynal@bootlin.com 2019-11-17T17:34:25+00:00 589e1b6c47ce72fcae103c2e45d899610c92c11e Raw NAND core * Useless extra checks dropped. * Updated the detection of the bad block markers position Raw NAND controller drivers: * Cadence : New driver * Brcmnand: Support for flash-dma v0 + fixes * Denali : Support for the legacy controller/chip DT representation dropped * Superfluous dev_err() calls removed 
Raw NAND core
* Useless extra checks dropped.
* Updated the detection of the bad block markers position

Raw NAND controller drivers:
* Cadence : New driver
* Brcmnand: Support for flash-dma v0 + fixes
* Denali : Support for the legacy controller/chip DT representation
           dropped
* Superfluous dev_err() calls removed
mtd: add DT bindings for the Intel IXP4xx Flash 2019-10-29T13:24:51+00:00 Linus Walleij linus.walleij@linaro.org 2019-10-20T23:00:41+00:00 8b3cc926223be73bb2ab5f9465f157fc27e06eca This adds device tree bindings for the Intel IXP4xx flash controller, a simple physmap which however need a specific big-endian or mixed-endian access pattern to the memory. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> 
This adds device tree bindings for the Intel IXP4xx
flash controller, a simple physmap which however need a
specific big-endian or mixed-endian access pattern to the
memory.

Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
dt-bindings: mtd: Add Cadence NAND controller driver 2019-10-04T16:02:24+00:00 Piotr Sroka piotrs@cadence.com 2019-09-26T08:13:21+00:00 5121b4219972c16e9ac92545a6743af2e99d4abc Document the bindings used by Cadence NAND controller driver Signed-off-by: Piotr Sroka <piotrs@cadence.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> 
Document the bindings used by Cadence NAND controller driver

Signed-off-by: Piotr Sroka <piotrs@cadence.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
dt-bindings: mtd: Document Macronix raw NAND controller bindings 2019-08-26T07:25:41+00:00 Mason Yang masonccyang@mxic.com.tw 2019-08-19T07:19:09+00:00 220280708a2349bc8dd61ab029483d65440a5aa0 Document the bindings used by the Macronix raw NAND controller. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> 
Document the bindings used by the Macronix raw NAND controller.

Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
dt-bindings: Ensure child nodes are of type 'object' 2019-07-21T02:27:29+00:00 Rob Herring robh@kernel.org 2019-07-03T20:17:06+00:00 15ffef1ae69e99ebb54326f0220916b1fe619b24 Properties which are child node definitions need to have an explict type. Otherwise, a matching (DT) property can silently match when an error is desired. Fix this up tree-wide. Once this is fixed, the meta-schema will enforce this on any child node definitions. Cc: Chen-Yu Tsai <wens@csie.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-spi@vger.kernel.org Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org> 
Properties which are child node definitions need to have an explict
type. Otherwise, a matching (DT) property can silently match when an
error is desired. Fix this up tree-wide. Once this is fixed, the
meta-schema will enforce this on any child node definitions.

Cc: Chen-Yu Tsai <wens@csie.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: linux-mtd@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-spi@vger.kernel.org
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Merge tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux 2019-07-13T22:42:44+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-07-13T22:42:44+00:00 3f06962273e73c5f7a651726b191d531cadef788 Pull MTD updates from Miquel Raynal: "This contains the following changes for MTD: MTD core changes: - New Hyperbus framework - New _is_locked (concat) implementation - Various cleanups NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: - fix BCH ECC layout for large page NAND parts - fallback to detected ecc-strength, ecc-step-size - when oops in progress use pio and interrupt polling - code refactor code to introduce helper functions - add support for v7.3 controller - FSMC: - use nand_op_trace for operation tracing - GPMI: - move all driver code into single file - various cleanups (including dmaengine changes) - use runtime PM to manage clocks - implement exec_op - MTK: - correct low level time calculation of r/w cycle - improve data sampling timing for read cycle - add validity check for CE# pin setting - fix wrongly assigned OOB buffer pointer issue - re-license MTK NAND driver as Dual MIT/GPL - STM32: - manage the get_irq error case - increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control" * tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits) mtd: concat: implement _is_locked mtd operation mtd: concat: refactor concat_lock/concat_unlock mtd: abi: do not use C++ style comments in uapi header mtd: afs: remove unneeded NULL check mtd: rawnand: stm32_fmc2: increase DMA completion timeouts mtd: rawnand: Use kzalloc() instead of kmalloc() and memset() mtd: hyperbus: Add driver for TI's HyperBus memory controller mtd: spinand: read returns badly if the last page has bitflips mtd: spinand: Add initial support for Paragon PN26G0xA mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL mtd: rawnand: gpmi: remove double assignment to block_size dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support mtd: rawnand: brcmnand: Add support for v7.3 controller mtd: rawnand: brcmnand: Refactored code to introduce helper functions mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling mtd: Add flag to indicate panic_write mtd: rawnand: Add Macronix NAND read retry support mtd: onenand: Avoid fall-through warnings mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG mtd: spinand: Add support for two-byte device IDs ... 
Pull MTD updates from Miquel Raynal:
 "This contains the following changes for MTD:

  MTD core changes:
   - New Hyperbus framework
   - New _is_locked (concat) implementation
   - Various cleanups

  NAND core changes:
   - use longest matching pattern in ->exec_op() default parser
   - export NAND operation tracer
   - add flag to indicate panic_write in MTD
   - use kzalloc() instead of kmalloc() and memset()

  Raw NAND controller drivers changes:
   - brcmnand:
       - fix BCH ECC layout for large page NAND parts
       - fallback to detected ecc-strength, ecc-step-size
       - when oops in progress use pio and interrupt polling
       - code refactor code to introduce helper functions
       - add support for v7.3 controller
   - FSMC:
       - use nand_op_trace for operation tracing
   - GPMI:
       - move all driver code into single file
       - various cleanups (including dmaengine changes)
       - use runtime PM to manage clocks
       - implement exec_op
   - MTK:
       - correct low level time calculation of r/w cycle
       - improve data sampling timing for read cycle
       - add validity check for CE# pin setting
       - fix wrongly assigned OOB buffer pointer issue
       - re-license MTK NAND driver as Dual MIT/GPL
   - STM32:
       - manage the get_irq error case
       - increase DMA completion timeouts

  Raw NAND chips drivers changes:
   - Macronix: add read-retry support

  Onenand driver changes:
   - add support for 8Gb datasize chips
   - avoid fall-through warnings

  SPI-NAND changes:
   - define macros for page-read ops with three-byte addresses
   - add support for two-byte device IDs and then for GigaDevice
     GD5F1GQ4UFxxG
   - add initial support for Paragon PN26G0xA
   - handle the case where the last page read has bitflips

  SPI-NOR core changes:
   - add support for the mt25ql02g and w25q16jv flashes
   - print error in case of jedec read id fails
   - is25lp256: add post BFPT fix to correct the addr_width

  SPI NOR controller drivers changes:
   - intel-spi: Add support for Intel Elkhart Lake SPI serial flash
   - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c
   - cadence-quadspi: add reset control"

* tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits)
  mtd: concat: implement _is_locked mtd operation
  mtd: concat: refactor concat_lock/concat_unlock
  mtd: abi: do not use C++ style comments in uapi header
  mtd: afs: remove unneeded NULL check
  mtd: rawnand: stm32_fmc2: increase DMA completion timeouts
  mtd: rawnand: Use kzalloc() instead of kmalloc() and memset()
  mtd: hyperbus: Add driver for TI's HyperBus memory controller
  mtd: spinand: read returns badly if the last page has bitflips
  mtd: spinand: Add initial support for Paragon PN26G0xA
  mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL
  mtd: rawnand: gpmi: remove double assignment to block_size
  dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support
  mtd: rawnand: brcmnand: Add support for v7.3 controller
  mtd: rawnand: brcmnand: Refactored code to introduce helper functions
  mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling
  mtd: Add flag to indicate panic_write
  mtd: rawnand: Add Macronix NAND read retry support
  mtd: onenand: Avoid fall-through warnings
  mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
  mtd: spinand: Add support for two-byte device IDs
  ...
Merge tag 'spi-nor/for-5.3-v2' of gitolite.kernel.org:pub/scm/linux/kernel/git/mtd/linux into mtd/next 2019-07-07T20:53:15+00:00 Miquel Raynal miquel.raynal@bootlin.com 2019-07-07T20:53:15+00:00 46ce10df799fb0647a9c0e3f793e66463a8d6773 SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control 
SPI-NOR core changes:
- add support for the mt25ql02g and w25q16jv flashes
- print error in case of jedec read id fails
- is25lp256: add post BFPT fix to correct the addr_width

SPI NOR controller drivers changes:
- intel-spi: Add support for Intel Elkhart Lake SPI serial flash
- smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c
- cadence-quadspi: add reset control