linux.git/Documentation/devicetree/bindings/mtd, branch v4.11

dt-bindings: mtd: add a common label property to all mtd devices

2017-02-10T18:16:49+00:00

This can be used to easily identify a specific chip on a system with
multiple chips.

Signed-off-by: Cédric Le Goater 
Acked-by: Boris Brezillon 
Acked-by: Rob Herring 
Reviewed-by: Marek Vasut 
Signed-off-by: Brian Norris

Merge tag 'spi-nor/for-4.11-v2' of git://github.com/spi-nor/linux

2017-02-10T18:05:51+00:00

From Cyrille:

"""
This pull request contains the following notable changes:
- add support to the 4-byte address instruction set.
- add support to new memory parts.
- add support to S3AN memories.
- add support to the Intel SPI controller.
- add support to the Aspeed AST2400 and AST2550 controllers.
- fix max SPI transfer and message sizes in m25p80_read().
- fix the Candence QSPI driver.
- fix the Freescale QSPI driver.
"""

Documentation: mtk-quadspi: update DT bindings

2017-02-10T13:22:00+00:00

Add "mediatek,mt2701-nor" for nor flash node's compatible.

Signed-off-by: Guochun Mao 
Acked-by: John Crispin 
Acked-by: Rob Herring 
Signed-off-by: Cyrille Pitchen

mtd: spi-nor: add dt support for Everspin MRAMs

2017-02-10T13:21:59+00:00

The MR25 family doesn't support JEDEC, so they need explicit mentioning
in the list of supported spi IDs. This makes it possible to add these
using for example:

	compatible = "everspin,mr25h40";

There was already an entry for mr25h256. Move that one out of the "keep
for compatibility" section and put in a new group for Everspin MRAMs.

Signed-off-by: Uwe Kleine-König 
Acked-by: Rob Herring 
Signed-off-by: Cyrille Pitchen

mtd: spi-nor: bindings for the Aspeed memory controllers

2017-02-10T12:54:54+00:00

Signed-off-by: Cédric Le Goater 
Acked-by: Rob Herring 
Signed-off-by: Cyrille Pitchen

mtd: add DT bindings for the Cortina Systems Gemini Flash

2017-02-08T19:36:10+00:00

This adds device tree bindings for the Cortina systems Gemini
flash controller, a simple physmap which however need a few
syscon bits to be poked to operate properly.

Cc: Janos Laube 
Cc: Paulius Zaleckas 
Cc: Hans Ulli Kroll 
Cc: Florian Fainelli 
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij 
Reviewed-by: Marek Vasut 
Acked-by: Rob Herring 
Signed-off-by: Brian Norris

mtd: nand: tango: Update DT binding description

2017-01-03T08:51:13+00:00

Visually separate register ranges (address/size pairs) in reg prop.
Change DMA channel name, for consistency with other drivers.

Signed-off-by: Marc Gonzalez 
Signed-off-by: Boris Brezillon

mtd: nand: add tango NFC dt bindings doc

2016-11-07T13:48:39+00:00

Add the tango NAND Flash Controller dt bindings documentation.

Signed-off-by: Marc Gonzalez 
Acked-by: Rob Herring 
Signed-off-by: Boris Brezillon

dt-bindings: mtd: add DT binding for s3c2410 flash controller

2016-11-07T13:48:36+00:00

Adds the device tree bindings description for Samsung S3C2410 and
compatible NAND flash controller.

Acked-by: Rob Herring 
Acked-by: Krzysztof Kozlowski 
Signed-off-by: Sergio Prado 
Signed-off-by: Boris Brezillon

mtd: nand: Add OX820 NAND Support

2016-10-22T12:24:21+00:00

Add NAND driver to support the Oxford Semiconductor OX820 NAND Controller.
This is a simple memory mapped NAND controller with single chip select and
software ECC.

Acked-by: Rob Herring 
Signed-off-by: Neil Armstrong 
Signed-off-by: Boris Brezillon