linux.git/Documentation/devicetree/bindings/misc, branch v3.13 Linux kernel source tree ARM: sunxi: Initial support for Allwinner's Security ID fuses 2013-09-26T20:47:36+00:00 Oliver Schinagl oliver@schinagl.nl 2013-09-03T10:33:27+00:00 9fd379e929a2808208b1d2d4cd9697067e83a242 Allwinner has electric fuses (efuse) on their line of chips. This driver reads those fuses, seeds the kernel entropy and exports them as a sysfs node. These fuses are most likely to be programmed at the factory, encoding things like Chip ID, some sort of serial number, etc. and appear to be reasonably unique. While in theory, these should be writeable by the user, it will probably be inconvenient to do so. Allwinner recommends that a certain input pin, labeled 'efuse_vddq', be connected to GND. To write these fuses however, a 2.5 V programming voltage needs to be applied to this pin. Even so, they can still be used to generate a board-unique mac from, board unique RSA key and seed the kernel RNG. On sun7i additional storage is available, this is initially used for an UEFI BOOT key, Secure JTAG key, HDMI-HDCP key and vendor specific keys. Currently supported are the following known chips: Allwinner sun4i (A10) Allwinner sun5i (A10s, A13) Allwinner sun7i (A20) Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Allwinner has electric fuses (efuse) on their line of chips. This driver
reads those fuses, seeds the kernel entropy and exports them as a sysfs
node.

These fuses are most likely to be programmed at the factory, encoding
things like Chip ID, some sort of serial number, etc. and appear to be
reasonably unique.
While in theory, these should be writeable by the user, it will probably
be inconvenient to do so. Allwinner recommends that a certain input pin,
labeled 'efuse_vddq', be connected to GND. To write these fuses however,
a 2.5 V programming voltage needs to be applied to this pin.

Even so, they can still be used to generate a board-unique mac from,
board unique RSA key and seed the kernel RNG.

On sun7i additional storage is available, this is initially used for an
UEFI BOOT key, Secure JTAG key, HDMI-HDCP key and vendor specific keys.

Currently supported are the following known chips:
Allwinner sun4i (A10)
Allwinner sun5i (A10s, A13)
Allwinner sun7i (A20)

Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers: misc: ti_dac7512: add support for DT matching 2013-09-26T16:04:06+00:00 Daniel Mack zonque@gmail.com 2013-09-22T19:51:49+00:00 f91f9258f61f024d34b7c001f989acf8ee39378a Only matching is done via DT, no other details can be passed. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Only matching is done via DT, no other details can be passed.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2013-09-06T20:26:27+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-09-06T20:26:27+00:00 dccfd1e439c11422d7aca0d834b0430d24650e85 Pull ARM SoC DT updates from Olof Johansson: "Device tree and bindings updates for 3.12. General additions of various on-chip and on-board peripherals on various platforms as support gets added. Some of the bigger changes are: - Addition of (new) PCI-e support on Tegra. - More Tegra4 support, including PMC configuration for Dalmore. - Addition of a new board for Exynos4 (trats2) and more bindings for 4x12 IP. - Addition of Allwinner A20 and A31 SoC and board files. - Move of the ST Ericsson device tree files to now use ste-* prefix. - More move of hardware description of shmobile platforms to DT. - Two new board dts files for Freescale MXs" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits) dts: Rename DW APB timer compatible strings dts: Deprecate ALTR as a vendor prefix of: add vendor prefix for Altera Corp. ARM: at91/dt: sam9x5ek: add sound configuration ARM: at91/dt: sam9x5ek: enable SSC ARM: at91/dt: sam9x5ek: add WM8731 codec ARM: at91/dt: sam9x5: add SSC DMA parameters ARM: at91/dt: add at91rm9200 PQFP package version ARM: at91: at91rm9200: set default mmc0 pinctrl-names ARM: at91: at91sam9n12: correct pin number of gpio-key ARM: at91: at91sam9n12: add qt1070 support ARM: at91: at91sam9n12: add pinctrl of TWI ARM: at91: Add PMU support for sama5d3 ARM: at91: at91sam9260: add missing pinctrl-names on mmc ARM: tegra: configure power off for Dalmore ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) ARM: dts: add sdio blocks to bcm28155-ap board ARM: dts: align sdio numbers to HW definition ARM: sun7i: Add Olimex A20-Olinuxino-Micro support ARM: sun7i: Add Allwinner A20 DTSI ... 
Pull ARM SoC DT updates from Olof Johansson:
 "Device tree and bindings updates for 3.12.

  General additions of various on-chip and on-board peripherals on
  various platforms as support gets added.  Some of the bigger changes
  are:

   - Addition of (new) PCI-e support on Tegra.
   - More Tegra4 support, including PMC configuration for Dalmore.
   - Addition of a new board for Exynos4 (trats2) and more bindings for
     4x12 IP.
   - Addition of Allwinner A20 and A31 SoC and board files.
   - Move of the ST Ericsson device tree files to now use ste-* prefix.
   - More move of hardware description of shmobile platforms to DT.
   - Two new board dts files for Freescale MXs"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits)
  dts: Rename DW APB timer compatible strings
  dts: Deprecate ALTR as a vendor prefix
  of: add vendor prefix for Altera Corp.
  ARM: at91/dt: sam9x5ek: add sound configuration
  ARM: at91/dt: sam9x5ek: enable SSC
  ARM: at91/dt: sam9x5ek: add WM8731 codec
  ARM: at91/dt: sam9x5: add SSC DMA parameters
  ARM: at91/dt: add at91rm9200 PQFP package version
  ARM: at91: at91rm9200: set default mmc0 pinctrl-names
  ARM: at91: at91sam9n12: correct pin number of gpio-key
  ARM: at91: at91sam9n12: add qt1070 support
  ARM: at91: at91sam9n12: add pinctrl of TWI
  ARM: at91: Add PMU support for sama5d3
  ARM: at91: at91sam9260: add missing pinctrl-names on mmc
  ARM: tegra: configure power off for Dalmore
  ARM: DT: binding fixup to align with vendor-prefixes.txt (DT)
  ARM: dts: add sdio blocks to bcm28155-ap board
  ARM: dts: align sdio numbers to HW definition
  ARM: sun7i: Add Olimex A20-Olinuxino-Micro support
  ARM: sun7i: Add Allwinner A20 DTSI
  ...
ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) 2013-08-20T17:47:47+00:00 Christian Daudt csd@broadcom.com 2013-07-30T23:27:10+00:00 15e22ddf045ed9796d0d2302e759aa7a37826523 [ this is a follow-up to this discussion: http://archive.arm.linux.org.uk/lurker/message/20130730.230827.a1ceb12a.en.html ] This patchset renames all uses of "bcm," name bindings to "brcm," as they were done prior to knowing that brcm had already been standardized as Broadcom vendor prefix (in Documentation/devicetree/bindings/vendor-prefixes.txt). This will not cause any churn on devices because none of these bindings have made it into production yet. Also rename the the following dt binding docs that had "bcm," in their name for consistency: - bcm,kona-sdhci.txt -> kona-sdhci.txt - bcm,kona-timer.txt -> kona-timer.txt Signed-off-by: Christian Daudt <csd@broadcom.com> Acked-by: Stephen Warren <swarren@nvidia.com> 
[ this is a follow-up to this discussion:
http://archive.arm.linux.org.uk/lurker/message/20130730.230827.a1ceb12a.en.html ]
This patchset renames all uses of "bcm," name bindings to
"brcm," as they were done prior to knowing that brcm had
already been standardized as Broadcom vendor prefix
(in Documentation/devicetree/bindings/vendor-prefixes.txt).
This will not cause any churn on devices because none of
these bindings have made it into production yet.
Also rename the the following dt binding docs that had "bcm,"
in their name for consistency:
 - bcm,kona-sdhci.txt -> kona-sdhci.txt
 - bcm,kona-timer.txt -> kona-timer.txt

Signed-off-by: Christian Daudt <csd@broadcom.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
ASoC: atmel: update atmel SSC with DMA binding 2013-08-06T17:12:25+00:00 Richard Genoud richard.genoud@gmail.com 2013-07-30T10:32:04+00:00 f813175aa54367f455d8bb96f8f5ac2cec924528 As atmel-ssc can be used with DMA, the documentation should be updated. Also, a configuration DMA example is given. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org> 
As atmel-ssc can be used with DMA, the documentation should be updated.
Also, a configuration DMA example is given.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Merge tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2013-05-04T19:33:36+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-05-04T19:33:36+00:00 e3d98847ded1d183111ff7c4d1ef56b161c7f13e Pull ARM platform specific firmware interfaces from Olof Johansson: "Two platforms, bcm and exynos have their own firmware interfaces using the "secure monitor call", this adds support for those. We had originally planned to have a third set of patches in here, which would extend support for the existing generic "psci" call that is used on multiple platforms as well as Xen and KVM guests, but that ended up getting dropped because the patches were not ready in time." * tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: bcm: mark bcm_kona_smc_init as __init ARM: bcm281xx: Add DT support for SMC handler ARM: bcm281xx: Add L2 cache enable code ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up ARM: EXYNOS: Add IO mapping for non-secure SYSRAM. ARM: EXYNOS: Add support for Exynos secure firmware ARM: EXYNOS: Add support for secure monitor calls ARM: Add interface for registering and calling firmware-specific operations 
Pull ARM platform specific firmware interfaces from Olof Johansson:
 "Two platforms, bcm and exynos have their own firmware interfaces using
  the "secure monitor call", this adds support for those.

  We had originally planned to have a third set of patches in here,
  which would extend support for the existing generic "psci" call that
  is used on multiple platforms as well as Xen and KVM guests, but that
  ended up getting dropped because the patches were not ready in time."

* tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: bcm: mark bcm_kona_smc_init as __init
  ARM: bcm281xx: Add DT support for SMC handler
  ARM: bcm281xx: Add L2 cache enable code
  ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up
  ARM: EXYNOS: Add IO mapping for non-secure SYSRAM.
  ARM: EXYNOS: Add support for Exynos secure firmware
  ARM: EXYNOS: Add support for secure monitor calls
  ARM: Add interface for registering and calling firmware-specific operations
misc: generic on-chip SRAM allocation driver 2013-04-30T01:28:13+00:00 Philipp Zabel p.zabel@pengutronix.de 2013-04-29T23:17:12+00:00 4984c6f5e56c3e68922fd979347ba7aff385783b This driver requests and remaps a memory region as configured in the device tree. It serves memory from this region via the genalloc API. It optionally enables the SRAM clock. Other drivers can retrieve the genalloc pool from a phandle pointing to this drivers' device node in the device tree. The allocation granularity is hard-coded to 32 bytes for now, to make the SRAM driver useful for the 6502 remoteproc driver. There is overhead for bigger SRAMs, where only a much coarser allocation granularity is needed: At 32 bytes minimum allocation size, a 256 KiB SRAM needs a 1 KiB bitmap to track allocations. [akpm@linux-foundation.org: fix Kconfig text, make sram_init static] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Michal Simek <monstr@monstr.eu> Cc: Dong Aisheng <dong.aisheng@linaro.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Shijie <shijie8@gmail.com> Cc: Javier Martin <javier.martin@vista-silicon.com> Cc: Matt Porter <mporter@ti.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This driver requests and remaps a memory region as configured in the
device tree.  It serves memory from this region via the genalloc API.  It
optionally enables the SRAM clock.

Other drivers can retrieve the genalloc pool from a phandle pointing to
this drivers' device node in the device tree.

The allocation granularity is hard-coded to 32 bytes for now, to make the
SRAM driver useful for the 6502 remoteproc driver.  There is overhead for
bigger SRAMs, where only a much coarser allocation granularity is needed:
At 32 bytes minimum allocation size, a 256 KiB SRAM needs a 1 KiB bitmap
to track allocations.

[akpm@linux-foundation.org: fix Kconfig text, make sram_init static]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Michal Simek <monstr@monstr.eu>
Cc: Dong Aisheng <dong.aisheng@linaro.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Shijie <shijie8@gmail.com>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Cc: Matt Porter <mporter@ti.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ARM: bcm281xx: Add DT support for SMC handler 2013-04-09T16:21:59+00:00 Christian Daudt csd@broadcom.com 2013-03-13T22:05:37+00:00 7f6c62e2695bcb1547afdeb4ad3bcdf8c610be2c - Adds devicetree binding and documentation for the smc handler Updates from V1: - Created this separate patch for the DT portion - Added SoC compatible to smc binding Signed-off-by: Christian Daudt <csd@broadcom.com> Acked-by: Arnd Bergmann <arnd@arndb.de> 
- Adds devicetree binding and documentation for the smc handler

Updates from V1:
- Created this separate patch for the DT portion
- Added SoC compatible to smc binding

Signed-off-by: Christian Daudt <csd@broadcom.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
ARM: at91: atmel-ssc: add device tree support 2012-11-07T08:23:49+00:00 Bo Shen voice.shen@atmel.com 2012-11-07T03:41:41+00:00 099343c64e1615ae83b0994197027be363ca4899 Add atmel-ssc for device tree support Match "atmel,at91rm9200-ssc" for using pdc for data transfer Match "atmel,at91sam9g45-ssc" for using dma for data transfer Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 
Add atmel-ssc for device tree support

Match "atmel,at91rm9200-ssc" for using pdc for data transfer
Match "atmel,at91sam9g45-ssc" for using dma for data transfer

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc 2012-10-05T18:16:12+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-10-05T18:16:12+00:00 5f3d2f2e1a63679cf1c4a4210f2f1cc2f335bef6 Pull powerpc updates from Benjamin Herrenschmidt: "Some highlights in addition to the usual batch of fixes: - 64TB address space support for 64-bit processes by Aneesh Kumar - Gavin Shan did a major cleanup & re-organization of our EEH support code (IBM fancy PCI error handling & recovery infrastructure) which paves the way for supporting different platform backends, along with some rework of the PCIe code for the PowerNV platform in order to remove home made resource allocations and instead use the generic code (which is possible after some small improvements to it done by Gavin). - Uprobes support by Ananth N Mavinakayanahalli - A pile of embedded updates from Freescale folks, including new SoC and board supports, more KVM stuff including preparing for 64-bit BookE KVM support, ePAPR 1.1 updates, etc..." Fixup trivial conflicts in drivers/scsi/ipr.c * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits) powerpc/iommu: Fix multiple issues with IOMMU pools code powerpc: Fix VMX fix for memcpy case driver/mtd:IFC NAND:Initialise internal SRAM before any write powerpc/fsl-pci: use 'Header Type' to identify PCIE mode powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get powerpc: Remove tlb batching hack for nighthawk powerpc: Set paca->data_offset = 0 for boot cpu powerpc/perf: Sample only if SIAR-Valid bit is set in P7+ powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled powerpc/mpc85xx: Update interrupt handling for IFC controller powerpc/85xx: Enable USB support in p1023rds_defconfig powerpc/smp: Do not disable IPI interrupts during suspend powerpc/eeh: Fix crash on converting OF node to edev powerpc/eeh: Lock module while handling EEH event powerpc/kprobe: Don't emulate store when kprobe stwu r1 powerpc/kprobe: Complete kprobe and migrate exception frame powerpc/kprobe: Introduce a new thread flag powerpc: Remove unused __get_user64() and __put_user64() powerpc/eeh: Global mutex to protect PE tree powerpc/eeh: Remove EEH PE for normal PCI hotplug ... 
Pull powerpc updates from Benjamin Herrenschmidt:
 "Some highlights in addition to the usual batch of fixes:

   - 64TB address space support for 64-bit processes by Aneesh Kumar

   - Gavin Shan did a major cleanup & re-organization of our EEH support
     code (IBM fancy PCI error handling & recovery infrastructure) which
     paves the way for supporting different platform backends, along
     with some rework of the PCIe code for the PowerNV platform in order
     to remove home made resource allocations and instead use the
     generic code (which is possible after some small improvements to it
     done by Gavin).

   - Uprobes support by Ananth N Mavinakayanahalli

   - A pile of embedded updates from Freescale folks, including new SoC
     and board supports, more KVM stuff including preparing for 64-bit
     BookE KVM support, ePAPR 1.1 updates, etc..."

Fixup trivial conflicts in drivers/scsi/ipr.c

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
  powerpc/iommu: Fix multiple issues with IOMMU pools code
  powerpc: Fix VMX fix for memcpy case
  driver/mtd:IFC NAND:Initialise internal SRAM before any write
  powerpc/fsl-pci: use 'Header Type' to identify PCIE mode
  powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get
  powerpc: Remove tlb batching hack for nighthawk
  powerpc: Set paca->data_offset = 0 for boot cpu
  powerpc/perf: Sample only if SIAR-Valid bit is set in P7+
  powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled
  powerpc/mpc85xx: Update interrupt handling for IFC controller
  powerpc/85xx: Enable USB support in p1023rds_defconfig
  powerpc/smp: Do not disable IPI interrupts during suspend
  powerpc/eeh: Fix crash on converting OF node to edev
  powerpc/eeh: Lock module while handling EEH event
  powerpc/kprobe: Don't emulate store when kprobe stwu r1
  powerpc/kprobe: Complete kprobe and migrate exception frame
  powerpc/kprobe: Introduce a new thread flag
  powerpc: Remove unused __get_user64() and __put_user64()
  powerpc/eeh: Global mutex to protect PE tree
  powerpc/eeh: Remove EEH PE for normal PCI hotplug
  ...