linux.git/Documentation/devicetree/bindings/mips, branch v4.12

MIPS: DTS: img: add device tree for Marduk board

2017-01-03T15:34:41+00:00

Add support for Imagination Technologies' Marduk board which is based
on Pistachio SoC. It is also known as Creator Ci40. Marduk is legacy
name and will be there for decades.

Documentation for this board can be found on
https://docs.creatordev.io/ci40/

This patch adds initial support for board with following peripherals:

* PWM based heartbeat LED
* GPIO based buttons
* SPI NOR flash on SPI1
* UART0 and UART1
* SD card
* Ethernet
* USB
* PWM
* ADC
* I2C

Signed-off-by: Rahul Bedarkar 
Acked-by: Rob Herring 
Acked-by: James Hartley 
Cc: Mark Rutland 
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14394/
Signed-off-by: Ralf Baechle

MIPS: BMIPS: Add BCM6362 support

2016-10-04T14:13:57+00:00

BCM6362 is a BMIPS4350 SoC which needs the same fixup as BCM6368 in order to
enable SMP support.

Signed-off-by: Álvaro Fernández Rojas 
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13845/
Signed-off-by: Ralf Baechle

MIPS: BMIPS: Add BCM3368 support

2016-10-04T14:13:57+00:00

BCM3368 has a shared TLB which conflicts with current SMP support, so it must
be disabled for now.

Signed-off-by: Álvaro Fernández Rojas 
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13840/
Signed-off-by: Ralf Baechle

MIPS: devicetree: fix cpu interrupt controller node-names

2016-05-28T10:35:12+00:00

Here is the quote from [1]:

    The unit-address must match the first address specified
    in the reg property of the node. If the node has no reg property,
    the @ and unit-address must be omitted and the node-name alone
    differentiates the node from other nodes at the same level

This patch adjusts MIPS dts-files and devicetree binding
documentation in accordance with [1].

    [1] Power.org(tm) Standard for Embedded Power Architecture(tm)
        Platform Requirements (ePAPR). Version 1.1 – 08 April 2011.
        Chapter 2.2.1.1 Node Name Requirements

Signed-off-by: Antony Pavlov 
Cc: Paul Burton 
Cc: Zubair Lutfullah Kakakhel 
Cc: Rob Herring 
Cc: Pawel Moll 
Cc: Mark Rutland 
Cc: Ian Campbell 
Cc: Kumar Gala 
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13345/
Acked-by: Rob Herring 
Signed-off-by: Ralf Baechle

MIPS: BMIPS: Add support for BCM63268

2016-05-13T12:02:09+00:00

This SoC is very similar to BCM63168 and Broadcom usually refers to them as
BCM63268.
Add BCM63268 and missing BCM63168 to device tree documentation.

Signed-off-by: Álvaro Fernández Rojas 
Acked-by: Rob Herring 
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13042/
Signed-off-by: Ralf Baechle

MIPS: BMIPS: Add device tree example for BCM6358

2016-05-13T12:02:09+00:00

This adds a device tree example for SFR Neufbox4 (Sercomm version), which
also serves as a real example for brcm,bcm6358-leds.

Signed-off-by: Álvaro Fernández Rojas 
Acked-by: Rob Herring 
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13041/
Signed-off-by: Ralf Baechle

MIPS: OCTEON: Add support for OCTEON III interrupt controller.

2016-05-13T12:01:41+00:00

Add irq_chip support for both IPI and "normal" interrupts of the CIU3
controller.  Document the device tree binding for the CIU3.

Some functions are non-static as they will be used by follow-on
support for MSI-X.

Signed-off-by: David Daney 
Acked-by: Rob Herring 
Cc: Rob Herring 
Cc: Pawel Moll 
Cc: Mark Rutland 
Cc: Ian Campbell 
Cc: Kumar Gala 
Cc: devicetree@vger.kernel.org
Cc: Thomas Gleixner 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12500/
Signed-off-by: Ralf Baechle

libata: support AHCI on OCTEON platform

2016-02-11T15:12:04+00:00

The OCTEON SATA controller is currently found on cn71XX devices.

Acked-by: Arnd Bergmann 
Acked-by: Hans de Goede 
Acked-by: Rob Herring 
Signed-off-by: David Daney 
Signed-off-by: Vinita Gupta 
Signed-off-by: Aleksey Makarov 
Signed-off-by: Zubair Lutfullah Kakakhel 
Signed-off-by: Tejun Heo

dt/bindings: Add bindings for PIC32/MZDA platforms

2016-01-24T01:53:03+00:00

This adds support for the Microchip PIC32 platform along with the
specific variant PIC32MZDA on a PIC32MZDA Starter Kit.

Signed-off-by: Joshua Henderson 
Acked-by: Rob Herring 
Cc: Pawel Moll 
Cc: Mark Rutland 
Cc: Ian Campbell 
Cc: Kumar Gala 
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12096/
Signed-off-by: Ralf Baechle

dt-bindings: MIPS: Document xilfpga bindings and boot style

2015-11-11T07:38:38+00:00

Xilfpga boots only with device-tree. Document the required properties
and the unique boot style

Signed-off-by: Zubair Lutfullah Kakakhel 
Cc: robh+dt@kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11361/
Signed-off-by: Ralf Baechle